Characterising refractive index dispersion in chalcogenide glasses

Much effort has been devoted to the study of glasses that contain the chalcogen elements (sulfur, selenium and tellurium) for photonics’ applications out to MIR wavelengths. In this paper we describe some techniques for determining the refractive index dispersion characteristics of these glasses. Knowledge of material dispersion is critical in delivering step-index fibres including with high numerical aperture for mid-infrared supercontinuum generation

Mid-IR supercontinuum generation in birefringent, low loss, ultra-high numerical aperture Ge-As-Se-Te chalcogenide step-index fiber

This work reports on the fabrication and subsequent supercontinuum generation in a Ge-As-Se-Te/Ge-As-Se core/clad chalcogenide step-index fiber with an elliptical-core and an ultra-high numerical aperture of 1.88 ± 0.02 from 2.5 - 15 µm wavelength. The fiber has very low transmission loss of < 2 dB/m from 5-11 µm and a minimum loss of 0.72 ± 0.04 dB/m at 8.56 µm. Supercontinuum spanning from 2.1 µm to 11.5 µm with an average power of ∼6.5 mW was achieved by pumping a ∼16 cm fiber with a minor/major axis core diameter of 4.2/5.2 µm with 250 fs pulses at 4.65 µm wavelength and a repetition rate of 20.88 MHz. The effect of the elliptical-core was investigated by means of mechanical rotation of the fiber relative to the linear pump polarization, and it was found to cause a shift in the supercontinuum spectral edges by several hundred nanometers

Determining the refractive index dispersion and thickness of hot-pressed chalcogenide thin films from an improved Swanepoel method

The well-known method presented by Swanepoel can be used to determine the refractive index dispersion of thin films in the near-infrared region from wavelength values at maxima and minima, only, of the transmission interference fringes. In order to extend this method into the mid-infrared (MIR) spectral region (our measurements are over the wavelength range from 2 to 25 μm), the method is improved by using a two-term Sellmeier model instead of the Cauchy model as the dispersive equation. Chalcogenide thin films of nominal batch composition As40Se60 (atomic %) and Ge16As24Se15.5Te44.5 (atomic %) are prepared by a hot-pressing technique. The refractive index dispersion of the chalcogenide thin films is determined by the improved method with a standard deviation of less than 0.0027. The accuracy of the method is shown to be better than 0.4% at a wavelength of 3.1 μm by comparison with a benchmark refractive index value obtained from prism measurements on Ge16As24Se15.5Te44.5 material taken from the same batch

Nonperturbative renormalization group approach to frustrated magnets

This article is devoted to the study of the critical properties of classical XY and Heisenberg frustrated magnets in three dimensions. We first analyze the experimental and numerical situations. We show that the unusual behaviors encountered in these systems, typically nonuniversal scaling, are hardly compatible with the hypothesis of a second order phase transition. We then review the various perturbative and early nonperturbative approaches used to investigate these systems. We argue that none of them provides a completely satisfactory description of the three-dimensional critical behavior. We then recall the principles of the nonperturbative approach - the effective average action method - that we have used to investigate the physics of frustrated magnets. First, we recall the treatment of the unfrustrated - O(N) - case with this method. This allows to introduce its technical aspects. Then, we show how this method unables to clarify most of the problems encountered in the previous theoretical descriptions of frustrated magnets. Firstly, we get an explanation of the long-standing mismatch between different perturbative approaches which consists in a nonperturbative mechanism of annihilation of fixed points between two and three dimensions. Secondly, we get a coherent picture of the physics of frustrated magnets in qualitative and (semi-) quantitative agreement with the numerical and experimental results. The central feature that emerges from our approach is the existence of scaling behaviors without fixed or pseudo-fixed point and that relies on a slowing-down of the renormalization group flow in a whole region in the coupling constants space. This phenomenon allows to explain the occurence of generic weak first order behaviors and to understand the absence of universality in the critical behavior of frustrated magnets.Comment: 58 pages, 15 PS figure

Cross-amplification of EST-derived markers among 16 grass species

The availability of a large number of expressed sequence tags (ESTs) has facilitated the development of molecular markers in members of the grass family. As these markers are derived from coding sequences, cross-species amplification and transferability is higher than for markers designed from genomic DNA sequences. In this study, 919 EST-based primers developed from seven grass species were assessed for their amplification across a diverse panel of 16 grass species including cereal, turf and forage crops. Out of the 919 primers tested, 89 successfully amplified DNA from one or more species and 340 primers generated PCR amplicons from at least half of the species in the panel. Only 5.2% of the primers tested produced clear amplicons in all 16 species. The majority of the primers (66.9%) were developed from tall fescue and rice and these two species showed amplification rate of 41.6% and 19.0% across the panel, respectively. The highest amplification rate was found for conserved-intron scanning primers (CISP) developed from pearl millet (91%) and sorghum (75%) EST sequences that aligned to rice sequences. The primers with successful amplification identified in this study showed promise in other grass species as demonstrated in differentiating a set of 13 clones of reed canary grass, a species for which very little genomic research has been done. Sequences from the amplified PCR fragments indicated the potential for the transferable CISP markers for comparative mapping purposes. These primer sets can be immediately used for within and across species mapping and will be especially useful for minor grass species with few or no available molecular markers

Incidence, patterns and severity of reported unintentional injuries in Pakistan for persons five years and older: results of the National Health Survey of Pakistan 1990–94

<p>Abstract</p> <p>Background</p> <p>National level estimates of injuries are not readily available for developing countries. This study estimated the annual incidence, patterns and severity of unintentional injuries among persons over five years of age in Pakistan.</p> <p>Methods</p> <p>National Health Survey of Pakistan (NHSP 1990–94) is a nationally representative survey of the household. Through a two-stage stratified design, 18, 315 persons over 5 years of age were interviewed to estimate the overall annual incidence, patterns and severity of unintentional injuries for males and females in urban and rural areas over the preceding one year. Weighted estimates were computed adjusting for complex survey design using <it>surveyfreq </it>and <it>surveylogistic </it>option of SAS 9.1 software.</p> <p>Results</p> <p>The overall annual incidence of all unintentional injuries was 45.9 (CI: 39.3–52.5) per 1000 per year; 59.2 (CI: 49.2–69.2) and 33.2 (CI: 27.0–39.4) per 1000 per year among males and females over five years of age, respectively. An estimated 6.16 million unintentional injuries occur in Pakistan annually among persons over five years of age. Urban and rural injuries were 55.9 (95% CI: 48.1–63.7) and 41.2 (95% CI: 32.2–50.0) per 1000 per year, respectively. The annual incidence of injuries due to falls were 22.2 (95% CI: 18.0–26.4), poisoning 3.3 (95%CI: 0.5–6.1) and burn was 1.5 (95%CI: 0.9–2.1) per 1000 per year. The majority of injuries occurred at home 19.2 (95%CI: 16.0–22.4) or on the roads 17.0 (95%CI: 13.8–20.2). Road traffic/street, school and urban injuries were more likely to result in handicap.</p> <p>Conclusion</p> <p>There is high burden of unintentional injuries among persons over five years of age in Pakistan. These results are useful to plan further studies and prioritizing prevention programs on injuries nationally and other developing countries with similar situation.</p

Benchmark problems for robust control design

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/76996/1/AIAA-20949-475.pd