1,387 research outputs found
Dynamics of a tunable superfluid junction
We study the population dynamics of a Bose-Einstein condensate in a
double-well potential throughout the crossover from Josephson dynamics to
hydrodynamics. At barriers higher than the chemical potential, we observe slow
oscillations well described by a Josephson model. In the limit of low barriers,
the fundamental frequency agrees with a simple hydrodynamic model, but we also
observe a second, higher frequency. A full numerical simulation of the
Gross-Pitaevskii equation giving the frequencies and amplitudes of the observed
modes between these two limits is compared to the data and is used to
understand the origin of the higher mode. Implications for trapped matter-wave
interferometers are discussed.Comment: 8 pages, 7 figures; v3: Journal reference added, minor changes to
tex
Towards resolving mechanisms of particle shrinking during biomass pyrolysis via micro-computed tomography and in-situ radiography
Variations in visceral leishmaniasis burden, mortality and the pathway to care within Bihar, India
BACKGROUND: Visceral leishmaniasis (VL) has been targeted by the WHO for elimination as a public health problem (< 1 case/10,000 people/year) in the Indian sub-continent (ISC) by 2020. Bihar State in India, which accounts for the majority of cases in the ISC, remains a major target for this elimination effort. However, there is considerable spatial, temporal and sub-population variation in occurrence of the disease and the pathway to care, which is largely unexplored and a threat to achieving the target. METHODS: Data from 6081 suspected VL patients who reported being clinically diagnosed during 2012-2013 across eight districts in Bihar were analysed. Graphical comparisons and Chi-square tests were used to determine differences in the burden of identified cases by season, district, age and sex. Log-linear regression models were fitted to onset (of symptoms)-to-diagnosis and onset-to-treatment waiting times to estimate their associations with age, sex, district and various socio-economic factors (SEFs). Logistic regression models were used to identify factors associated with mortality. RESULTS: Comparisons of VL caseloads suggested an annual cycle peaking in January-March. A 17-fold variation in the burden of identified cases across districts and under-representation of young children (0-5 years) relative to age-specific populations in Bihar were observed. Women accounted for a significantly lower proportion of the reported cases than men (41 vs 59%, P < 0.0001). Age, district of residence, house wall materials, caste, treatment cost, travelling for diagnosis and the number of treatments for symptoms before diagnosis were identified as correlates of waiting times. Mortality was associated with age, district of residence, onset-to-treatment waiting time, treatment duration, cattle ownership and cost of diagnosis. CONCLUSIONS: The distribution of VL in Bihar is highly heterogeneous, and reported caseloads and associated mortality vary significantly across different districts, posing different challenges to the elimination campaign. Socio-economic factors are important correlates of these differences, suggesting that elimination will require tailoring to population and sub-population circumstances
Breakdown of Scaling in the Nonequilibrium Critical Dynamics of the Two-Dimensional XY Model
The approach to equilibrium, from a nonequilibrium initial state, in a system
at its critical point is usually described by a scaling theory with a single
growing length scale, , where z is the dynamic exponent
that governs the equilibrium dynamics. We show that, for the 2D XY model, the
rate of approach to equilibrium depends on the initial condition. In
particular, if no free vortices are present in the
initial state, while if free vortices are
present.Comment: 4 pages, 3 figure
The origin of overpotential in lithium-mediated nitrogen reduction
The verification of the lithium-mediated nitrogen reduction system in 2019 has led to an explosion in the literature focussing on improving the metrics of faradaic efficiency, stability, and activity. However, while the literature acknowledges the vast intrinsic overpotential for nitrogen reduction due to the reliance on in situ lithium plating, it has thus far been difficult to accurately quantify this overpotential and effectively analyse further voltage losses. In this work, we present a simple method for determining the Reversible Hydrogen Electrode (RHE) potential in the lithium-mediated nitrogen reduction system. This method allows for an investigation of the Nernst equation and reveals sources of potential losses. These are namely the solvation of the lithium ion in the electrolyte and resistive losses due to the formation of the solid electrolyte interphase. The minimum observed overpotential was achieved in a 0.6 M LiClO4, 0.5 vol% ethanol in tetrahydrofuran electrolyte. This was −3.59 ± 0.07 V vs. RHE, with a measured faradaic efficiency of 6.5 ± 0.2%. Our method allows for easy comparison between the lithium-mediated system and other nitrogen reduction paradigms, including biological and homogeneous mechanisms
Dehydropeptide supramolecular hydrogels and nanostructures as potential peptidomimetic biomedical materials
Supramolecular peptide hydrogels are gaining increased attention, owing to their potential in a variety of biomedical applications. Their physical properties are similar to those of the extracellular matrix (ECM), which is key to their applications in the cell culture of specialized cells, tissue engineering, skin regeneration, and wound healing. The structure of these hydrogels usually consists of a di- or tripeptide capped on the N-terminus with a hydrophobic aromatic group, such as Fmoc or naphthalene. Although these peptide conjugates can offer advantages over other types of gelators such as cross-linked polymers, they usually possess the limitation of being particularly sensitive to proteolysis by endogenous proteases. One of the strategies reported that can overcome this barrier is to use a peptidomimetic strategy, in which natural amino acids are switched for non-proteinogenic analogues, such as D-amino acids, β-amino acids, or dehydroamino acids. Such peptides usually possess much greater resistance to enzymatic hydrolysis. Peptides containing dehydroamino acids, i.e., dehydropeptides, are particularly interesting, as the presence of the double bond also introduces a conformational restraint to the peptide backbone, resulting in (often predictable) changes to the secondary structure of the peptide. This review focuses on peptide hydrogels and related nanostructures, where α,β-didehydro-α-amino acids have been successfully incorporated into the structure of peptide hydrogelators, and the resulting properties are discussed in terms of their potential biomedical applications. Where appropriate, their properties are compared with those of the corresponding peptide hydrogelator composed of canonical amino acids. In a wider context, we consider the presence of dehydroamino acids in natural compounds and medicinally important compounds as well as their limitations, and we consider some of the synthetic strategies for obtaining dehydropeptides. Finally, we consider the future direction for this research area.This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding of CQUM (UID/QUI/00686/2019). FCT, FEDER, PORTUGAL2020 and COMPETE2020 are also acknowledged for funding under research project PTDC/QUI-QOR/29015/2017 (POCI-01-0145-FEDER-029015)
Hydrogels and nanostructures formed from ciprofloxacin–peptide conjugates
Ciprofloxacin is a broad-spectrum fluoroquinolone antibiotic that possesses potent activity against both Gram-positive and Gram-negative bacteria and is used to treat many infections. Despite its widespread use, ciprofloxacin is associated with side effects, which might be reduced by improving its pharmacokinetic properties. The chemical structure of ciprofloxacin is the source of some of its limitations, which include: (1) Poor membrane permeability due to lipophobicity caused by the presence of polar groups; and (2) poor transportation and absorption due to poor water solubility caused by the flat aromatic structure. Previous methods for improving the pharmacokinetic properties of ciprofloxacin have involved the synthesis of conjugates. Issues related to poor membrane permeability, transportation and absorption of drugs can also be improved by employing nanocarriers and nanomaterials. Encapsulation within nanocarriers allows targeted drug delivery and reduced side effects as lower doses of the drug can be administered. Nanocarriers that can be used for this purpose include nanoparticles and hydrogels. Our research group is interested in supramolecular hydrogels as drug delivery systems. Short amphiphilic peptides are often able to form hydrogels through self-assembly. This present work describes the synthesis of a ciprofloxacin–dehydropeptide conjugate with the aim of forming hydrogels and related nanostructures to be used for the ‘self-delivery’ of antibacterial compounds. We assessed the hydrogelation ability, antibacterial activity, and pharmacokinetic properties. TEM microscopy revealed nanotubes and nanospheres. The conjugate was unable to form hydrogels alone but was able to form hydrogels as the major component of a co-gel with another peptide gelator. Although the conjugate retained antibacterial activity at 400 µM, activity diminished at lower concentrations. Thus, future work should focus on more hydrolysable pro-drug versions of the conjugate or versions where the peptide is connected at an alternate position.This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding of CQUM (UID/QUI/00686/2019). FCT, FEDER, PORTUGAL2020, and COMPETE2020 are also acknowledged for funding under research project PTDC/QUI-QOR/29015/2017 (POCI-01-0145-FEDER-029015)
Data for an Advanced Microstructural and Electrochemical Datasheet on 18650 Li-ion Batteries with Nickel-Rich NMC811 Cathodes and Graphite-Silicon Anodes
The data presented here were collected from a commercial LG Chem cylindrical INR18650 MJ1 lithium-ion (Li-ion) battery (approximate nominal specifications: 3.5 Ah, 3.6 V, 12.2 Wh). Electrochemical and microstructural information is presented, the latter collected across several length scales using X-ray computed tomography (CT): from cell to particle. One cell-level tomogram, four assembly-level and two electrode/particle-level 3D datasets are available; all data was collected in the pristine state. The electrochemical data consists of the full current and voltage charge-discharge curves for 400 operational cycles. All data has been made freely available via a repository [10.5522/04/c.4994651] in order to aid in the development of improved computational models for commercially-relevant Li-ion battery materials
A greyscale erosion algorithm for tomography (GREAT) to rapidly detect battery particle defects
Particle micro-cracking is a major source of performance loss within lithium-ion batteries, however early detection before full particle fracture is highly challenging, requiring time consuming high-resolution imaging with poor statistics. Here, various electrochemical cycling (e.g., voltage cut-off, cycle number, C-rate) has been conducted to study the degradation of Ni-rich NMC811 (LiNi0.8Mn0.1Co0.1O2) cathodes characterized using laboratory X-ray micro-computed tomography. An algorithm has been developed that calculates inter- and intra-particle density variations to produce integrity measurements for each secondary particle, individually. Hundreds of data points have been produced per electrochemical history from a relatively short period of characterization (ca. 1400 particles per day), an order of magnitude throughput improvement compared to conventional nano-scale analysis (ca. 130 particles per day). The particle integrity approximations correlated well with electrochemical capacity losses suggesting that the proposed algorithm permits the rapid detection of sub-particle defects with superior materials statistics not possible with conventional analysis
Peptide-based supramolecular hydrogels as drug delivery agents: recent advances
Supramolecular peptide hydrogels have many important applications in biomedicine,
including drug delivery applications for the sustained release of therapeutic molecules. Targeted and selective drug administration is often preferential to systemic drug delivery, as it can allow reduced doses and can avoid the toxicity and side-effects caused by off-target binding. New discoveries are continually being reported in this rapidly developing field. In this review, we report the latest developments in supramolecular peptide-based hydrogels for drug delivery, focusing primarily on discoveries that have been reported in the last four years (2018–present). We address clinical points, such as peptide self-assembly and drug release, mechanical properties in drug delivery, peptide functionalization, bioadhesive properties and drug delivery enhancement strategies, drug release profiles, and different hydrogel matrices for anticancer drug loading and release.This work was supported by the Portuguese Foundation for Science and Technology
(FCT) in the framework of the Strategic Funding of CQUM (UID/QUI/00686/2019). FCT, FEDER,
PORTUGAL2020 and COMPETE2020 are also acknowledged for funding under research project
PTDC/QUI-QOR/29015/2017 (POCI-01-0145-FEDER-029015)
- …