Activated flux tig welding of stainless-steel pipes

In this work, the presence of TiO2 nanoparticle-based activated flux combined with orbital welding of seamless thick-walled pipes of stainless steel and low-cycle pulse current was done, representing a novel combination of welding processes parameters. Control specimens were welded without flux and consumable material, and without flux with the consumable material. Experimental welding with different welding parameters was done. Special attention was given to characterize the flux by zetasizer method, representing a new approach, versus the conventional approach where the nominal oxide particle size is reported. The obtained welds were visually tested, macroanalyzed, their microstructures examined, and their tensile and bending properties determined. The results show that the flux influences a significant increase in penetration depth, up to full penetration, which has a positive effect on the increase in the tensile and bending properties of the weld metal. Material beahvior model was developed, based on microstructural features of the near weld-line. Without the flux, grain enlargement occurred near the surface, while with flux, it occurred under the weld, which can be attributed to recrystallization and a reversed Marangoni convection

Ballistic Behaviour of Austempered Compacted Graphite Iron Perforated Plates

In this study, the performance of austempered compacted graphite iron was evaluated to find its suitability as perforated plates used in add-on armour. Perforated compacted graphite plates were subjected to austenitisation at 900 degrees C for 2 h followed by austempering at 275 and 400 degrees C for 1 h. The basic plate was fixed at 400 mm away from the perforated plate and armour and then piercing incendiary projectile was shot from a distance of 100 m. It was observed that both 7 mm and 9 mm perforated plates austempered at lower temperature of 275 degrees C producing higher hardness and lower ductility were effective in fracturing the penetrating core, thereby significantly decreasing the chances of penetrating the basic plate

Ballistic Behaviour of Austempered Compacted Graphite Iron Perforated Plates

In this study, the performance of austempered compacted graphite iron was evaluated to find its suitability as perforated plates used in add-on armour. Perforated compacted graphite plates were subjected to austenitisation at 900 °C for 2 h followed by austempering at 275 and 400 °C for 1 h. The basic plate was fixed at 400 mm away from the perforated plate and armour and then piercing incendiary projectile was shot from a distance of 100 m. It was observed that both 7 mm and 9 mm perforated plates austempered at lower temperature of 275 °C producing higher hardness and lower ductility were effective in fracturing the penetrating core, thereby significantly decreasing the chances of penetrating the basic plate

Benzodiazepine prescription in relation to psychiatric diagnosis and patient characteristics: A pilot study

Introduction: Benzodiazepines are widely used drugs which are often misused. Analysis of psychotropic drugs prescription in Serbia showed high prescription rate of benzodiazepines in the psychiatric patient population, with an increasing trend. Potential association between psychiatric diagnostic categories (organic brain syndrome, psychotic disorders, bipolar disorder, unipolar depression, anxiety disorder, personality disorder), or the sociodemographic characteristics of patients (gender, age, education, marital state) and benzodiazepine prescribing practice was not thoroughly tested. Aim: By analyzing routine practice of the university clinic, the aim of this study was to examine whether there is an association between clinical or socio-demographic characteristics of the patients and benzodiazepine prescribing practice. Material and methods: This study was carried out by retrospective analysis of the patient's medical charts after hospital discharge (n=102). Data analysis included descriptive statistics, testing the difference between groups and correlation analysis. Results: At the discharge, 94.1% of patients had benzodiazepines prescribed, with an average dose of 4.6 ± 3.2mg lorazepam dose equivalents. It is shown that female patients were prescribed with higher doses of benzodiazepines than male patients (p=0.018), that the average dose was higher for patients treated with an overall larger number of psychiatric drugs (p = 0.013), as well as that hospital inpatients had higher doses compared to day hospital-treated patients (p = 0.011). Patients with a diagnosis of personality disorder had a slight upward trend of benzodiazepine dose (p=0.078). Conclusion: Current research provided a clear insight into the actual practice of benzodiazepine prescription at local university center. Similarly to our region, indications for prescribing benzodiazepines appear to be quite broad and not specific enough worldwide. This is why it is important to carefully reconsider benzodiazepine prescribing practices and to prevent potential consequences. Moreover, it is necessary to carry out a comparative analysis among similar institutions within the country and in the region