Demonstration of a quantum logic gate in a cryogenic surface-electrode ion trap

We demonstrate quantum control techniques for a single trapped ion in a cryogenic, surface-electrode trap. A narrow optical transition of Sr+ along with the ground and first excited motional states of the harmonic trapping potential form a two-qubit system. The optical qubit transition is susceptible to magnetic field fluctuations, which we stabilize with a simple and compact method using superconducting rings. Decoherence of the motional qubit is suppressed by the cryogenic environment. AC Stark shift correction is accomplished by controlling the laser phase in the pulse sequencer, eliminating the need for an additional laser. Quantum process tomography is implemented on atomic and motional states using conditional pulse sequences. With these techniques we demonstrate a Cirac-Zoller Controlled-NOT gate in a single ion with a mean fidelity of 91(1)%.Comment: 11 pages, 5 figures, 4 table

Cavity sideband cooling of a single trapped ion

We report a demonstration and quantitative characterization of one-dimensional cavity cooling of a single trapped 88Sr+ ion in the resolved sideband regime. We measure the spectrum of cavity transitions, the rates of cavity heating and cooling, and the steady-state cooling limit. The cavity cooling dynamics and cooling limit of 22.5(3) motional quanta, limited by the moderate coupling between the ion and the cavity, are consistent with a simple model [Phys. Rev. A 64, 033405] without any free parameters, validating the rate equation model for cavity cooling.Comment: 5 pages, 4 figure

Individual addressing of ions using magnetic field gradients in a surface-electrode ion trap

Dense array of ions in microfabricated traps represent one possible way to scale up ion trap quantum computing. The ability to address individual ions is an important component of such a scheme. We demonstrate individual addressing of trapped ions in a microfabricated surface-electrode trap using a magnetic field gradient generated on-chip. A frequency splitting of 310(2) kHz for two ions separated by 5 um is achieved. Selective single qubit operations are performed on one of two trapped ions with an average of 2.2+/-1.0% crosstalk. Coherence time as measured by the spin-echo technique is unaffected by the field gradient.Comment: 3 pages, 3 figures; submitted to AP

Superconducting microfabricated ion traps

We fabricate superconducting ion traps with niobium and niobium nitride and trap single 88Sr ions at cryogenic temperatures. The superconducting transition is verified and characterized by measuring the resistance and critical current using a 4-wire measurement on the trap structure, and observing change in the rf reflection. The lowest observed heating rate is 2.1(3) quanta/sec at 800 kHz at 6 K and shows no significant change across the superconducting transition, suggesting that anomalous heating is primarily caused by noise sources on the surface. This demonstration of superconducting ion traps opens up possibilities for integrating trapped ions and molecular ions with superconducting devices.Comment: 3 pages, 2 figure

Electron impact ionization loading of a surface electrode ion trap

We demonstrate a method for loading surface electrode ion traps by electron impact ionization. The method relies on the property of surface electrode geometries that the trap depth can be increased at the cost of more micromotion. By introducing a buffer gas, we can counteract the rf heating assocated with the micromotion and benefit from the larger trap depth. After an initial loading of the trap, standard compensation techniques can be used to cancel the stray fields resulting from charged dielectric and allow for the loading of the trap at ultra-high vacuum.Comment: 4 pages, 5 eps figures. Shift in focus, minor correction

Suppression of Heating Rates in Cryogenic Surface-Electrode Ion Traps

Dense arrays of trapped ions provide one way of scaling up ion trap quantum information processing. However, miniaturization of ion traps is currently limited by sharply increasing motional state decoherence at sub-100 um ion-electrode distances. We characterize heating rates in cryogenically cooled surface-electrode traps, with characteristic sizes in 75 um to 150 um range. Upon cooling to 6 K, the measured rates are suppressed by 7 orders of magnitude, two orders of magnitude below previously published data of similarly sized traps operated at room temperature. The observed noise depends strongly on fabrication process, which suggests further improvements are possible.Comment: 4 pages, 4 figure

Temperature Dependence of Electric Field Noise Above Gold Surfaces

Electric field noise from fluctuating patch potentials is a significant problem for a broad range of precision experiments, including trapped ion quantum computation and single spin detection. Recent results demonstrated strong suppression of this noise by cryogenic cooling, suggesting an underlying thermal process. We present measurements characterizing the temperature and frequency dependence of the noise from 7 to 100 K, using a single Sr+ ion trapped 75 um above the surface of a gold plated surface electrode ion trap. The noise amplitude is observed to have an approximate 1/f spectrum around 1 MHz, and grows rapidly with temperature as T^beta for beta from 2 to 4. The data are consistent with microfabricated cantilever measurements of non-contact friction but do not extrapolate to the DC measurements with neutral atoms or contact potential probes.Comment: 4 pages, 3 figures, 1 tabl

Laser ablation loading of a surface-electrode ion trap

We demonstrate loading by laser ablation of $^{88}$Sr$^+$ ions into a mm-scale surface-electrode ion trap. The laser used for ablation is a pulsed, frequency-tripled Nd:YAG with pulse energies of 1-10 mJ and durations of 3-5 ns. An additional laser is not required to photoionize the ablated material. The efficiency and lifetime of several candidate materials for the laser ablation target are characterized by measuring the trapped ion fluorescence signal for a number of consecutive loads. Additionally, laser ablation is used to load traps with a trap depth (40 meV) below where electron impact ionization loading is typically successful ($\gtrsim$ 500 meV).Comment: 4 pages, 4 figure

Demonstration of a Scalable, Multiplexed Ion Trap for Quantum Information Processing

Author's final manuscript: July 9, 2009A scalable, multiplexed ion trap for quantum information processing is fabricated and tested. The trap design and fabrication process are optimized for scalability to small trap size and large numbers of interconnected traps, and for integration of control electronics and optics. Multiple traps with similar designs are tested with [superscript 111]Cd[superscript +], [superscript 25]Mg[superscript +], and [superscript 88]Sr[superscript +] ions at room temperature and with [superscript 88]Sr[superscript +] at 6 K, with respective ion lifetimes of 90 s, 300 ± 30 s, 56 ± 6 s, and 4.5 ± 1.1 hours. The motional heating rate for [superscript 25]Mg[superscript +] at room temperature and a trap frequency of 1.6 MHz is measured to be 7 ± 3 quanta per millisecond. For [superscript 88]Sr[superscript +] at 6 K and 540 kHz the heating rate is measured to be 220 ± 30 quanta per second.United States. Intelligence Advanced Research Projects ActivityNational Institute of Standards and Technology (U.S.) (Quantum Information Program