Titanium dichloro, bis(carbyl), aryne, and alkylidene complexes stabilized by linked cyclopentadienyl-amido auxiliary ligands

Thermal decomposition of the carbyl compounds {C5H4(CH2)(2)NR}TiR'(2) proceeds through alpha- and beta-H elimination to give stable aryne, alkylidene, and olefin. complexes in the presence of PMe3. Reaction of the dibenzyl compound {C5H4(CH2)(2)N-t-Bu}Ti(CH2Ph)(2) with B(C6F5)(3) gives the cationic [{C5H4(CH2)(2)N-t-Bu}TiCH2Ph](+), which is an active catalyst for the polymerization of ethene and propene

The impact of bone mineral density and disc degeneration on shear strength and stiffness of the lumbar spine following laminectomy

Purpose Laminectomy is a standard surgical procedure for elderly patients with symptomatic degenerative lumbar stenosis. The procedure aims at decompression of the affected nerves, but it also causes a reduction of spinal shear strength and shear stiffness. The magnitude of this reduction and the influence of bone mineral density (BMD) and disc degeneration are unknown. We studied the influence of laminectomy, BMD, and disc degeneration on shear force to failure (SFF) and shear stiffness (SS). Methods Ten human cadaveric lumbar spines were obtained (mean age 72.1 years, range 53-89 years). Laminectomy was performed either on L2 or L4, equally divided within the group of ten spines. BMD was assessed by dual X-ray absorptiometry (DXA). Low BMD was defined as a BMD value below the median. Intervertebral discs were assessed for degeneration by MRI (Pfirrmann) and scaled in mild and severe degeneration groups. Motion segments L2-L3 and L4-L5 were isolated from each spine. SFF and SS were measured, while loading simultaneously with 1,600 N axial compression. Results Low BMD had a significant negative effect on SFF. In addition, a significant interaction between low BMD and laminectomy was found. In the high BMD group, SFF was 2,482 N (range 1,678-3,284) and decreased to 1,371 N (range 940-1,886) after laminectomy. In the low BMD group, SFF was 1,339 N (range 909-1,628) and decreased to 761 N (range 561-1,221). Disc degeneration did not affect SFF, nor did it interact with laminectomy. Neither low BMD nor the interaction of low BMD and laminectomy did affect SS. Degeneration and its interaction with laminectomy did not significantly affect SS. Conclusions In conclusion, low BMD significantly decreased SFF before and after lumbar laminectomy. Therefore, DXA assessment may be an important asset to preoperative screening. Lumbar disc degeneration did not affect shear properties of lumbar segments before or after laminectomy. © 2012 Springer-Verlag

Degree of tumour vascularity correlates with drug accumulation and tumour response upon TNF-α-based isolated hepatic perfusion

Isolated hepatic perfusion (IHP) with melphalan with or without tumour necrosis factor alpha (TNF-α) is currently performed in clinical trials in patients with hepatic metastases. Previous studies led to the hypothesis that the use of TNF-α in isolated limb perfusion causes specific destruction of tumour endothelial cells and thereby induces an increased permeability of tumour vasculature. However, whether TNF-α contributes to the therapeutic efficacy in IHP still remains unclear. In an in vivo rat liver metastas

Is there evidence for accelerated polyethylene wear in uncemented compared to cemented acetabular components? A systematic review of the literature

Joint arthroplasty registries show an increased rate of aseptic loosening in uncemented acetabular components as compared to cemented acetabular components. Since loosening is associated with particulate wear debris, we postulated that uncemented acetabular components demonstrate a higher polyethylene wear rate than cemented acetabular components in total hip arthroplasty. We performed a systematic review of the peer-reviewed literature, comparing the wear rate in uncemented and cemented acetabular components in total hip arthroplasty. Studies were identified using MEDLINE (PubMed), EMBASE and the Cochrane Central Register of Controlled Trials. Study quality was assessed using the Grading of Recommendations Assessment, Development and Evaluation (GRADE) approach. The search resulted in 425 papers. After excluding duplicates and selection based on title and abstracts, nine studies were found eligible for further analysis: two randomised controlled trials, and seven observational studies. One randomised controlled trial found a higher polyethylene wear rate in uncemented acetabular components, while the other found no differences. Three out of seven observational studies showed a higher polyethylene wear in uncemented acetabular component fixation; the other four studies did not show any differences in wear rates. The available evidence suggests that a higher annual wear rate may be encountered in uncemented acetabular components as compared to cemented components

Isolated limb perfusion with actinomycin D and TNF-alpha results in improved tumour response in soft-tissue sarcoma-bearing rats but is accompanied by severe local toxicity

Previously we demonstrated that addition of Tumour Necrosis Factor-α to melphalan or doxorubicin in a so-called isolated limb perfusion results in synergistic antitumour responses of sarcomas in both animal models and patients. Yet, 20 to 30% of the treated tumours do not respond. Therefore agents that synergise with tumour necrosis factor alpha must be investigated. Actinomycin D is used in combination with melphalan in isolated limb perfusion in the treatment of patients with melanoma in-transit metastases and is well known to augment tumour cell sensitivity towards tumour necrosis factor alpha in vitro. Both agents are very toxic, which limits their systemic use. Their applicability may therefore be tested in the isolated limb perfusion setting, by which the tumours can be exposed to high concentrations in the absence of systemic exposure. To study the beneficial effect of the combination in vivo, BN-175 soft tissue sarcoma-bearing rats were perfused with various concentrations of actinomycin D and tumour necrosis factor alpha. When used alone the drugs had only little effect on the tumour. Only when actinomycin D and tumour necrosis factor alpha were combined a tumour response was achieved. However, these responses were accompanied by severe, dose limiting, local toxicity such as destruction of the muscle tissue and massive oedema. Our results show that isolated limb perfusion with actinomycin D in combination with tumour necrosis factor alpha leads to a synergistic anti-tumour response but also to idiosyncratic locoregional toxicity to the normal tissues. Actinomycin D, in combination with tumour necrosis factor alpha, should not be explored in the clinical setting because of this. The standard approach in the clinic remains isolated limb perfusion with tumour necrosis factor alpha in combination with melphalan

Long-term health-related and economic consequences of short-term outcomes in evaluation of perinatal interventions

<p>Abstract</p> <p>Background</p> <p>Many perinatal interventions are performed to improve long-term neonatal outcome. To evaluate the long-term effect of a perinatal intervention follow-up of the child after discharge from the hospital is necessary because serious sequelae from perinatal complications frequently manifest themselves only after several years. However, long-term follow-up is time-consuming, is not in the awareness of obstetricians, is expensive and falls outside the funding-period of most obstetric studies. Consequently, short-term outcomes are often reported instead of the primary long-term end-point. With this project, we will assess the current state of affairs concerning follow-up after obstetric RCTs and we will develop multivariable prediction models for different long-term health outcomes. Furthermore, we would like to encourage other researchers participating in follow-up studies after large obstetric trials (> 350 women) to inform us about their studies so that we can include their follow-up study in our systematic review. We would invite these researchers also to join our effort and to collaborate with us on the external validation of our prediction models.</p> <p>Methods/Design</p> <p>A systematic review of neonatal follow-up after obstetric studies will be performed. All reviews of the Cochrane Pregnancy and Childbirth group will be assessed for reviews on interventions that aimed to improve neonatal outcome. Reviews on interventions primary looking at other aspects than neonatal outcome such as labour progress will also be included when these interventions can change the outcome of the neonate on the short or long-term. Our review will be limited to RCTs with more than 350 women. Information that will be extracted from these RCTs will address whether, how and for how long follow-up has been performed. However, in many cases long-term follow-up of the infants will not be feasible. An alternative solution to limited follow-up could be to develop prediction models to estimate long-term health outcomes of the newborn based on specific perinatal outcomes and other covariates. For the development of multivariable prediction models for several health outcomes, we will use data available from a Dutch cohort study of preterm (< 32 weeks) and/or small for gestational age infants (< 1500 g). These infants were born in The Netherlands in 1983 and followed until they reached the age of 19.</p> <p>Discussion</p> <p>The systematic review will provide insight in the extent and methods used for follow-up assessments after obstetric RCTs in the past. The prediction models can be used by future studies to extrapolate short-term outcomes to a long-term horizon or to indicate for which neonates long-term follow-up is required, as their outcomes (either absence or presence of sequelae) cannot be adequately predicted from short-term outcomes and clinical background characteristics.</p

Informing the design of a national screening and treatment programme for chronic viral hepatitis in primary care: qualitative study of at-risk immigrant communities and healthcare professionals

n Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly credited. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise statedThis paper presents independent research funded by the National Institute for Health Research (NIHR) under the Programme Grants for Applied Research programme (RP-PG-1209-10038).

Contribution of genetic effects to genetic variance components with epistasis and linkage disequilibrium

<p>Abstract</p> <p>Background</p> <p>Cockerham genetic models are commonly used in quantitative trait loci (QTL) analysis with a special feature of partitioning genotypic variances into various genetic variance components, while the F_∞genetic models are widely used in genetic association studies. Over years, there have been some confusion about the relationship between these two type of models. A link between the additive, dominance and epistatic effects in an F_∞model and the additive, dominance and epistatic variance components in a Cockerham model has not been well established, especially when there are multiple QTL in presence of epistasis and linkage disequilibrium (LD).</p> <p>Results</p> <p>In this paper, we further explore the differences and links between the F_∞and Cockerham models. First, we show that the Cockerham type models are allelic based models with a special modification to correct a confounding problem. Several important moment functions, which are useful for partition of variance components in Cockerham models, are also derived. Next, we discuss properties of the F_∞models in partition of genotypic variances. Its difference from that of the Cockerham models is addressed. Finally, for a two-locus biallelic QTL model with epistasis and LD between the loci, we present detailed formulas for calculation of the genetic variance components in terms of the additive, dominant and epistatic effects in an F_∞model. A new way of linking the Cockerham and F_∞model parameters through their coding variables of genotypes is also proposed, which is especially useful when reduced F_∞models are applied.</p> <p>Conclusion</p> <p>The Cockerham type models are allele-based models with a focus on partition of genotypic variances into various genetic variance components, which are contributed by allelic effects and their interactions. By contrast, the F_∞regression models are genotype-based models focusing on modeling and testing of within-locus genotypic effects and locus-by-locus genotypic interactions. When there is no need to distinguish the paternal and maternal allelic effects, these two types of models are transferable. Transformation between an F_∞model's parameters and its corresponding Cockerham model's parameters can be established through a relationship between their coding variables of genotypes. Genetic variance components in terms of the additive, dominance and epistatic genetic effects in an F_∞model can then be calculated by translating formulas derived for the Cockerham models.</p

Anterior shear strength of the porcine lumbar spine after laminectomy and partial facetectomy

Degenerative lumbar spinal stenosis is the most common reason for lumbar surgery in patients in the age of 65 years and older. The standard surgical management is decompression of the spinal canal by laminectomy and partial facetectomy. The effect of this procedure on the shear strength of the spine has not yet been investigated in vitro. In the present study we determined the ultimate shear force to failure, the displacement and the shear stiffness after performing a laminectomy and a partial facetectomy. Eight lumbar spines of domestic pigs (7 months old) were sectioned to obtain eight L2–L3 and eight L4–L5 motion segments. All segments were loaded with a compression force of 1,600 N. In half of the 16 motion segments a laminectomy and a 50% partial facetectomy were applied. The median ultimate shear force to failure with laminectomy and partial facetectomy was 1,645 N (range 1,066–1,985) which was significantly smaller (p = 0.012) than the ultimate shear force to failure of the control segments (median 2,113, range 1,338–2,659). The median shear stiffness was 197.4 N/mm (range 119.2–216.7) with laminectomy and partial facetectomy which was significantly (p = 0.036) smaller than the stiffness of the control specimens (median 216.5, 188.1–250.2). It was concluded that laminectomy and partial facetectomy resulted in 22% reduction in ultimate shear force to failure and 9% reduction in shear stiffness. Although relatively small, these effects may explain why patients have an increased risk of sustaining shear force related vertebral fractures after spinal decompression surgery

The evolution of cyclodextrin glucanotransferase product specificity

Cyclodextrin glucanotransferases (CGTases) have attracted major interest from industry due to their unique capacity of forming large quantities of cyclic α-(1,4)-linked oligosaccharides (cyclodextrins) from starch. CGTases produce a mixture of cyclodextrins from starch consisting of 6 (α), 7 (β) and 8 (γ) glucose units. In an effort to identify the structural factors contributing to the evolutionary diversification of product specificity amongst this group of enzymes, we selected nine CGTases from both mesophilic, thermophilic and hyperthermophilic organisms for comparative product analysis. These enzymes displayed considerable variation regarding thermostability, initial rates, percentage of substrate conversion and ratio of α-, β- and γ-cyclodextrins formed from starch. Sequence comparison of these CGTases revealed that specific incorporation and/or substitution of amino acids at the substrate binding sites, during the evolutionary progression of these enzymes, resulted in diversification of cyclodextrin product specificity