A model for mark size dependence on field emission voltage in heat-assisted magnetic probe recording on CoNi/Pt multilayers

A method of heat-assisted magnetic recording (HAMR) potentially suitable for probe-based storage systems is characterized. In this work, field emission current from a scanning tunneling microscope (STM) tip is used as the heating source. Pulse voltages of 2-7 V with a duration of 500 ns were applied to a CoNi/Pt multilayered film. Different types of Ir/Pt and W STM tips were used in the experiment. The results show that thermally recorded magnetic marks are formed with a nearly uniform mark size of 170 nm when the pulse voltage is above a threshold voltage. The threshold voltage depends on the material work function of the tip, with W having a threshold voltage about 1 V lower than Pt. The emission area of our tip-sample system derived from an analytic expression for field emission current is approximately equal to the mark size, and is largely independent of pulse voltage. This emission area is large compared to lateral heat diffusion in the film. Thus higher applied voltages lead to higher peak temperatures in the model of the write process, but the mark diameter remains relatively unchanged

The role of MFM signal in mark size measurement in probe-based magnetic recording on CoNi/Pt multilayers

A method of heat-assisted magnetic recording (HAMR) potentially suitable for probe-based storage systems is characterized. Magnetic marks were formed by a scanning tunneling microscopy (STM)-based thermal magnetic mechanism on a perpendicular CoNi/Pt multilayered film. Magnetic force microscopy (MFM) was applied to display those marks. The MFM signal is dependent of the lift-height during MFM scanning: smaller lift-height leads to higher resolution of the MFM image and a double-peak signal line, while higher lift-height leads to lower resolution and a single-peak signal line. Theoretical calculation of the magnetic field from the mark was executed. It agrees well with experiments, and demonstrates the method of mark size measurement in perpendicular media: full-width half-maximum (FWHM) of the measured MFM signal. \ud \u

The effect of external magnetic field on mark size during field emission assisted magnetic probe recording on CoNi/Pt multilayers

In this work, we characterize a heat-assisted magnetic recording process potentially suitable for proposed probe-based storage systems. A scanning tunneling microscope (STM) is used to locally heat a uniformly magnetized perpendicular recording medium via field emission current. The recording medium is a 30 nm thick CoNi/Pt multilayer film (H/sub C/ = 100 kA/m [1.2 kOe], M/sub S/ = 360 kA/m) with a 23 nm thick Pt seedlayer, fabricated on a bare Si substrate. Voltage pulses were applied between STM tip (made of Ir/Pt) and the medium to write marks with external magnetic field applied. A magnetic force microscope (MFM) is used to image marks. Mark size was measured as the FWHM of MFM phase signal. Experimental results show that mark size increases with increasing positive field and decreases with increasing negative field. A model is quantitatively simulate our experimental results and we are able to predict tip and medium configurations and applied powers that should permit marks appropriate for recording at 1 Tbit/in/sup 2/ and beyond

Dynamic domain motion of thermal-magnetically formed marks on CoNi/Pt multilayers

We characterized a method of heat-assisted magnetic recording, which is potentially suitable for probe-based storage systems. The field emission current from a scanning tunneling microscope tip was used as the heating source. Various pulse voltages were applied to two types of CoNi/Pt multilayered films: one is strongly coupled with low coercivity, and the other is weakly coupled with high coercivity. Experimental results show that marks achieved in strongly coupled medium are larger than that in granular one. An external magnetic field was then applied to those marks. For weak fields (lower than the coercivity of the medium) the size of marks changes distinctly in the strongly coupled medium but not in the granular one. A model of magnetic domain dynamics is built to quantitatively explain the experimental results. It agrees with experiments. Based on this model, we will be able to figure out the proposals to achieve small marks for ultrahigh recording density. © 2006 American Institute of Physics.\ud \u

Myths and Methodologies:Standardisation in human physiology research—should we control the controllables?

The premise of research in human physiology is to explore a multifaceted system whilst identifying one or a few outcomes of interest. Therefore, the control of potentially confounding variables requires careful thought regarding the extent of control and complexity of standardisation. One common factor to control prior to testing is diet, as food and fluid provision may deviate from participants’ habitual diets, yet a self‐report and replication method can be flawed by under‐reporting. Researchers may also need to consider standardisation of physical activity, whether it be through familiarisation trials, wash‐out periods, or guidance on levels of physical activity to be achieved before trials. In terms of pharmacological agents, the ethical implications of standardisation require researchers to carefully consider how medications, caffeine consumption and oral contraceptive prescriptions may affect the study. For research in females, it should be considered whether standardisation between‐ or within‐participants in regards to menstrual cycle phase is most relevant. The timing of measurements relative to various other daily events is relevant to all physiological research and so it can be important to standardise when measurements are made. This review summarises the areas of standardisation which we hope will be considered useful to anyone involved in human physiology research, including when and how one can apply standardisation to various contexts

Effect of 17 Days of Bed Rest on Peak Isometric Force and Unloaded Shortening Velocity of Human Soleus Fibers

The purpose of this study was to examine the effect of prolonged bed rest (BR) on the peak isometric force (Po) and unloaded shortening velocity (Vo) of single Ca2+-activated muscle fibers. Soleus muscle biopsies were obtained from eight adult males before and after 17 days of 6° head-down BR. Chemically permeabilized single fiber segments were mounted between a force transducer and position motor, activated with saturating levels of Ca2+, and subjected to slack length steps. Vo was determined by plotting the time for force redevelopment vs. the slack step distance. Gel electrophoresis revealed that 96% of the pre- and 87% of the post-BR fibers studied expressed only the slow type I myosin heavy chain isoform. Fibers with diameter \u3e100 μm made up only 14% of this post-BR type I population compared with 33% of the pre-BR type I population. Consequently, the post-BR type I fibers (n = 147) were, on average, 5% smaller in diameter than the pre-BR type I fibers (n = 218) and produced 13% less absolute Po. BR had no overall effect on Po per fiber cross-sectional area (Po/CSA), even though half of the subjects displayed a decline of 9–12% in Po/CSA after BR. Type I fiber Vo increased by an average of 34% with BR. Although the ratio of myosin light chain 3 to myosin light chain 2 also rose with BR, there was no correlation between this ratio and Vo for either the pre- or post-BR fibers. In separate fibers obtained from the original biopsies, quantitative electron microscopy revealed a 20–24% decrease in thin filament density, with no change in thick filament density. These results raise the possibility that alterations in the geometric relationships between thin and thick filaments may be at least partially responsible for the elevated Vo of the post-BR type I fibers

On Horizons and Plane Waves

We investigate the possibility of having an event horizon within several classes of metrics that asymptote to the maximally supersymmetric IIB plane wave. We show that the presence of a null Killing vector (not necessarily covariantly constant) implies an effective separation of the Einstein equations into a standard and a wave component. This feature may be used to generate new supergravity solutions asymptotic to the maximally supersymmetric IIB plane wave, starting from standard seed solutions such as branes or intersecting branes in flat space. We find that in many cases it is possible to preserve the extremal horizon of the seed solution. On the other hand, non-extremal deformations of the plane wave solution result in naked singularities. More generally, we prove a no-go theorem against the existence of horizons for backgrounds with a null Killing vector and which contain at most null matter fields. Further attempts at turning on a nonzero Hawking temperature by introducing additional matter have proven unsuccessful. This suggests that one must remove the null Killing vector in order to obtain a horizon. We provide a perturbative argument indicating that this is in fact possible.Comment: 46 pp, 1 figur

The Place and Value of Sodium-Glucose Cotransporter 2 Inhibitors in the Evolving Treatment Paradigm for Type 2 Diabetes Mellitus: A Narrative Review

Over recent years, the expanding evidence base for sodium-glucose cotransporter-2 inhibitor (SGLT2i) therapies has revealed benefits beyond their glucose-lowering efficacy in the treatment of Type 2 diabetes mellitus (T2DM), resulting in their recognition as cardiorenal medicines. While SGLT2is continue to be recommended among the second-line therapies for the treatment of hyperglycaemia, their true value now extends to the prevention of debilitating and costly cardiovascular and renal events for high-risk individuals, with particular benefit shown in reducing major adverse cardiac events and heart failure (HF) and slowing the progression of chronic kidney disease. However, SGLT2i usage is still suboptimal among groups considered to be at greatest risk of cardiorenal complications. The ongoing coronavirus disease 2019 (COVID-19) pandemic has intensified financial pressures on healthcare systems, which may hamper further investment in newer effective medicines. Emerging evidence indicates that glycaemic control should be prioritised for people with T2DM in the era of COVID-19 and practical advice on the use of T2DM medications during periods of acute illness remains important, particularly for healthcare professionals working in primary care who face multiple competing priorities. This article provides the latest update from the Improving Diabetes Steering Committee, including perspectives on the value of SGLT2is as cost-effective therapies within the T2DM treatment paradigm, with particular focus on the latest published evidence relating to the prevention or slowing of cardiorenal complications. The implications for ongoing and future approaches to diabetes care are considered in the light of the continuing coronavirus pandemic, and relevant aspects of international treatment guidelines are highlighted with practical advice on the appropriate use of SGLT2is in commonly occurring T2DM clinical scenarios. The ‘SGLT2i Prescribing Tool for T2DM Management’, previously published by the Steering Committee, has been updated to reflect the latest evidence and is provided in the Supplementary Materials to help support clinicians delivering T2DM care