Detection of a Fourth Orbivirus Non-Structural Protein

The genus Orbivirus includes both insect and tick-borne viruses. The orbivirus genome, composed of 10 segments of dsRNA, encodes 7 structural proteins (VP1–VP7) and 3 non-structural proteins (NS1–NS3). An open reading frame (ORF) that spans almost the entire length of genome segment-9 (Seg-9) encodes VP6 (the viral helicase). However, bioinformatic analysis recently identified an overlapping ORF (ORFX) in Seg-9. We show that ORFX encodes a new non-structural protein, identified here as NS4. Western blotting and confocal fluorescence microscopy, using antibodies raised against recombinant NS4 from Bluetongue virus (BTV, which is insect-borne), or Great Island virus (GIV, which is tick-borne), demonstrate that these proteins are synthesised in BTV or GIV infected mammalian cells, respectively. BTV NS4 is also expressed in Culicoides insect cells. NS4 forms aggregates throughout the cytoplasm as well as in the nucleus, consistent with identification of nuclear localisation signals within the NS4 sequence. Bioinformatic analyses indicate that NS4 contains coiled-coils, is related to proteins that bind nucleic acids, or are associated with membranes and shows similarities to nucleolar protein UTP20 (a processome subunit). Recombinant NS4 of GIV protects dsRNA from degradation by endoribonucleases of the RNAse III family, indicating that it interacts with dsRNA. However, BTV NS4, which is only half the putative size of the GIV NS4, did not protect dsRNA from RNAse III cleavage. NS4 of both GIV and BTV protect DNA from degradation by DNAse. NS4 was found to associate with lipid droplets in cells infected with BTV or GIV or transfected with a plasmid expressing NS4

Evolution and Phylogenetic Analysis of Full-Length VP3 Genes of Eastern Mediterranean Bluetongue Virus Isolates

Bluetongue virus (BTV) is the ‘type’ species of the genus Orbivirus within the family Reoviridae. The BTV genome is composed of ten linear segments of double-stranded RNA (dsRNA), each of which codes for one of ten distinct viral proteins. Previous phylogenetic comparisons have evaluated variations in genome segment 3 (Seg-3) nucleotide sequence as way to identify the geographical origin (different topotypes) of BTV isolates. The full-length nucleotide sequence of genome Seg-3 was determined for thirty BTV isolates recovered in the eastern Mediterranean region, the Balkans and other geographic areas (Spain, India, Malaysia and Africa). These data were compared, based on molecular variability, positive-selection-analysis and maximum-likelihood phylogenetic reconstructions (using appropriate substitution models) to 24 previously published sequences, revealing their evolutionary relationships. These analyses indicate that negative selection is a major force in the evolution of BTV, restricting nucleotide variability, reducing the evolutionary rate of Seg-3 and potentially of other regions of the BTV genome. Phylogenetic analysis of the BTV-4 strains isolated over a relatively long time interval (1979–2000), in a single geographic area (Greece), showed a low level of nucleotide diversity, indicating that the virus can circulate almost unchanged for many years. These analyses also show that the recent incursions into south-eastern Europe were caused by BTV strains belonging to two different major-lineages: representing an ‘eastern’ (BTV-9, -16 and -1) and a ‘western’ (BTV-4) group/topotype. Epidemiological and phylogenetic analyses indicate that these viruses originated from a geographic area to the east and southeast of Greece (including Cyprus and the Middle East), which appears to represent an important ecological niche for the virus that is likely to represent a continuing source of future BTV incursions into Europe

Nearest-cell: A fast and easy tool for locating crystal matches in the PDB

When embarking upon X-ray diffraction data collection from a potentially novel macromolecular crystal form, it can be useful to ascertain whether the measured data reflect a crystal form that is already recorded in the Protein Data Bank and, if so, whether it is part of a large family of related structures. Providing such information to crystallographers conveniently and quickly, as soon as the first images have been recorded and the unit cell characterized at an X-ray beamline, has the potential to save time and effort as well as pointing to possible search models for molecular replacement. Given an input unit cell, and optionally a space group, Nearest-cell rapidly scans the Protein Data Bank and retrieves near-matches.© 2012 International Union of Crystallography Printed in Singapore - all rights reserved

Recent advances in the production of proteins in insect and mammalian cells for structural biology.

The production of proteins in sufficient quantity and of appropriate quality is an essential pre-requisite for structural studies. Escherichia coli remains the dominant expression system in structural biology with nearly 90% of the structures in the Protein Data Bank (PDB) derived from proteins produced in this bacterial host. However, many mammalian and eukaryotic viral proteins require post-translation modification for proper folding and/or are part of large multimeric complexes. Therefore expression in higher eukaryotic cell lines from both invertebrate and vertebrate is required to produce these proteins. Although these systems are generally more time-consuming and expensive to use than bacteria, there have been improvements in technology that have streamlined the processes involved. For example, the use of multi-host vectors, i.e., containing promoters for not only E. coli but also mammalian and baculovirus expression in insect cells, enables target genes to be evaluated in both bacterial and higher eukaryotic hosts from a single vector. Culturing cells in micro-plate format allows screening of large numbers of vectors in parallel and is amenable to automation. The development of large-scale transient expression in mammalian cells offers a way of rapidly producing proteins with relatively high throughput. Strategies for selenomethionine-labelling (important for obtaining phase information in crystallography) and controlling glycosylation (important for reducing the chemical heterogeneity of glycoproteins) have also been reported for higher eukaryotic cell expression systems

Application of In-Fusion™ cloning for the parallel construction of E. coli expression vectors

In-Fusion™ cloning is a fl exible DNA ligase-independent cloning technology that has wide-ranging uses in molecular biology. In this chapter we describe the protocols used in the OPPF-UK to design and construct expression vectors using In-Fusion™. Our method for small scale expression screening in Escherichia coli of constructs generated by In-Fusion™ is also outlined. © Springer Science+Business Media New York 2014

The highly ordered double-stranded RNA genome of bluetongue virus revealed by crystallography.

The concentration of double-stranded RNA within the bluetongue virus core renders the genome segments liquid crystalline. Powder diffraction rings confirm this local ordering with a 30 A separation between strands. Determination of the structure of the bluetongue virus core serotype 10 and comparison with that of serotype 1 reveals most of the genomic double-stranded RNA, packaged as well-ordered layers surrounding putative transcription complexes at the apices of the particle. The outer layer of RNA is sufficiently well ordered by interaction with the capsid that a model can be built and extended to the less-ordered inner layers, providing a structural framework for understanding the mechanism of this complex transcriptional machine. We show that the genome segments maintain local order during transcription

Membrane structure and interactions with protein and DNA in bacteriophage PRD1.

Membranes are essential for selectively controlling the passage of molecules in and out of cells and mediating the response of cells to their environment. Biological membranes and their associated proteins present considerable difficulties for structural analysis. Although enveloped viruses have been imaged at about 9 A resolution by cryo-electron microscopy and image reconstruction, no detailed crystallographic structure of a membrane system has been described. The structure of the bacteriophage PRD1 particle, determined by X-ray crystallography at about 4 A resolution, allows the first detailed analysis of a membrane-containing virus. The architecture of the viral capsid and its implications for virus assembly are presented in the accompanying paper. Here we show that the electron density also reveals the icosahedral lipid bilayer, beneath the protein capsid, enveloping the viral DNA. The viral membrane contains about 26,000 lipid molecules asymmetrically distributed between the membrane leaflets. The inner leaflet is composed predominantly of zwitterionic phosphatidylethanolamine molecules, facilitating a very close interaction with the viral DNA, which we estimate to be packaged to a pressure of about 45 atm, factors that are likely to be important during membrane-mediated DNA translocation into the host cell. In contrast, the outer leaflet is enriched in phosphatidylglycerol and cardiolipin, which show a marked lateral segregation within the icosahedral asymmetric unit. In addition, the lipid headgroups show a surprising degree of order

The atomic structure of bluetongue virus core

The structure of the core of bluetongue virus has been determined at 3.5 resolution, revealing molecular details of mismatched symmetry. This is the largest structure yet determined by X-ray crystallography

Diffraction quality crystals of PRD1, a 66-MDa dsDNA virus with an internal membrane.

It has proved difficult to obtain well diffracting single crystals of macromolecular complexes rich in lipid. We report here the path that has led to crystals of the bacteriophage PRD1, a particle containing approximately 2,000 protein subunits from 18 different protein species, around 10 of which are integral membrane proteins associated with a host-derived lipid bilayer of some 12,500 lipid molecules. These crystals are capable of diffracting X-rays to Bragg spacings below 4A. It is hoped that some lessons learned from PRD1 will be applicable to other lipidic systems and that these crystals will allow, as a proof of principle, the determination of the structure of the virus in terms of a detailed atomic model

Insights into assembly from structural analysis of bacteriophage PRD1.

The structure of the membrane-containing bacteriophage PRD1 has been determined by X-ray crystallography at about 4 A resolution. Here we describe the structure and location of proteins P3, P16, P30 and P31. Different structural proteins seem to have specialist roles in controlling virus assembly. The linearly extended P30 appears to nucleate the formation of the icosahedral facets (composed of trimers of the major capsid protein, P3) and acts as a molecular tape-measure, defining the size of the virus and cementing the facets together. Pentamers of P31 form the vertex base, interlocking with subunits of P3 and interacting with the membrane protein P16. The architectural similarities with adenovirus and one of the largest known virus particles PBCV-1 support the notion that the mechanism of assembly of PRD1 is scaleable and applies across the major viral lineage formed by these viruses