Medical-grade honey does not reduce skin colonization at central venous catheter-insertion sites of critically ill patients: A randomized controlled trial

Introduction: Catheter-related bloodstream infections (CRBSIs) associated with short-term central venous catheters (CVCs) in intensive care unit (ICU) patients are a major clinical problem. Bacterial colonization of the skin at the CVC insertion site is an important etiologic factor for CRBSI. The aim of this study was to assess the efficacy of medical-grade honey in reducing bacterial skin colonization at insertion sites.Methods: A prospective, single-center, open-label randomized controlled trial was performed at the ICU of a university hospital in The Netherlands to assess the efficacy of medical-grade honey to reduce skin colonization of insertion sites. Medical-grade honey was applied in addition to standard CVC-site dressing and disinfection with 0.5% chlorhexidine in 70% alcohol. Skin colonization was assessed on a daily basis before CVC-site disinfection. The primary end point was colonization of insertion sites with >100 colony-forming units at the last sampling before removal of the CVC or transfer of the patient from the ICU. Secondary end points were quantitative levels of colonization of the insertion sites and colonization of insertion sites stratified for CVC location.Results: Colonization of insertion sites was not affected by the use of medical-grade honey, as 44 (34%) of 129 and 36 (34%) of 106 patients in the honey and standard care groups, respectively, had a positive skin culture (P = 0.98). Median levels of skin colonization at the last sampling were 1 (0 to 2.84) and 1 (0 to 2.70) log colony-forming units (CFUs)/swab for the honey and control groups, respectively (P = 0.94). Gender, days of CVC placement, CVC location, and CVC type were predictive for a positive skin culture. Correction for these variables did not change the effect of honey on skin-culture positivity.Conclusions: Medical-grade honey does not affect colonization of the skin at CVC insertion sites in ICU patients when applied in addition to standard disinfection with 0.5% chlorhexidine in 70% alcohol.Trial registration: Netherlands Trial Registry, NTR1652

Analysis of a plasma torch

The phys. behavior of a plasma torch is described by a set of 5 equations with 5 variables. These equations make it possible to calc. the characteristic quantities of the plasma flow; i.e., degree of ionization, velocity, d., temp., and enthalpy. The equations are solved graphically. For comparison, the values as found by a computer are also given. A complete energy balance shows the distribution of the supplied elec. energy over the various components of the plasma and the cooling water. A relatively simple expt. to det. the speed of exhaust of the plasma illustrates the reliability of the calcns. These results can be applied to practical spraying processe

A cross-sectional study of lung function and respiratory symptoms among chemical workers producing diacetyl for food flavourings.

OBJECTIVES: Four diacetyl workers were found to have bronchiolitis obliterans syndrome. Exposures, respiratory symptoms, lung function and exposure-response relationships were investigated. METHODS: 175 workers from a plant producing diacetyl between 1960 and 2003 were investigated. Exposure data were used to model diacetyl exposure. Lung function and questionnaire data on respiratory symptoms were compared to a general population sample and respiratory symptoms to an internal reference group. RESULTS: Workers were potentially exposed to acetoin, diacetyl, acetaldehyde and acetic acid. Historic diacetyl exposure ranged from 1.8 to 351 mg/m(3), and from 3 to 396 mg/m(3) for specific tasks. Diacetyl workers reported significantly more respiratory symptoms compared to the general population sample (continuous trouble with breathing (prevalence ratio (PR) = 2.6; 95% CI 1.3 to 5.1), daily cough (PR = 1.5; 95% CI 1.1 to 2.1), asthma attack (ever) (PR = 2.0; 95% CI 1.2 to 3.4), doctor diagnosed asthma (PR = 2.2; 95% CI 1.3 to 3.8) and asthma attack in the last year (PR = 4.7; 95% CI 1.9 to 11.4)) and to a minimally exposed internal reference group (ever trouble with breathing (PR = 2.8; 95% CI 1.1 to 7.0) and work-related shortness of breath in the last year (PR = 7.5; 95% CI 1.1 to 52.9)). Lung function did not differ between groups. A positive relationship between exposure and FEV(1) was found. CONCLUSION: The excess of respiratory symptoms in this retrospective cohort suggests that diacetyl production poses an occupational hazard. Limited historical exposure data did not support a quantitative individual diacetyl exposure-response relationship, but our findings suggest that preventive measures are prudent

A cross-sectional study of exposures, lung function and respiratory symptoms among aluminium cast-house workers

Objectives To investigate exposures, respiratory symptoms, lung function and exposure-response relationships among aluminium cast-house workers. Methods A cross-sectional study was conducted among 182 workers. Exposure data were used to model exposure to irritants. Lung function and questionnaire data on respiratory symptoms were compared to a general population sample and an internal reference group. Blood samples were taken from 156 workers to examine total IgE, eosinophils and sensitisation to common allergens. Results Average daily mean exposure to inhalable dust, metals, hydrogen fluoride, fluoride salts and sulphur dioxide was relatively low compared to reference values. Airflow patterns in the hall were disturbed regularly and resulted in pot emissions with high concentrations of fluorides. Peak exposures to chlorine gas occurred intermittently due to production process disturbances. Workers reported significantly more respiratory symptoms (continuous trouble with breathing (prevalence ratio (PR) 2.5; 95% CI 1.2 to 5.3), repeated trouble with breathing (PR 1.8; 95% CI 1.1 to 3.0), wheezing (PR 1.4; 95% CI 1.1 to 1.8), asthma attack (ever) (PR 2.8; 95% CI 1.7 to 4.6) and doctor diagnosed asthma (PR 2.6; 95% CI 1.5 to 4.4). Regression analysis showed significantly lower FEV(1) values (-195 ml) and FVC values (-142 ml) compared to a general population sample. Lung function did not differ between groups. Conclusion This epidemiological study suggests cast-house workers in the aluminium industry are exposed to respiratory hazards. Exposure-response relationships could not be demonstrated but this study supports preventive measures in the work environment with a focus on (peak) exposures to irritants