Developments in CO2 research

CO2 can be a good solvent for many compounds when used in its compressed liq- uid or supercritical fluid state. Above its critical temperature and critical pressure (Tc = 31 °C, Pc = 73.8 bar), CO2 has liquid-like densities and gas-like viscosities, which allows for safe commercial and laboratory operating conditions. Many small molecules are readily soluble in CO2, whereas most macromolecules are not. This has prompted development of several classes of small molecule and polymeric surfactants that enable emulsion and dispersion polymerizations as well as other technological processes

Demulsification mechanism of asphaltene-stabilized water-in-oil emulsions by a polymeric ethylene oxide-propylene oxide demulsifier

The demulsification mechanism of asphaltene-stabilized water-in-toluene emulsions by an ethylene-oxide-propylene oxide (EO-PO) based polymeric demulsifier was studied. Demulsification efficiency was determined by bottle tests and correlated to the physicochemical properties of asphaltene interfacial films after demulsifier addition. From bottle tests and droplet coalescence experiments, the demulsifier showed an optimal performance at 2.3 ppm (mass basis) in toluene. At high concentrations, the demulsification performance deteriorated due to the intrinsic stabilizing capacity of the demulsifier, which was attributed to steric repulsion between water droplets. Addition of demulsifier was shown to soften the asphaltene film (i.e., reduce the viscoelastic moduli of asphaltene films) under both shear and compressional interfacial deformations. Study of the macrostructures and the chemical composition of asphaltene film at the toluene-water interface after demulsifier addition demonstrated gradual penetration of the demulsifier into the asphaltene film. Demulsifier penetration in the asphaltene film changed the asphaltene interfacial mobility and morphology, as probed with Brewster angle and atomic force microscopy