The role of p53 in atherosclerosis

Although the role of the tumour suppressor gene p53 is well known in cancer, recent studies have highlighted a fundamental role for p53 in regulating cells in the advanced atherosclerotic plaque, the major cause of heart attacks and stroke. In particular, p53 is activated in the complex environment of the plaque, in part by DNA damage within the lesion, and regulates growth arrest, cell senescence and apoptosis of vascular smooth muscle cells (VSMCs). The role of endogenous p53 has been determined using p53 knockout in mice developing advanced atherosclerosis, using bone marrow transplant to separate effects on blood cells from vessel wall cells. These studies have produced apparently contradictory and surprising results. In particular, recent studies have identified a role for endogenous p53 in protection of VSMCs from apoptosis, trans-differentiation of bone marrow stromal cells into VSMCs in atherosclerosis, and altering the mode of cell death in the plaque

The Ideology of Work and the Pandemic in Britain

The celebration of “key workers” in Britain during the pandemic forms the basis of what Althusser described as an “ideology of work,” a largely humanistic ideological machinery deployed in the service of maintaining and reproducing capitalist relations of production in the face of the present crisis. As opposed to a benign expression of national unity in response to a threat, this essay argues that the ideological celebration of key workers in Britain has been crucial to the protection of key accumulation strategies threatened by the crisis and to the neutralization of any potential resistance by those workers endangered by these strategies. This ideology of work has underpinned the implementation of numerous social policies in the service of protecting these relations of production: a fact which this essay argues must be adequately confronted prior to the imagination of alternative social policies and social futures after the pandemic

'Social Labor' and the Marxist Critique of Work

This paper argues that when it comes to thinking about work and labor, Marxism experiences a continued difficulty in holding theory and politics together without reliance on the concept of "social labor": a humanist ideological concept which mystifies the role of social relations in explaining work under capitalism. The evidence for this is collected through a reading of a number of important contributions within the Marxist sociology of work. At its conclusion, the paper turns back to Althusser and his critique of work and ideology in order to point towards the framework for an alternative critique of work that makes a conceptual move away from humanist ideas of alienation and social labor, towards materialist notions of interpellation and social relations

Detection of blood clots using a whole stent as an active implantable biosensor

Many cardiovascular problems stem from blockages that form within the vasculature and often treatment includes fitting a stent through percutaneous coronary intervention. This offers a minimally invasive therapy but re-occlusion through restenosis or thrombosis formation often occurs post-deployment. Research is ongoing into the creation of smart stents that can detect the occurrence of further problems. In this study, it is shown that selectively metalizing a non-conductive stent can create a set of electrodes that are capable of detecting a build-up of material around the stent. The associated increase in electrical impedance across the electrodes is measured, testing the stent with blood clot to mimic thrombosis. It is shown that the device is capable of sensing different amounts of occlusion. The stent can reproducibly sense the presence of clot showing a 16% +/−3% increase in impedance which is sufficient to reliably detect the clot when surrounded by explanted aorta (one sample t-test, p = 0.009, n = 9). It is demonstrated that this approach can be extended beyond the 3D printed prototypes by showing that it can be applied to a commercially available stent and it is believed that it can be further utilized by other types of medical implants

Performance Test Results of the NASA-457M v2 Hall Thruster

Performance testing of a second generation, 50 kW-class Hall thruster labeled NASA-457M v2 was conducted at the NASA Glenn Research Center. This NASA-designed thruster is an excellent candidate for a solar electric propulsion system that supports human exploration missions. Thruster discharge power was varied from 5 to 50 kW over discharge voltage and current ranges of 200 to 500 V and 15 to 100 A, respectively. Anode efficiencies varied from 0.56 to 0.71. The peak efficiency was similar to that of other state-of-the-art high power Hall thrusters, but outperformed these thrusters at lower discharge voltages. The 0.05 to 0.18 higher anode efficiencies of this thruster compared to its predecessor were primarily due to which of two stable discharge modes the thruster was operated. One stable mode was at low magnetic field strengths, which produced high anode efficiencies, and the other at high magnetic fields where its predecessor was operated. Cathode keeper voltages were always within 2.1 to 6.2 V and cathode voltages were within 13 V of tank ground during high anode efficiency operation. However, during operation at high magnetic fields, cathode-to-ground voltage magnitudes increased dramatically, exceeding 30 V, due to the high axial magnetic field strengths in the immediate vicinity of the centrally-mounted cathode. The peak thrust was 2.3 N and this occurred at a total thruster input power of 50.0 kW at a 500 V discharge voltage. The thruster demonstrated a thrust-to-power range of 76.4 mN/kW at low power to 46.1 mN/kW at full power, and a specific impulse range of 1420 to 2740 s. For a discharge voltage of 300 V, where specific impulses would be about 2000 s, thrust efficiencies varied from 0.57 to 0.63

The status of GEO 600

The GEO 600 laser interferometer with 600m armlength is part of a worldwide network of gravitational wave detectors. GEO 600 is unique in having advanced multiple pendulum suspensions with a monolithic last stage and in employing a signal recycled optical design. This paper describes the recent commissioning of the interferometer and its operation in signal recycled mode

Measurement of the Bottom-Strange Meson Mixing Phase in the Full CDF Data Set

We report a measurement of the bottom-strange meson mixing phase \beta_s using the time evolution of B0_s -> J/\psi (->\mu+\mu-) \phi (-> K+ K-) decays in which the quark-flavor content of the bottom-strange meson is identified at production. This measurement uses the full data set of proton-antiproton collisions at sqrt(s)= 1.96 TeV collected by the Collider Detector experiment at the Fermilab Tevatron, corresponding to 9.6 fb-1 of integrated luminosity. We report confidence regions in the two-dimensional space of \beta_s and the B0_s decay-width difference \Delta\Gamma_s, and measure \beta_s in [-\pi/2, -1.51] U [-0.06, 0.30] U [1.26, \pi/2] at the 68% confidence level, in agreement with the standard model expectation. Assuming the standard model value of \beta_s, we also determine \Delta\Gamma_s = 0.068 +- 0.026 (stat) +- 0.009 (syst) ps-1 and the mean B0_s lifetime, \tau_s = 1.528 +- 0.019 (stat) +- 0.009 (syst) ps, which are consistent and competitive with determinations by other experiments.Comment: 8 pages, 2 figures, Phys. Rev. Lett 109, 171802 (2012

First narrow-band search for continuous gravitational waves from known pulsars in advanced detector data

Spinning neutron stars asymmetric with respect to their rotation axis are potential sources of continuous gravitational waves for ground-based interferometric detectors. In the case of known pulsars a fully coherent search, based on matched filtering, which uses the position and rotational parameters obtained from electromagnetic observations, can be carried out. Matched filtering maximizes the signalto- noise (SNR) ratio, but a large sensitivity loss is expected in case of even a very small mismatch between the assumed and the true signal parameters. For this reason, narrow-band analysis methods have been developed, allowing a fully coherent search for gravitational waves from known pulsars over a fraction of a hertz and several spin-down values. In this paper we describe a narrow-band search of 11 pulsars using data from Advanced LIGO’s first observing run. Although we have found several initial outliers, further studies show no significant evidence for the presence of a gravitational wave signal. Finally, we have placed upper limits on the signal strain amplitude lower than the spin-down limit for 5 of the 11 targets over the bands searched; in the case of J1813-1749 the spin-down limit has been beaten for the first time. For an additional 3 targets, the median upper limit across the search bands is below the spin-down limit. This is the most sensitive narrow-band search for continuous gravitational waves carried out so far

Generation of ultrabright beams in high energy Nd:glass and KrF laser systems

The development of ultrabright lasers is progressing rapidly particularly in the direction of table-top-terawatt systems operating at high pulse repetition rate with relatively low pulse energy. The highest pulse energies and highest absolute powers are being generated by the adaptation of larger-scale high energy laser systems operating in single pulse mode. The maximum focused intensity from either type of laser is determined by the beam brightness B which can be expressed in units of Watts cm where P is the power, lambda the wavelength and S the Strehl ratio, quantifying the ratio of brightness in a beam with less than diffraction limited quality to that in a diffraction limited beam

Overview of the Development of the Solar Electric Propulsion Technology Demonstration Mission 12.5-kW Hall Thruster

NASA is developing mission concepts for a solar electric propulsion technology demonstration mission. A number of mission concepts are being evaluated including ambitious missions to near Earth objects. The demonstration of a high-power solar electric propulsion capability is one of the objectives of the candidate missions under consideration. In support of NASA's exploration goals, a number of projects are developing extensible technologies to support NASA's near and long term mission needs. Specifically, the Space Technology Mission Directorate Solar Electric Propulsion Technology Demonstration Mission project is funding the development of a 12.5-kilowatt magnetically shielded Hall thruster system to support future NASA missions. This paper presents the design attributes of the thruster that was collaboratively developed by the NASA Glenn Research Center and the Jet Propulsion Laboratory. The paper provides an overview of the magnetic, plasma, thermal, and structural modeling activities that were carried out in support of the thruster design. The paper also summarizes the results of the functional tests that have been carried out to date. The planned thruster performance, plasma diagnostics (internal and in the plume), thermal, wear, and mechanical tests are outlined