1,186 research outputs found

    Preparation of metallic target of 100Mo for production of 99mTc in cyclotron

    Get PDF
    Introduction Technetium-99m, the daughter of 99Mo is the most commonly used radioisotope in nuclear medicine [1–2]. Current global crisis of 99Mo supply, aging of nuclear reactors and staggering costs force the search for alternative sources of 99mTc. Radioisotope Centre POLATOM joined the IAEA Coordinated Research Project on “Accelerator-based Alternatives to Non-HEU Production of 99Mo/99mTc”. The planned outcome of this project is development of 99mTc production method using the reaction of 100Mo(p,2n)99mTc [3] in Polish cyclotron. This work presents the results concerning preparation of 100Mo target for irradiation with protons. Material and Methods The manufacturing of Mo target was performed using pressing of molybdenum powder into pellets and its sintering in hydrogen atmosphere at 1600 oC [4]. For this purpose a tantalum and stainless steel plates were used as support. Several pellets using molybdenum powder with particles size of 2 µm in diameter were pressed at different values of pressure. Results and Conclusion The optimized parameters of pressing molyb-denum pellets with various sizes are given in TABLE 1. It was found that the pellets did not adhere neither to the tantalum nor stainless steel plates but they conducted electricity very well. Pellets prepared with higher pressure were more mechanically resistant, however application, even the highest used pressure did not ensure its satisfactory stability. In order to improve mechanical strength, pressed Mo pellets were sintered in hydrogen atmosphere at temperature of 1600 °C. As a result of this process dimensions of Mo pellets decreased: diameter by 13 %, thickness by 12 %, weight by 1.5 %, volume by 34 % while density increased by 50 %. The changes of these parameters are associated with reduction of molybdenum oxide and removal of oxygen from intermetallic space. It was confirmed by photos of microscopic cross section of pellets before and after sintering. It was observed, that after sintering Mo pellets got a metallic form with very high hardness and mechanical strength

    EFFECT OF LOW DOSES OF LOW-LET RADIATION ON THE INNATE ANTITUMOR REACTIONS IN RADIORESISTANT AND RADIOSENSITIVE MICE

    Get PDF
    BALB/c and C57BL/6 mice differ in their Th1/Th2 lymphocyte and M1/M2 macrophage phenotypes, radiosensitivity, and post-irradiation tumor incidence. In this study we evaluated the effects of repeated low-level exposures to X-rays on the development of artificial tumor colonies in the lungs of animals from the two strains and cytotoxic activities of natural killer (NK) cells and macrophages obtained from these mice. After ten daily irradiations of BALB/c or C57BL/6 mice with 0.01, 0.02, and 0.1 Gy X-rays NK cell-enriched splenocytes collected from the animals demonstrated significant and comparable up-regulation of their anti-tumor cytotoxic function. Likewise, peritoneal macrophages collected from the two irradiated strains of mice exhibited the similarly stimulated cytotoxicities against susceptible tumor cells and produced significantly more nitric oxide. These results were accompanied by the significantly reduced numbers of the neoplastic colonies induced in the lungs by intravenous injection of syngeneic tumor cells. The obtained results indicate that ten low-level irradiations with X-rays stimulate the generally similar anti-tumor reactions in BALB/c and C57BL/6 mice

    Iron, zinc, copper, manganese and chromium in green teas, their transfer to extracts and correlations between contents of elements and bioactive compounds

    Get PDF
    Green tea is used worldwide in the preparation of beverages, but also its extracts rich in bioactive compounds, especially flavan-3-ols, are of increasing interest. In addition to bioactive molecules, green tea represents a source of dietary elements. However, knowledge about their content in extracts is limited. The aim of our research was to determine the extent of transfer of selected elements, i.e., iron (Fe), zinc (Zn), copper (Cu), manganese (Mn), and chromium (Cr), from green teas to their extracts and to investigate whether the main bioactive compounds of the extracts affect this transfer. Twelve commercially available green teas were used in the study. The contents of elements in green teas and their extracts obtained with 80% acetone (v/v) were analysed by inductively coupled plasma optical emission spectroscopy (ICP-OES). High performance liquid chromatography in reverse phase (RP-HPLC) was used to determine contents of caffeine, (–)-epigallocatechin (EGC), (–)-epicatechin (EP), (–)-epigallocatechin gallate (EGCG), and (–)-epicatechin gallate (ECG). The element with the highest content in green teas was Mn (711–1402 µg/g), but its transfer to extracts was the lowest (0.269–0.646%). The mean Fe transfer, second abundant element in teas (115–725 µg/g), was 5.52%. The contents of Mn and Fe in extracts were 5.08–30.2 and 10.7–90.1 µg/g, respectively. Zn, Cu, and Cr were transferred with means of 10.4, 20.0, and 26.2%, respectively, which resulted in their contents in the extracts in the ranges of 5.03–12.6, 1.93–13.8, and 0.128–2.03 µg/g, respectively. The significant positive correlations of Zn content in extracts and/or transfer to extracts with EGCG, EGC and total flavan-3-ols as well as between the same Fe variables and EGC were determined, which suggested that these flavan-3-ols may positively affect the transfer of Fe and Zn from green tea to extracts. In turn, significant but negative correlations were found in the case of Mn and Cu. Future research is needed to identify the causes of the various transfer rate of elements from green teas to extracts

    Fast divide-and-conquer algorithms for preemptive scheduling problems with controllable processing times – A polymatroid optimization approach

    Get PDF
    We consider a variety of preemptive scheduling problems with controllable processing times on a single machine and on identical/uniform parallel machines, where the objective is to minimize the total compression cost. In this paper, we propose fast divide-and-conquer algorithms for these scheduling problems. Our approach is based on the observation that each scheduling problem we discuss can be formulated as a polymatroid optimization problem. We develop a novel divide-and-conquer technique for the polymatroid optimization problem and then apply it to each scheduling problem. We show that each scheduling problem can be solved in O(Tfeas(n) log n) time by using our divide-and-conquer technique, where n is the number of jobs and Tfeas(n) denotes the time complexity of the corresponding feasible scheduling problem with n jobs. This approach yields faster algorithms for most of the scheduling problems discussed in this paper

    Antioxidant potential of kvasses

    Get PDF
    This study was aimed at determination of antioxidant capacity of commercial kvasses. Four different beverages (“Obolon”, “Wileński”, “Gubernija”, and Eko-Natura”) were purchased in local shops in Poland, one beverage (“Brottrunk Biovegan”) originated from the German market. Antioxidan capacity of the beverages was investigated using ABTS, FRAP, and DPPH assays. The content of total phenolic compounds was determined using a FolinCiocalteu’s phenol reagent. The profile of phenolic compounds were determined using an HPLC method. The content of total phenolics ranged from 0.083 to 0.372 mg/ml; the TEAC values from 0.133 to 1.001 μmol Trolox/ml; the FRAP values from 0.893 to 3.079 μmol Fe2+/ml. The antiradical activity against DPPH radical ranged from 0.097 to 0.463 μmol Trolox/ml. A strong correlation was noted between the contents of total phenolics and results of antioxidant assays. The presence of benzoic acid in one beverage was confirmed using the HPLC method
    corecore