Modeling of RC shear walls using shear spring and fiber elements for seismic performance assessment

Reinforced concrete shear wall is one of the most effective members during severe lateral loads especially in earthquakes and winds. Extensive researches, both analytical and experimental, have been carried out to study the behavior of reinforced concrete (RC) shear walls. Predicting inelastic response of RC walls and wall systems requires accurate, effective, and robust analytical model that incorporate important material characteristics and behavioral response features. In this study, a modeling method using fiber and spring elements is developed to capture inelastic responses of an RC shear wall. The fiber elements and the spring reflect flexural and shear behaviors of the shear wall, respectively. The fiber elements are built by inputting section data and material properties. The parameters of the shear spring that represent strength and stiffness degradation, pinching, and slip are determined based on analysis results from a detailed finite element method (FEM) model. The reliability of the FEM analysis program is verified. The applicability of the proposed modeling method is investigated by performing inelastic dynamic analyses for reference buildings with various aspect ratios of shear walls

Modeling of RC shear walls using shear spring and fiber elements for seismic performance assessment

Reinforced concrete shear wall is one of the most effective members during severe lateral loads especially in earthquakes and winds. Extensive researches, both analytical and experimental, have been carried out to study the behavior of reinforced concrete (RC) shear walls. Predicting inelastic response of RC walls and wall systems requires accurate, effective, and robust analytical model that incorporate important material characteristics and behavioral response features. In this study, a modeling method using fiber and spring elements is developed to capture inelastic responses of an RC shear wall. The fiber elements and the spring reflect flexural and shear behaviors of the shear wall, respectively. The fiber elements are built by inputting section data and material properties. The parameters of the shear spring that represent strength and stiffness degradation, pinching, and slip are determined based on analysis results from a detailed finite element method (FEM) model. The reliability of the FEM analysis program is verified. The applicability of the proposed modeling method is investigated by performing inelastic dynamic analyses for reference buildings with various aspect ratios of shear walls

Improvement of retinoids production in recombinant E. coli using glyoxylic acid

Isoprenoids are the most chemically diverse compounds found in nature. They are present in all organisms and have essential roles in membrane structure, redox chemistry, reproductive cycles, growth regulation, signal transduction and defense mechanisms. In spite of their diversity of functions and structures, all isoprenoids are derived from the common building blocks of isopentenyl diphosphate (IPP) and its isomer dimethylallyl diphosphate (DMAPP). Optimization of IPP synthesis pathway is of benefit to mass production of various isoprenoids. There are two pathways of 2-C-Methyl-D-erythritol-4-phosphate (MEP) and mevalonate (MVA) for IPP synthesis. Prokaryotes including E. coli generally use MEP pathway whereas MVA pathway is used in eukaryotes. To improve isoprenoid production, it was performed the deletion of genes in E. coli, which are involved in both formation of fermentation by-products such as organic acids and alcohols, and consumption of precursors of MEP and MVA pathways, pyruvate and acetyl-CoA. As a result, we were able to develop a strain with improved fermentation productivity and carbon source utilization efficiency, the mutant strain was called AceCo. Higher lycopene production was achieved in the AceCo strain compared to the wild type MG1655 strain due to no formation of the inhibitory by-products. However, retinoids production of AceCo strain decreased to a half of that of MG1655 strain. Please click Additional Files below to see the full abstract

Sequential whole cell conversion process for production of D-psicose and D- mannitol from D-fructose

Rare sugars, which exist only limited quantities naturally, have received considerable attention because of its various specific nutritional and biological functions. Likewise, D-psicose (D-ribo-2-hexulose or D-allulose), a C-3 epimer of D-fructose, has many uses which include reducing intra-abdominal fat accumulation, protecting pancreas beta-islets and improving insulin sensitivity. Especially, D-psicose has only 0.3% calories compared to sucrose, while it has 70% relative sweetness. Additionally, in 2012, D-psicose was approved as a food additive and designated as Generally Recognized As Safe (GRAS) by Food and Drug Administration (FDA). Despite such abundant advantages, there is no economical way of mass production of D-psicose. Recently, biological production of D-psicose from D-fructose using D-psicose 3-epimerase (DPE) has been developed. However, the conversion yield is below 30%, which causes an undesirable increase of purification cost because of the similar solubility of D-psicose and D-fructose. Thus, we addressed the problem by converting the residual fructose, after the reaction of D-psicose production, to D-mannitol, which has a low solubility. The sequential whole cell conversion reactions for D-psicose and D-mannitol allow a convenient and economic purification of both products. This work was supported by a grant from the Next-Generation BioGreen 21 Program (SSAC, grant#: PJ01106201), RDA, Korea. Reference 1) Carsten Bäumchen & Stephanie Bringer-Meyer (2007), Expression of glf Z.m. increases D-mannitol formation in whole cell biotransformation with resting cells of Corynebacterium glutamicum, Appl Microbiol Biotechnol 76(3):545–52. 2) Ortiz, M. E., Bleckwedel, J., Raya, R. R., & Mozzi, F. (2013). Biotechnological and in situ food production of polyols by lactic acid bacteria, Appl Microbiol Biotechnol 97:4713-4726 3) Park, Y., Oh, E. J., Jo, J., Jin, Y., & Seo, J. (2016). Recent advances in biological production of sugar alcohols. Curr Opin Biotechnol 37:105–113

Effects of OH radicals on formation of Cu oxide and polishing performance in Cu Chemical Mechanical Polishing

The amount of OH radicals generated varied according to the complexing agent or Cu ion, and the accelerating effect of OH radicals on the rate of Cu oxide formation was found in acidic pH. When Cu I ions and oxalic acid were added to H2O2-based slurry, the decreases in etch and removal rates of Cu were observed because more generation of OH radicals resulted in the formation of thicker Cu oxide compared to additive-free slurry. Therefore, proper control of the formation and dissolution of Cu oxide led to an increase in etch and removal rates.This work was supported by the KOSEF through the Research Center for Energy Conversion and Storage (RCECS), Hanhwa Chemical, Ltd., and by the Institute of Chemical Processes (ICP) in Seoul National University

Effect of the glyceryl monooleate-based lyotropic phases on skin permeation using in vitro diffusion and skin imaging

AbstractGlyceryl monooleate (GMO) is a polar lipid that can exist in various liquid crystalline phases in the presence of different amounts of water. It is regarded as a permeation enhancer due to its amphiphilic property. Various phases of GMO/solvent system containing sodium fluorescein were prepared to compare permeability using confocal laser scanning microscopy (CLSM). GMO was melted in a vial in a water bath heated to 45 °C. Propylene glycol and hexanediol were homogeneously dissolved in the melted GMO. Sodium fluorescein in aqueous solution was diluted to various ratios and thoroughly mixed by an ultrasonic homogenizer. Each GMO/Solvent system with fluorescein was applied onto the epidermal side of excised pig skin and incubated overnight. CLSM was performed to observe how the GMO/solvent system in its different phases affect skin permeability. Cubic and lamellar phase formulations enhanced the fluorescein permeation through the stratum corneum. A solution system had the weakest permeability compared to the other two phases. Due to the amphiphilic nature of GMO, cubic and lamellar phases might reduce the barrier function of stratum corneum which was observed by CLSM as fluorescein accumulated in the dermis. Based on the results, the glyceryl monooleate lyotropic mixtures could be applied to enhance skin permeation in various topical and transdermal formulations

The effects of curcumin on the fibrous envelope surrounding silicone implants in rats

Background Capsular contracture is the most common serious breast surgery complication. The cause of capsular formation remains unknown, but chronic inflammation is commonly considered to cause excessive fibrosis. Curcumin has anti-inflammatory effects and thus can relieve the symptoms of inflammatory diseases, as demonstrated in animal studies. This study aimed to evaluate the effects of curcumin on the fibrous envelope covering silicone implants in a rat model. Methods Two solid 1.8-cm oval-shaped silicone implants were placed beneath both sides of the back in 20 Sprague-Dawley rats. The control group included 10 rats that were fed a normal diet (group A), while the experimental group (group B) included the remaining 10 rats that were fed ground curcumin. En bloc excision was conducted at 8 postoperative weeks. Capsular thickness and inflammatory cell distribution were examined using a fixed tissue sample. Results Gross findings and histologic differences between the groups were observed. The experimental group had a significantly lower mean total capsular thickness than the control group (177.4±31.4 μm vs. 145.9±32.5 μm, P=0.007). A significant decreasing tendency was found in several inflammatory cells in the experimental group (7,070±744.3/mm2 vs. 2,640±301.7/mm2, P=0.001). Conclusions Curcumin significantly reduced the inflammatory reaction, and will help to lower the risk of capsular contracture. Long-term studies are required to determine whether this hypothesis can provide a basis for a viable therapeutic strategy to reduce capsular contracture