A new critical study of photon production in hadronic collisions

In the light of the new prompt photon data collected by PHENIX at RHIC and by D0 at the run II of the Tevatron, we revisit the world prompt photon data, both inclusive and isolated, in hadronic collisions, and compare them with the NLO QCD calculations implemented in the Monte Carlo programme JETPHOX.Comment: 19 pages; 12 figure

Tool-life and wear mechanisms of CBN tools in machining of Inconel 718

The demand for increasing productivity when machining heat resistant alloys has resulted in the use of new tool materials such as cubic boron nitride (CBN) or ceramics. However, CBN tools are mostly used by the automotive industry in hard turning, and the wear of those tools is not sufficiently known in aerospace materials. In addition, the grade of these tools is not optimized for superalloys due to these being a small part of the market, although expanding (at 20% a year). So this investigation has been conducted to show which grade is optimal and what the wear mechanisms are during finishing operations of Inconel 718. It is shown that a low CBN content with a ceramic binder and small grains gives the best results. The wear mechanisms on the rake and flank faces were investigated. Through SEM observations and chemical analysis of the tested inserts, it is shown that the dominant wear mechanisms are adhesion and diffusion due to chemical affinity between elements from workpiece and insert

Polariton quantum boxes in semiconductor microcavities

We report on the realization of polariton quantum boxes in a semiconductor microcavity under strong coupling regime. The quantum boxes consist of mesas that confine the cavity photon, etched on top of the spacer of a microcavity. For mesas with sizes of the order of a few micron in width and nm in depth, we observe quantization, caused by the lateral confinement, of the polariton modes in several peaks. We evidence the strong exciton-photon coupling regime through a typical/clear anticrossing curve for each quantized level. Moreover the growth technique is of high quality, which opens the way for the conception of new optoelectronic devices

NLO Cross Sections for the LHC using GOLEM: Status and Prospects

In this talk we review the GOLEM approach to one-loop calculations and present an automated implementation of this technique. This method is based on Feynman diagrams and an advanced reduction of one-loop tensor integrals which avoids numerical instabilities. We have extended our one-loop integral library golem95 with an automated one-loop matrix element generator to compute the virtual corrections of the process $q\bar{q}\to b\bar{b}b\bar{b}$. The implementation of the virtual matrix element has been interfaced with tree-level Monte Carlo programs to provide the full result for the above process.Comment: 8 pages, 1 figure, contribution to the proceedings of the 9th International Symposium on Radiative Corrections (RADCOR 2009), October 25-30 2009, Ascona, Switzerlan

One-loop Multi-leg Calculation in Gauge Theories (Golem95 Library)

Les calculs de précision dans les théories de jauge jouent un rôle très important pour l étude de la physique du Modèle Standard et au-delà dans les super-collisionneurs de particules comme le LHC, TeVatron et ILC. Par conséquent, il est extrêmement important de fournir des outils du calcul d amplitudes à une boucle stables, rapides, efficaces et hautement automatisés. Cette thèse a pour but de développer la bibliothèque d intégrales Golem95. Cette bibliothèque est un programme écrit en Fortran95, qui contient tous les ingrédients nécessaires pour calculer une intégrale scalaire ou tensorielle à une boucle avec jusqu à six pattes externes. Golem95 utilise une méthode traditionnelle de réduction (réduction à la Golem) qui réduit les facteurs de forme en des intégrales de base redondantes qui peuvent être scalaires (sans paramètres de Feynman au numérateur) ou tensorielles (avec des paramètres de Feynman au numérateur); ce formalisme permet d éviter les problèmes de l instabilité numérique engendrés par des singularités factices dues à l annulation des déterminants de Gram. En plus, cette bibliothèque peut être interfacée avec des programmes du calcul automatique basés sur les méthodes d unitarité comme GoSam par exemple. Les versions antérieures de Golem95 ont été conçues pour le calcul des amplitudes sans masses internes. Le but de ce travail de thèse est de généraliser cette bibliothèque pour les configurations les plus générales (les masses complexes sont incluses), et de fournir un calcul numériquement stable dans les régions problématique en donnant une représentation intégrale unidimensionnelle stable pour chaque intégrale de base de Golem95.Higher order corrections in gauge theories play a crucial role in studying physics within the standard model and beyond at TeV colliders, like LHC, TeVatron and ILC. Therefore, it is of extreme importance to provide tools for next-to-leading order amplitude computation which are fast, stable, efficient and highly automatized. This thesis aims at developing the library of integrals Golem95. This library is a program written in Fortran95, it contains all the necessary ingredients to calculate any one-loop scalar or tensorial integral with up to six external legs. Golem95 uses the traditional reduction method (Golem reduction) to reduce the form factors into redundant basic integrals, which can be scalar (without Feynman parameters in the numerator) or tensorial (with Feynman parameter in the numerator); this formalism allows us to avoid the problems of numerical instabilities generated by the spurious singularities induced by the vanishing of the Gram determinants. In addition, this library can be interfaced with automatic programs of NLO calculation based on the unitarity inspired reduction methods as GoSam for example. Earlierversions of Golem95 were designed for the calculation of amplitudes without internal masses. The purpose of this thesis is to extend this library for more general configurations (complex masses are supported); and to provide numerically stable calculation in the problematic regions (det(G) -> 0), by providing a stable one-dimensional integral representation for each Golem95 basic integral.SAVOIE-SCD - Bib.électronique (730659901) / SudocGRENOBLE1/INP-Bib.électronique (384210012) / SudocGRENOBLE2/3-Bib.électronique (384219901) / SudocSudocFranceF

Modern Feynman Diagrammatic One-Loop Calculations

In this talk we present techniques for calculating one-loop amplitudes for multi-leg processes using Feynman diagrammatic methods in a semi-algebraic context. Our approach combines the advantages of the different methods allowing for a fast evaluation of the amplitude while monitoring the numerical stability of the calculation. In phase space regions close to singular kinematics we use a method avoiding spurious Gram determinants in the calculation. As an application of our approach we report on the status of the calculation of the amplitude for the process $pp\to b\bar{b}b\bar{b}+X$.Comment: 10 pages, 2 figures; contribution to the proceedings of the CPP2010 Workshop, 23-25 Sep. 2010, KEK, Tsukuba, Japa

Cross section of isolated prompt photons in hadron-hadron collisions

We consider the production of isolated prompt photons in hadronic collisions. We present a general discussion in QCD perturbation theory of the isolation criterion used by hadron collider experiments. The isolation criterion is implemented in a computer programme of the Monte Carlo type, which evaluates the production cross section at next-to-leading order accuracy in perturbative QCD. The calculation includes both the direct and the fragmentation components of the cross section, without any approximation of the dependence on the radius R of the isolation cone. We examine the scale dependence of the isolated cross section, the sensitivity of the cross section to the values of the isolation parameters, and we provide a quantitative comparison between the full R dependence and its small-R approximation.Comment: 29 pages, 1 figure, few comments slightly expanded, results unchanged, misprints correcte

Sensibilité de la sédimentation organique aux variations climatiques du Tardi-Wuerm et de l'Holocène; le lac du Bouchet (Haute-Loire, France)

Deux carottes de sédiments superficiels (2 à 3 m) prélevées dans le lac du Bouchet (Haute Loire, France) ont été étudiées du point de vue de leur composition minérale et organique. Les corrélations établies à partir des données concernant lamatière organique ainsi que celles de la palynologie, ont permis de replacer les deux premiers mètres de la série sédimentaire dans la logique climato-stratigraphique du passage Tardi-Würm-Holocène. Nous montrons ici que des variations climatiques de faible amplitude comme celles de l'Holocène, engendrent des changements importants dans la nature, la quantité et le mode de préservation des constituants organiques sédimentés