Low loss coatings for the VIRGO large mirrors

présentée par L. PinardThe goal of the VIRGO program is to build a giant Michelson type interferometer (3 kilometer long arms) to detect gravitational waves. Large optical components (350 mm in diameter), having extremely low loss at 1064 nm, are needed. Today, the Ion beam Sputtering is the only deposition technique able to produce optical components with such performances. Consequently, a large ion beam sputtering deposition system was built to coat large optics up to 700 mm in diameter. The performances of this coater are described in term of layer uniformity on large scale and optical losses (absorption and scattering characterization). The VIRGO interferometer needs six main mirrors. The first set was ready in June 2002 and its installation is in progress on the VIRGO site (Italy). The optical performances of this first set are discussed. The requirements at 1064 nm are all satisfied. Indeed, the absorption level is close to 1 ppm (part per million), the scattering is lower than 5 ppm and the R.M.S. wavefront of these optics is lower than 8 nm on 150 mm in diameter. Finally, some solutions are proposed to further improve these performances, especially the absorption level (lower than 0.1 ppm) and the mechanical quality factor Q of the mirrors (thermal noise reduction)

CMOS photodetection system with variable-time synchronous detection

International audienc

CMOS optical detector system for capillary fluorescence measurements

International audienc

Tetrafluorinated versus hydrogenated azobenzene polymers in water: Access to visible-ligh stimulus at the expense of responsiveness

International audienc

Detection of the amoeba Entamoeba gingivalis in periodontal pockets

Periodontitis is a public health issue, being one of the most prevalent diseases worldwide. However, the aetiology of the disease is still unclear: genetics of patients cannot explain the dispersed or isolated localisation of gingival pockets, while bacteria-based models are insufficient to distinguish gingivitis and periodontitis. The possible role of parasites in the establishment of periodontitis has been poorly studied until now. The aim of this project was to study a potential link between colonisation of gingival crevices by the amoeba Entamoeba gingivalis and periodontitis. In eight different dental clinics in France, samples were taken in periodontal pockets (72) or healthy sites (33), and submitted to microscopic observation and molecular identification by PCR with a new set of primers designed to specifically detect E. gingivalis. This blind sample analysis showed the strong sensitivity of PCR compared with clinical diagnosis (58/72 = 81%), and microscopy (51/65 = 78%). The results of this work show that the parasites detected by microscopy mainly – if not exclusively – belong to the species E. gingivalis and that the presence of the parasite is correlated with periodontitis

Detection of the amoeba

Periodontitis is a public health issue, being one of the most prevalent diseases worldwide. However, the aetiology of the disease is still unclear: genetics of patients cannot explain the dispersed or isolated localisation of gingival pockets, while bacteria-based models are insufficient to distinguish gingivitis and periodontitis. The possible role of parasites in the establishment of periodontitis has been poorly studied until now. The aim of this project was to study a potential link between colonisation of gingival crevices by the amoeba Entamoeba gingivalis and periodontitis. In eight different dental clinics in France, samples were taken in periodontal pockets (72) or healthy sites (33), and submitted to microscopic observation and molecular identification by PCR with a new set of primers designed to specifically detect E. gingivalis. This blind sample analysis showed the strong sensitivity of PCR compared with clinical diagnosis (58/72 = 81%), and microscopy (51/65 = 78%). The results of this work show that the parasites detected by microscopy mainly – if not exclusively – belong to the species E. gingivalis and that the presence of the parasite is correlated with periodontitis

Synthesis and Self-Assembly of UV-Cross-Linkable Amphiphilic Polyoxazoline Block Copolymers: Importance of Multitechnique Characterization

International audienceIn the nanomedicine field, there is a need to widen the availability of nanovectors to compensate for the increasingly reported side effects of poly(ethene glycol). Nanovectors enabling cross-linking can further optimize drug delivery. Cross-linkable polyoxazolines are therefore relevant candidates to address these two points. Here we present the synthesis of coumarin-functionalized poly(2-alkyl-2-oxazoline) block copolymers, namely, poly(2-methyl-2-oxazoline)-block-poly(2-phenyl-2-oxazoline) and poly(2-methyl-2-oxazoline)-block-poly(2-butyl-2-oxazoline). The hydrophilic ratio and molecular weights were varied in order to obtain a range of possible behaviors. Their self-assembly after nanoprecipitation or film rehydration was examined. The resulting nano-objects were fully characterized by transmission electron microscopy (TEM), cryo-TEM, multiple-angle dynamic and static light scattering. In most cases, the formation of polymer micelles was observed, as well as, in some cases, aggregates, which made characterization more difficult. Cross-linking was performed under UV illumination in the presence of a coumarin-bearing cross-linker based on polymethacrylate derivatives. Addition of the photo-cross-linker and cross-linking resulted in better-defined objects with improved stability in most cases

Synthesis and Self-Assembly of UV-Cross-Linkable Amphiphilic Polyoxazoline Block Copolymers: Importance of Multitechnique Characterization

International audienceIn the nanomedicine field, there is a need to widen the availability of nanovectors to compensate for the increasingly reported side effects of poly(ethene glycol). Nanovectors enabling cross-linking can further optimize drug delivery. Cross-linkable polyoxazolines are therefore relevant candidates to address these two points. Here we present the synthesis of coumarin-functionalized poly(2-alkyl-2-oxazoline) block copolymers, namely, poly(2-methyl-2-oxazoline)-block-poly(2-phenyl-2-oxazoline) and poly(2-methyl-2-oxazoline)-block-poly(2-butyl-2-oxazoline). The hydrophilic ratio and molecular weights were varied in order to obtain a range of possible behaviors. Their self-assembly after nanoprecipitation or film rehydration was examined. The resulting nano-objects were fully characterized by transmission electron microscopy (TEM), cryo-TEM, multiple-angle dynamic and static light scattering. In most cases, the formation of polymer micelles was observed, as well as, in some cases, aggregates, which made characterization more difficult. Cross-linking was performed under UV illumination in the presence of a coumarin-bearing cross-linker based on polymethacrylate derivatives. Addition of the photo-cross-linker and cross-linking resulted in better-defined objects with improved stability in most cases

PHARAO flight model : Integration and "on ground" performances tests

International audiencePHARAO (Projet d'Horloge Atomique par Refroidissement d'Atomes en Orbite), which is being developed by the French space agency CNES, is the first primary frequency standard specially designed for operation in space. PHARAO is the main instrument of the ESA mission ACES (Atomic Clock Ensemble in Space) [1]. ACES payload will be installed on-board the International Space Station to perform fundamental physics experiments. Last year [2], some results on two flight model (FM) sub-systems have been presented: Microwave Source performances and Cesium Tube operating as a cold atom clock by using the other engineering model sub-systems. All the FM sub-systems have now passed the qualification process and the whole FM of the cold cesium clock, PHARAO, has been assembled and will undergo extensive tests during the first semester of 2014. The results on the cold atoms manipulation and the metrological evaluation are presented