7,330 research outputs found
Trapping and displacement of liquid collars and plugs in rough-walled tubes
A liquid film wetting the interior of a long circular cylinder redistributes
under the action of surface tension to form annular collars or occlusive plugs.
These equilibrium structures are invariant under axial translation within a
perfectly smooth uniform tube and therefore can be displaced axially by very
weak external forcing. We consider how this degeneracy is disrupted when the
tube wall is rough, and determine threshold conditions under which collars or
plugs resist displacement under forcing. Wall roughness is modelled as a
non-axisymmetric Gaussian random field of prescribed correlation length and
small variance, mimicking some of the geometric irregularities inherent in
applications such as lung airways. The thin film coating this surface is
modelled using lubrication theory. When the roughness is weak, we show how the
locations of equilibrium collars and plugs can be identified in terms of the
azimuthally averaged tube radius; we derive conditions specifying equilibrium
collar locations under an externally imposed shear flow, and plug locations
under an imposed pressure gradient. We use these results to determine the
probability of external forcing being sufficient to displace a collar or plug
from a rough-walled tube, when the tube roughness is defined only in
statistical terms
Drop spreading with random viscosity
We examine theoretically the spreading of a viscous liquid drop over a thin
film of uniform thickness, assuming the liquid's viscosity is regulated by the
concentration of a solute that is carried passively by the spreading flow. The
solute is assumed to be initially heterogeneous, having a spatial distribution
with prescribed statistical features. To examine how this variability
influences the drop's motion, we investigate spreading in a planar geometry
using lubrication theory, combining numerical simulations with asymptotic
analysis. We assume diffusion is sufficient to suppress solute concentration
gradients across but not along the film. The solute field beneath the bulk of
the drop is stretched by the spreading flow, such that the initial solute
concentration immediately behind the drop's effective contact lines has a
long-lived influence on the spreading rate. Over long periods, solute swept up
from the precursor film accumulates in a short region behind the contact line,
allowing patches of elevated viscosity within the precursor film to hinder
spreading. A low-order model provides explicit predictions of the variances in
spreading rate and drop location, which are validated against simulations
Drop spreading and drifting on a spatially heterogeneous film: capturing variability with asymptotics and emulation
A liquid drop spreading over a thin heterogeneous precursor film (such as an
inhaled droplet on the mucus-lined wall of a lung airway) will experience
perturbations in shape and location as its advancing contact line encounters
regions of low or high film viscosity. Prior work on spatially one-dimensional
spreading over a precursor film having a random viscosity field [Xu & Jensen
2016, Proc. Roy. Soc. A 472, 20160270] has demonstrated how viscosity
fluctuations are swept into a narrow region behind the contact line, where they
can impact drop dynamics. Here we investigate two-dimensional drops, seeking to
understand the relationship between the statistical properties of the precursor
film and those of the spreading drop. Assuming the precursor film is much
thinner than the drop and viscosity fluctuations are weak, we use asymptotic
methods to derive explicit predictions for the mean and variance of drop area
and the drop's lateral drift. For larger film variability, we use Gaussian
process emulation to estimate the variance of outcomes from a restricted set of
simulations. Stochastic drift of the droplet is predicted to be greatest when
the initial drop diameter is comparable to the correlation length of viscosity
fluctuations.Comment: 23 pages, 5 figure
Stochastic transport in the presence of spatial disorder: fluctuation-induced corrections to homogenization
Motivated by uncertainty quantification in natural transport systems, we
investigate an individual-based transport process involving particles
undergoing a random walk along a line of point sinks whose strengths are
themselves independent random variables. We assume particles are removed from
the system via first-order kinetics. We analyse the system using a hierarchy of
approaches when the sinks are sparsely distributed, including a stochastic
homogenization approximation that yields explicit predictions for the extrinsic
disorder in the stationary state due to sink strength fluctuations. The
extrinsic noise induces long-range spatial correlations in the particle
concentration, unlike fluctuations due to the intrinsic noise alone.
Additionally, the mean concentration profile, averaged over both intrinsic and
extrinsic noise, is elevated compared with the corresponding profile from a
uniform sink distribution, showing that the classical homogenization
approximation can be a biased estimator of the true mean.Comment: 16 pages, 8 figure
Relating cell shape and mechanical stress in a spatially disordered epithelium using a vertex-based model
Using a popular vertex-based model to describe a spatially disordered planar
epithelial monolayer, we examine the relationship between cell shape and
mechanical stress at the cell and tissue level. Deriving expressions for stress
tensors starting from an energetic formulation of the model, we show that the
principal axes of stress for an individual cell align with the principal axes
of shape, and we determine the bulk effective tissue pressure when the
monolayer is isotropic at the tissue level. Using simulations for a monolayer
that is not under peripheral stress, we fit parameters of the model to
experimental data for Xenopus embryonic tissue. The model predicts that
mechanical interactions can generate mesoscopic patterns within the monolayer
that exhibit long-range correlations in cell shape. The model also suggests
that the orientation of mechanical and geometric cues for processes such as
cell division are likely to be strongly correlated in real epithelia. Some
limitations of the model in capturing geometric features of Xenopus epithelial
cells are highlighted.Comment: 29 pages, 10 figures, revisio
Local and global instabilities of flow in a flexible-walled channel
We consider laminar high-Reynolds-number flow through a long finite-length planar channel, where a segment of one wall is replaced by a massless membrane held under longitudinal tension. The flow is driven by a fixed pressure difference across the channel and is described using an integral form of the unsteady boundary-layer equations. The basic flow state, for which the channel has uniform width, exhibits static and oscillatory global instabilities, having distinct modal forms. In contrast, the corresponding local problem (neglecting boundary conditions associated with the rigid parts of the system) is found to be convectively, but not absolutely, unstable to small-amplitude disturbances in the absence of wall damping. We show how amplification of the primary global oscillatory instability can arise entirely from wave reflections with the rigid parts of the system, involving interacting travelling wave flutter and static-divergence modes that are convectively stable; alteration of the mean flow by oscillations makes the onset of this primary instability subcritical. We also show how distinct mechanisms of energy transfer differentiate the primary global mode from other modes of oscillatory instability
Mechanical characterization of disordered and anisotropic cellular monolayers
We consider a cellular monolayer, described using a vertex-based model, for
which cells form a spatially disordered array of convex polygons that tile the
plane. Equilibrium cell configurations are assumed to minimize a global energy
defined in terms of cell areas and perimeters; energy is dissipated via dynamic
area and length changes, as well as cell neighbour exchanges. The model
captures our observations of an epithelium from a Xenopus embryo showing that
uniaxial stretching induces spatial ordering, with cells under net tension
(compression) tending to align with (against) the direction of stretch, but
with the stress remaining heterogeneous at the single-cell level. We use the
vertex model to derive the linearized relation between tissue-level stress,
strain and strain-rate about a deformed base state, which can be used to
characterize the tissue's anisotropic mechanical properties; expressions for
viscoelastic tissue moduli are given as direct sums over cells. When the base
state is isotropic, the model predicts that tissue properties can be tuned to a
regime with high elastic shear resistance but low resistance to area changes,
or vice versa.Comment: 9 figure
Recommended from our members
Secure protocols for contactless credit cards and electronic wallets
The contactless credit card protocol in use today is insecure. The credit card industry has chosen to use the NFC channel for contactless transactions. However, reliance on NFC's short range has led to poor assumptions in the contactless credit card protocol. For example, the card assumes (sometimes incorrectly) that its ability to receive a solicitation implies the cardholder's intent to purchase. In this dissertation, we examine the protocol currently in use, and present a family of three replacement protocols to defend against its deficiencies.
First, we consider "outsider" attacks (e.g. eavesdropping, skimming attacks, relay attacks, and attacks facilitated by compromised points of sale) and design our first protocol to defend against these attacks. We call this protocol the Externally Secure CC Protocol, and design it using stepwise refinement. This protocol makes use of single-use "charge tokens" verifiable by the bank, while minimizing computation that needs to occur on the card.
Second, we identify two attacks which may be carried out by malicious retailers: Over-charge attacks and Transparent Bridge attacks. Both attacks are predicated on the customer's lack of participation in the protocol, and involve modifying or replacing a charge after it has been confirmed by the customer. We look to Electronic Wallet applications (such as Android Pay and Apple Wallet), which provide a channel between customer and card. We augment the Externally Secure CC Protocol using this channel to construct the Secure CC Protocol, binding charge tokens to a given price, and thus stymieing both outsider and malicious retailer attacks.
The Secure CC Protocol supports a property known as linkability: while only the bank can verify charge tokens, tokens from the same card can be recognized as such by the retailer. This property is also supported by the (insecure) protocol in use today, and is commonly used by retailers to construct marketing profiles on their customers. However, linkability has serious consumer privacy consequences, so we consider the converse property of unlinkability, where a retailer cannot identify different purchases as having been made by the same card. We require that our unlinkable protocol make use of existing infrastructure, so as not to require retailer cooperation. In response, we design the Unlinkable Wallet Protocol, leveraging techniques from the Secure CC Protocol to guard against malicious outsiders and retailers, while tunneling secure and unlinkable charge tokens through the protocol in use today.Computer Science
Couple stresses and discrete potentials in the vertex model of cellular monolayers
The vertex model is widely used to simulate the mechanical properties of
confluent epithelia and other multicellular tissues. This inherently discrete
framework allows a Cauchy stress to be attributed to each cell, and its
symmetric component has been widely reported, at least for planar monolayers.
Here we consider the stress attributed to the neighbourhood of each tricellular
junction, evaluating in particular its leading-order antisymmetric component
and the associated couple stresses, which characterise the degree to which
individual cells experience (and resist) in-plane bending deformations. We
develop discrete potential theory for localised monolayers having disordered
internal structure and use this to derive the analogues of Airy and Mindlin
stress functions. These scalar potentials typically have broad-banded spectra,
highlighting the contributions of small-scale defects and boundary-layers to
global stress patterns. An affine approximation attributes couple stresses to
pressure differences between cells sharing a trijunction, but simulations
indicate an additional role for non-affine deformations.Comment: 8 figures, 1 tabl
- …