Analysis of Stator/Rotor Pole Combinations in Variable Flux Reluctance Machines Using Magnetic Gearing Effect

The torque production of variable flux reluctance machines (VFRMs) is explained by the “magnetic gearing effect” in recent research. Based on this theory, this paper concludes the general principles for feasible stator/rotor pole selection and corresponding winding configuration for VFRMs. The influence of stator/rotor pole combination on torque performance is comprehensively investigated not only in terms of average torque and torque ripple, but also in terms of each single torque component. It is found that the synchronous torque is proportional to the fundamental rotor radial permeance component and has the dominant contribution in average torque for all the VFRMs. The stator slot number and rotor pole number should be close to each other to achieve the highest output torque. Meanwhile, the 6-stator-slot/(6i ± 2)-rotor-pole (6s/(6i ± 2)r) and their multiples are large torque ripple origins for VFRMs due to the large reluctance torque ripple. Also, it is proved that a lower stator slot number is preferable choice to obtain higher torque/copper loss ratio, whereas a higher stator slot number is more suitable for large machine scale scenario. Finally, the analyses and conclusions are verified by finite element analysis on the 6-, 12-, 18-, and 24-stator-slot VFRMs and by experimental tests on a 6s/7r and 6s/8r VFRMs

Comparative Analysis of Variable Flux Reluctance Machines With Double- and Single-Layer Concentrated Armature Windings

In this paper, the variable flux reluctance machines (VFRMs) with double- and single-layer concentrated armature windings are comparatively analyzed. First, the single-layer winding is found to have an identical winding factor as a double-layer winding, but significantly larger peak value of magneto-motive force, which will result in severe local saturation in cores of VFRMs with single-layer winding. Then, based on the magnetic gearing effect and finite-element analysis, the electromagnetic performances of VFRMs with both winding types are compared. The VFRMs with single-layer winding are proved to be always lower in average torque, higher in torque ripple, larger in iron loss, and lower in efficiency than those with double-layer winding. Nevertheless, better fault-tolerance capability is achieved for a single-layer winding due to its physical separation between phases and larger phase self-inductance. Overall, the double-layer armature winding is the preferable choice for the VFRMs. Finally, a 6-stator-slot/4-rotor-pole VFRM with both double- and single-layer windings is prototyped for verification

Rotor shaping method for torque ripple mitigation in variable flux reluctance machines

In this paper, four rotor shaping methods, i.e., eccentric circular, inverse cosine, inverse cosine with third harmonic, and multi-step shaping methods, are developed and compared for torque ripple mitigation in variable flux reluctance machines (VFRMs). By using a 6-stator-pole/7-rotor-pole (6/7) VFRM as an example, the design criterions and capabilities of these four methods are illustrated. It is found that all the rotor shaping methods are capable of torque ripple mitigation and applicable to all the VFRMs except those with 6 k /(6 i ± 2) k ( k , i = 1, 2, 3…) stator/rotor pole combinations. Moreover, the inverse cosine with third harmonic and multi-step shaping methods are found to have the best performance. They are able to reduce the torque ripple by 90% at a cost of only 3% torque density reduction. A 6/7 VFRM with both conventional and shaped rotors is prototyped and tested for verification

The Periodic Instability of Diameter of ZnO Nanowires via a Self-oscillatory Mechanism

ZnO nanowires with a periodic instability of diameter were successfully prepared by a thermal physical vapor deposition method. The morphology of ZnO nanowires was investigated by SEM. SEM shows ZnO possess periodic bead-like structure. The instability only appears when the diameter of ZnO nanowires is small. The kinetics and mechanism of Instability was discussed at length. The appearance of the instability is due to negative feed-back mechanism under certain experimental conditions (crystallization temperature, vapor supersaturation, etc)

Public mental health problems during COVID-19 pandemic: a large-scale meta-analysis of the evidence

The coronavirus disease 2019 (COVID-19) pandemic has exposed humans to the highest physical and mental risks. Thus, it is becoming a priority to probe the mental health problems experienced during the pandemic in different populations. We performed a meta-analysis to clarify the prevalence of postpandemic mental health problems. Seventy-one published papers (n = 146,139) from China, the United States, Japan, India, and Turkey were eligible to be included in the data pool. These papers reported results for Chinese, Japanese, Italian, American, Turkish, Indian, Spanish, Greek, and Singaporean populations. The results demonstrated a total prevalence of anxiety symptoms of 32.60% (95% confidence interval (CI): 29.10-36.30) during the COVID-19 pandemic. For depression, a prevalence of 27.60% (95% CI: 24.00-31.60) was found. Further, insomnia was found to have a prevalence of 30.30% (95% CI: 24.60-36.60). Of the total study population, 16.70% (95% CI: 8.90-29.20) experienced post-traumatic stress disorder (PTSD) symptoms during the COVID-19 pandemic. Subgroup analysis revealed the highest prevalence of anxiety (63.90%) and depression (55.40%) in confirmed and suspected patients compared with other cohorts. Notably, the prevalence of each symptom in other countries was higher than that in China. Finally, the prevalence of each mental problem differed depending on the measurement tools used. In conclusion, this study revealed the prevalence of mental problems during the COVID-19 pandemic by using a fairly large-scale sample and further clarified that the heterogeneous results for these mental health problems may be due to the nonstandardized use of psychometric tools.Action Contro

Branes, Anti-Branes and Brauer Algebras in Gauge-Gravity duality

We propose gauge theory operators built using a complex Matrix scalar which are dual to brane-anti-brane systems in $AdS_5 \times S^5$, in the zero coupling limit of the dual Yang-Mills. The branes involved are half-BPS giant gravitons. The proposed operators dual to giant-anti-giant configurations satisfy the appropriate orthogonality properties. Projection operators in Brauer algebras are used to construct the relevant multi-trace Matrix operators. These are related to the ``coupled representations'' which appear in 2D Yang-Mills theory. We discuss the implications of these results for the quantum mechanics of a complex matrix model, the counting of non-supersymmetric operators and the physics of brane-anti-brane systems. The stringy exclusion principle known from the properties of half-BPS giant gravitons, has a new incarnation in this context. It involves a qualitative change in the map between brane-anti-brane states to gauge theory operators. In the case of a pair of sphere giant and anti-giant this change occurs when the sum of the magnitudes of their angular momenta reaches $N$.Comment: 52 pages, 10 figure

Structure of Schlafen13 reveals a new class of tRNA/rRNA- targeting RNase engaged in translational control

Cleavage of transfer (t)RNA and ribosomal (r)RNA are critical and conserved steps of translational control for cells to overcome varied environmental stresses. However, enzymes that are responsible for this event have not been fully identified in high eukaryotes. Here, we report a mammalian tRNA/rRNA-targeting endoribonuclease: SLFN13, a member of the Schlafen family. Structural study reveals a unique pseudo-dimeric U-pillow-shaped architecture of the SLFN13 N'-domain that may clamp base-paired RNAs. SLFN13 is able to digest tRNAs and rRNAs in vitro, and the endonucleolytic cleavage dissevers 11 nucleotides from the 3'-terminus of tRNA at the acceptor stem. The cytoplasmically localised SLFN13 inhibits protein synthesis in 293T cells. Moreover, SLFN13 restricts HIV replication in a nucleolytic activity-dependent manner. According to these observations, we term SLFN13 RNase S13. Our study provides insights into the modulation of translational machinery in high eukaryotes, and sheds light on the functional mechanisms of the Schlafen family

FAM46B is a prokaryotic-like cytoplasmic poly(A) polymerase essential in human embryonic stem cells

Family with sequence similarity (FAM46) proteins are newly identified metazoan-specific poly(A) polymerases (PAPs). Although predicted as Gld-2-like eukaryotic non-canonical PAPs, the detailed architecture of FAM46 proteins is still unclear. Exact biological functions for most of FAM46 proteins also remain largely unknown. Here, we report the first crystal structure of a FAM46 protein, FAM46B. FAM46B is composed of a prominently larger N-terminal catalytic domain as compared to known eukaryotic PAPs, and a C-terminal helical domain. FAM46B resembles prokaryotic PAP/CCA-adding enzymes in overall folding as well as certain inter-domain connections, which distinguishes FAM46B from other eukaryotic non-canonical PAPs. Biochemical analysis reveals that FAM46B is an active PAP, and prefers adenosine-rich substrate RNAs. FAM46B is uniquely and highly expressed in human pre-implantation embryos and pluripotent stem cells, but sharply down-regulated following differentiation. FAM46B is localized to both cell nucleus and cytosol, and is indispensable for the viability of human embryonic stem cells. Knock-out of FAM46B is lethal. Knock-down of FAM46B induces apoptosis and restricts protein synthesis. The identification of the bacterial-like FAM46B, as a pluripotent stem cell-specific PAP involved in the maintenance of translational efficiency, provides important clues for further functional studies of this PAP in the early embryonic development of high eukaryotes

Partonic flow and ϕ\phi-meson production in Au+Au collisions at sNN\sqrt{s_{NN}} = 200 GeV

We present first measurements of the $\phi$-meson elliptic flow ($v_{2}(p_{T})$) and high statistics $p_{T}$ distributions for different centralities from $\sqrt{s_{NN}}$ = 200 GeV Au+Au collisions at RHIC. In minimum bias collisions the $v_{2}$ of the $\phi$ meson is consistent with the trend observed for mesons. The ratio of the yields of the $\Omega$ to those of the $\phi$ as a function of transverse momentum is consistent with a model based on the recombination of thermal $s$ quarks up to $p_{T}\sim 4$ GeV/$c$, but disagrees at higher momenta. The nuclear modification factor ($R_{CP}$) of $\phi$ follows the trend observed in the $K^{0}_{S}$ mesons rather than in $\Lambda$ baryons, supporting baryon-meson scaling. Since $\phi$-mesons are made via coalescence of seemingly thermalized $s$ quarks in central Au+Au collisions, the observations imply hot and dense matter with partonic collectivity has been formed at RHIC.Comment: 6 pages, 4 figures, submit to PR