The impact of interpersonal racism on oral health related quality of life among Indigenous South Australians: a cross-sectional study

Background: Interpersonal racism has had a profound impact on Indigenous populations globally, manifesting as negative experiences and discrimination at an individual, institutional and systemic level. Interpersonal racism has been shown to negatively influence a range of health outcomes but has received limited attention in the context of oral health. The aim of this paper was to examine the effects of experiences of interpersonal racism on oral healthrelated quality of life (OHRQoL) among Indigenous South Australians. Methods: Data were sourced from a large convenience sample of Indigenous South Australian adults between February 2018 and January 2019. Questionnaires were used to collect data on sociodemographic characteristics, cultural values, utilization of dental services, and other related factors. OHRQoL was captured using the Oral Health Impact Profile (OHIP-14) questionnaire. We defined the dependent variable ’poor OHRQoL’ as the presence of one or more OHIP-14 items rated as ‘very often’ or ‘fairly often’. Experiences of racism were recorded using the Measure of Indigenous Racism Experiences instrument. Interpersonal racism was classified into two categories (‘no racism’ vs ‘any racism in ≥ 1 setting’) and three categories (’no racism’, ’low racism’ (experienced in 1–3 settings), and ’high racism’ (experienced in 4–9 settings)). Logistic regression was used to examine associations between interpersonal racism, covariates and OHRQoL, adjusting for potential confounding related to socioeconomic factors and access to dental services. Results: Data were available from 885 participants (88.7% of the total cohort). Overall, 52.1% reported experiencing any interpersonal racism in the previous 12 months, approximately one-third (31.6%) were classified as experiencing low racism, and one-fifth (20.5%) experienced high racism. Poor OHRQoL was reported by half the participants (50.2%). Relative to no experiences of racism in the previous 12 months, those who experienced any racism (≥ 1 setting) were significantly more likely to report poor OHRQoL (Odds Ratio (OR): 1.43; 95% Confidence Interval (CI): 1.08–1.92), after adjusting for age, education level, possession of an income-tested health care card, car ownership, self-reported oral health status, timing of and reason for last dental visit, not going to a dentist because of cost, and having no family support. This was particularly seen among females, where, relative to males, the odds of having poor OHRQoL among females experiencing racism were 1.74 times higher (95% CI: 1.07–2.81). Conclusion: Our findings indicate that the experience of interpersonal racism has a negative impact on OHRQoL among Indigenous Australians. The association persisted after adjusting for potential confounding factors. Identifying this link adds weight to the importance of addressing OHRQoL among South Australian’s Indigenous population by implementing culturally-sensitive strategies to address interpersonal racism.Anna Ali, Alice R. Rumbold, Kostas Kapellas, Zohra S. Lassi, Joanne Hedges and Lisa Jamieso

Paradoxical family practices: LGBTQ+ young people, mental health and wellbeing

This article will explore how LGBTQ+ young people sustain, and in some cases survive, family relationships. We develop the concept of ‘paradoxical family practices’ and use this to demonstrate the ways in which LGBTQ+ young people manage family life through everyday emotion work. This highlights: (1) how families ordinarily navigate heteronormativity and ‘issues’ of gender/sexuality; (2) the efficacy of ‘paradoxical family practices’ as a conceptual tool; (3) the value of emotion-centred multiple qualitative methods to explore the lives of LGBTQ+ young people and mental health. Findings derive from a small-scale UK study funded by the Wellcome Trust (UNS39780) and were generated through a two-stage methodology comprising digital/paper emotion maps and qualitative interviews with LGBTQ+ young people aged 16–25 (n = 12) followed by diary methods and follow-up interviews (n = 9). Interviews were also completed with ‘family members’ (n = 7)

Visual Analysis of a Cold Rolling Process Using Data-Based Modeling

International Conference on Engineering Applications of Neural Networks (13th. 2012. Coventry Univ, Otaniemi, Finland

Organic photovoltaic devices with enhanced efficiency processed from non-halogenated binary solvent blends

The development of processing routes to fabricate organic photovoltaic devices (OPVs) using non-halogenated solvents is a necessary step towards their eventual commercialisation. To address this issue, we have used Hansen solubility parameter analysis to identify a non-halogenated solvent blend based on a mixture of carbon disulphide and acetone. This solvent blend was then used to deposit a donor–acceptor polymer–fullerene thin-film that was then used as the active layer of bulk-heterojunction OPV. For the benchmark polymer:fullerene system PCDTBT:PC70BM, a power conversion efficiency of 6.75% was achieved; a 20% relative improvement over reference cells processed using the chlorinated-solvent chlorobenzene. Improvements in device efficiency are attributed to an increase in electron and hole conductivity resulting from enhanced fullerene crystallisation; a property that leads to enhanced device efficiency through improved charge extraction

Strawberry fruit resistance to simulated handling

Harvest operations are currently the main source of mechanical injury of strawberry (Fragaria x ananassa Duch.). Experiments were designed to simulate conditions encountered during commercial handling. Individual fruits were subjected to impact or compression forces with similar energy to determine the sensitivity to mechanical injury. Bruise volume was used as the measurement of injury. Bruise severity increased as a function of impact energy for both impact types. However, dropped fruits had larger bruise volume than fruits submitted to pendulum impactor at the same energy level. Doubling the impact energy (0.040 to 0.083 J) increased bruise volume by 7 times (13 to 91 mm³). Fruits dropped from 380 mm (0.075 J) showed 71% greater bruise volume than those dropped from either 130 mm (0.025 J) or 200 mm (0.040 J). Compressed fruits showed higher bruise volume than other tests. Some cultivars are more susceptible to compression forces than others. 'Sweet Charlie' berries showed bruise volume 40% higher than the others cultivars when subjected to compression. Fruits subjected to impact showed bruise volume lower than the compressed fruits, indicating the possibility to be handled and graded in a packing line.A etapa de colheita é a principal fonte de danos físicos ao morango (Fragaria x ananassa Duch.). Experimentos foram realizados para simular condições encontradas durante manuseio. Frutos foram submetidos individualmente às forças de impacto e compressão em energias similares para determinar sensibilidade dos frutos a danos físicos. Volume da injúria física foi utilizado para mensurar a incidência do dano físico ocorrido. Severidade da lesão aumenta, com incremento da energia, tanto para força de impacto como para compressão. Todavia, frutos submetidos à queda livre demonstraram maiores volumes de danos físicos do que frutos submetidos a danos ocasionados por pendulo no mesmo nível de energia. Dobrando a energia de impacto (0,040 para 0,083 J) ocorreu aumento no volume da injúria em sete vezes (13 para 91 mm³). Frutos submetidos à queda de 380 mm (0,075 J) demonstraram volumes de danos físicos 71% superiores do que aqueles ocasionados em queda de 130 mm (0,025 J) ou 200 mm (0,040 J). Frutos em teste de compressão mostraram maiores volumes de injúrias físicas do que outros testes. Alguns cultivares são mais sensíveis à força de compressão do que outros. Frutos cultivar 'Sweet Charlie' apresentaram volume de injúria 40% superiores do que outros quando submetidos à força de compressão. Morangos submetidos à força de impacto demonstraram volume de injúria inferior do que aqueles comprimidos, indicando a possibilidade dos morangos serem classificados e manuseados em uma linha de beneficiamento

An Electrode Array for Limiting Blood Loss During Liver Resection: Optimization via Mathematical Modeling

Liver resection is the current standard treatment for patients with both primary and metastatic liver cancer. The principal causes of morbidity and mortality after liver resection are related to blood loss (typically between 0.5 and 1 L), especially in cases where transfusion is required. Blood transfusions have been correlated with decreased long-term survival, increased risk of perioperative mortality and complications. The goal of this study was to evaluate different designs of a radiofrequency (RF) electrode array for use during liver resection. The purpose of this electrode array is to coagulate a slice of tissue including large vessels before resecting along that plane, thereby significantly reducing blood loss. Finite Element Method models were created to evaluate monopolar and bipolar power application, needle and blade shaped electrodes, as well as different electrode distances. Electric current density, temperature distribution, and coagulation zone sizes were measured. The best performance was achieved with a design of blade shaped electrodes (5 × 0.1 mm cross section) spaced 1.5 cm apart. The electrodes have power applied in bipolar mode to two adjacent electrodes, then switched sequentially in short intervals between electrode pairs to rapidly heat the tissue slice. This device produces a ~1.5 cm wide coagulation zone, with temperatures over 97 ºC throughout the tissue slice within 3 min, and may facilitate coagulation of large vessels

Carotid Intima-Media Thickness Progression as Surrogate Marker for Cardiovascular Risk Meta-Analysis of 119 Clinical Trials Involving 100 667 Patients

Background: To quantify the association between effects of interventions on carotid intima-media thickness (cIMT) progression and their effects on cardiovascular disease (CVD) risk. Methods: We systematically collated data from randomized, controlled trials. cIMT was assessed as the mean value at the common-carotid-artery; if unavailable, the maximum value at the common-carotid-artery or other cIMT measures were used. The primary outcome was a combined CVD end point defined as myocardial infarction, stroke, revascularization procedures, or fatal CVD. We estimated intervention effects on cIMT progression and incident CVD for each trial, before relating the 2 using a Bayesian meta-regression approach. Results: We analyzed data of 119 randomized, controlled trials involving 100 667 patients (mean age 62 years, 42% female). Over an average follow-up of 3.7 years, 12 038 patients developed the combined CVD end point. Across all interventions, each 10 μm/y reduction of cIMT progression resulted in a relative risk for CVD of 0.91 (95% Credible Interval, 0.87–0.94), with an additional relative risk for CVD of 0.92 (0.87–0.97) being achieved independent of cIMT progression. Taken together, we estimated that interventions reducing cIMT progression by 10, 20, 30, or 40 μm/y would yield relative risks of 0.84 (0.75–0.93), 0.76 (0.67–0.85), 0.69 (0.59–0.79), or 0.63 (0.52–0.74), respectively. Results were similar when grouping trials by type of intervention, time of conduct, time to ultrasound follow-up, availability of individual-participant data, primary versus secondary prevention trials, type of cIMT measurement, and proportion of female patients. Conclusions: The extent of intervention effects on cIMT progression predicted the degree of CVD risk reduction. This provides a missing link supporting the usefulness of cIMT progression as a surrogate marker for CVD risk in clinical trials

A community-based geological reconstruction of Antarctic Ice Sheet deglaciation since the Last Glacial Maximum

A robust understanding of Antarctic Ice Sheet deglacial history since the Last Glacial Maximum is important in order to constrain ice sheet and glacial-isostatic adjustment models, and to explore the forcing mechanisms responsible for ice sheet retreat. Such understanding can be derived from a broad range of geological and glaciological datasets and recent decades have seen an upsurge in such data gathering around the continent and Sub-Antarctic islands. Here, we report a new synthesis of those datasets, based on an accompanying series of reviews of the geological data, organised by sector. We present a series of timeslice maps for 20 ka, 15 ka, 10 ka and 5 ka, including grounding line position and ice sheet thickness changes, along with a clear assessment of levels of confidence. The reconstruction shows that the Antarctic Ice sheet did not everywhere reach the continental shelf edge at its maximum, that initial retreat was asynchronous, and that the spatial pattern of deglaciation was highly variable, particularly on the inner shelf. The deglacial reconstruction is consistent with a moderate overall excess ice volume and with a relatively small Antarctic contribution to meltwater pulse 1a. We discuss key areas of uncertainty both around the continent and by time interval, and we highlight potential priorities for future work. The synthesis is intended to be a resource for the modelling and glacial geological community

Combination of searches for Higgs boson pairs in pp collisions at \sqrts = 13 TeV with the ATLAS detector

This letter presents a combination of searches for Higgs boson pair production using up to 36.1 fb(-1) of proton-proton collision data at a centre-of-mass energy root s = 13 TeV recorded with the ATLAS detector at the LHC. The combination is performed using six analyses searching for Higgs boson pairs decaying into the b (b) over barb (b) over bar, b (b) over barW(+)W(-), b (b) over bar tau(+)tau(-), W+W-W+W-, b (b) over bar gamma gamma and W+W-gamma gamma final states. Results are presented for non-resonant and resonant Higgs boson pair production modes. No statistically significant excess in data above the Standard Model predictions is found. The combined observed (expected) limit at 95% confidence level on the non-resonant Higgs boson pair production cross-section is 6.9 (10) times the predicted Standard Model cross-section. Limits are also set on the ratio (kappa(lambda)) of the Higgs boson self-coupling to its Standard Model value. This ratio is constrained at 95% confidence level in observation (expectation) to -5.0 &lt; kappa(lambda) &lt; 12.0 (-5.8 &lt; kappa(lambda) &lt; 12.0). In addition, limits are set on the production of narrow scalar resonances and spin-2 Kaluza-Klein Randall-Sundrum gravitons. Exclusion regions are also provided in the parameter space of the habemus Minimal Supersymmetric Standard Model and the Electroweak Singlet Model. For complete list of authors see http://dx.doi.org/10.1016/j.physletb.2019.135103</p