5 research outputs found

    Parallel Imaging of Thickness Variations and Disbonding of Thermal Barrier Coatings by Time-Resolved Infrared Radiometry (TRIR)

    Get PDF
    Pulsed photothermal radiometry has been shown to be a useful thermally-based nondestructive evaluation technique for various thin films and layered specimens [1,2]. In this method the time development of the surface temperature is studied for both heating and cooling, during and after the application of a step heating pulse of duration, T. In this paper, we show that the method gives quantitative information about layered materials including measurement of coating thickness and the detection and characterization of disbonding between layers. Since all times are monitored, it is not necessary to know the thickness of the coating provided the heating pulse is set longer than the thermal transit time of the coating. As a result, both coating thickness and the integrity of the coating-substrate bond can be determined simultaneously

    Precise Thermal NDE for Quantifying Structural Damage

    Get PDF
    We have developed precise thermal NDE as a wide-area inspection tool to quantify structural damage within airframes and bridge decks. We used infrared cameras and image processing to produce precise temperature, thermal inertia, and cooling-rate maps of flash-heated aircraft skins. These maps allowed us to distinguish major structural defects from minor flaws which do not warrant costly repairs. We quantified aircraft skin corrosion defects with metal losses as low as 5% with 3% overall uncertainty [1–6]. We proved the feasibility of precise thermal NDE to inspect naturally-heated asphalt-concrete bridge decks. To this end, we quantified structural damage within asphalt-concrete slabs by locating the sites, and determining the relative volumes, of concrete displacements from 2-inch deep and 4-inch deep synthetic delaminations in asphalt-concrete slabs [4–8]

    Age effects on osteoclasts in retention after orthodontic tooth movement

    Get PDF
    Electronic shearographic interferometry is a nondestructive evaluation (NDE) technique in which qualitative detection of subsurface defects is readily achieved. In both industrial and laboratory environments, various full field stressing methods, including vibration, vacuum, thermal and mechanical loading, have been employed to produce characteristic deformations which can be monitored shearographically [1,2]. However, quantitative measurements of parameters such as defect depth are difficult to make with these techniques. This paper presents the results of using controlled thermal stressing with shearography in an effort to expand the quantitative capabilities of the technique. The use of controlled thermal-stressing allows a totally noncontact inspection technique with a large standoff distance to monitor the time-dependent deformations of test specimens. Typically laser power levels of tens of milliWatts are sufficient to generate measurable deformations
    corecore