1,152 research outputs found
Synchronization of OFDM at low SNR over an AWGN channel
This paper is based on Extended Symbol OFDM (ES-OFDM) where symbols are extended in time. This way ES-OFDM can operate at low SNR. Each doubling of the symbol length improves the SNR performance by 3 dB in case of a coherent receiver. One of the basic questions is how to synchronize to signals far below the noise floor. An algorithm is presented which is based on the transmission of pilot symbols. At the receiver, the received signal is cross correlated with the known pilot symbol and the maximum magnitude is determined. The position of the maximum value within the cross correlation function indicates the time difference between transmitter and receiver. The performance of the algorithm in case of an Additive White Gaussian Noise (AWGN) channel, is assessed based on a theoretical approximation of the probability of correct detection of the time difference. The theoretical approximation matches with simulation results and shows that synchronization can be achieved for low (negative) SNRs
Adaptive OFDM System Design For Cognitive Radio
Recently, Cognitive Radio has been proposed as a promising technology to improve spectrum utilization. A highly flexible OFDM system is considered to be a good candidate for the Cognitive Radio baseband processing where individual carriers can be switched off for frequencies occupied by a licensed user. In order to support such an adaptive OFDM system, we propose a Multiprocessor System-on-Chip (MPSoC) architecture which can be dynamically reconfigured. However, the complexity and flexibility of the baseband processing makes the MPSoC design a difficult task. This paper presents a design technology for mapping flexible OFDM baseband for Cognitive Radio on a multiprocessor System-on-Chip (MPSoC)
Design optimization applied in structural dynamics
This paper introduces the design optimization strategies, especially for structures which have dynamic constraints. Design optimization involves first the modeling and then the optimization of the problem. Utilizing the Finite Element (FE) model of a structure directly in an optimization process requires a long computation time. Therefore the Backpropagation Neural Networks (NNs) are introduced as a so called surrogate model for the FE model. Optimization techniques mentioned in this study cover the Genetic Algorithm (GA) and the Sequential Quadratic Programming (SQP) methods. For the applications of the introduced techniques, a multisegment cantilever beam problem under the constraints of its first and second natural frequency has been selected and solved using four different approaches
Bound states in two spatial dimensions in the non-central case
We derive a bound on the total number of negative energy bound states in a
potential in two spatial dimensions by using an adaptation of the Schwinger
method to derive the Birman-Schwinger bound in three dimensions. Specifically,
counting the number of bound states in a potential gV for g=1 is replaced by
counting the number of g_i's for which zero energy bound states exist, and then
the kernel of the integral equation for the zero-energy wave functon is
symmetrized. One of the keys of the solution is the replacement of an
inhomogeneous integral equation by a homogeneous integral equation.Comment: Work supported in part by the U.S. Department of Energy under Grant
No. DE-FG02-84-ER4015
Near field phased array DOA and range estimation of UHF RFID tags
This paper presents a near field localization system based on a phased array for UHF RFID tags. To estimate angle and range the system uses a two-dimensional MUSIC algorithm. A four channel phased array is used to experimentally verify the estimation of angle and range for an EPC gen2 tag. The system is calibrated for phase offsets introduced by hardware as simulations show the sensitivity to these offsets. Experiments with this calibrated receiver array give inaccurate ranging estimates. A solution is to calibrate the system for every angle, allowing meaningful range estimates. Experiments in a different environment show a reduced result, indicating the need for extensive calibration
The Chameleon Architecture for Streaming DSP Applications
We focus on architectures for streaming DSP applications such as wireless baseband processing and image processing. We aim at a single generic architecture that is capable of dealing with different DSP applications. This architecture has to be energy efficient and fault tolerant. We introduce a heterogeneous tiled architecture and present the details of a domain-specific reconfigurable tile processor called Montium. This reconfigurable processor has a small footprint (1.8 mm in a 130 nm process), is power efficient and exploits the locality of reference principle. Reconfiguring the device is very fast, for example, loading the coefficients for a 200 tap FIR filter is done within 80 clock cycles. The tiles on the tiled architecture are connected to a Network-on-Chip (NoC) via a network interface (NI). Two NoCs have been developed: a packet-switched and a circuit-switched version. Both provide two types of services: guaranteed throughput (GT) and best effort (BE). For both NoCs estimates of power consumption are presented. The NI synchronizes data transfers, configures and starts/stops the tile processor. For dynamically mapping applications onto the tiled architecture, we introduce a run-time mapping tool
A CMOS spectrum analyzer frontend for cognitive radio achieving +25dBm IIP3 and −169 dBm/Hz DANL
A dual RF-receiver preceded by discrete-step attenuators is implemented in 65nm CMOS and operates from 0.3– 1.0 GHz. The noise of the receivers is reduced by cross-correlating the two receiver outputs in the digital baseband, allowing attenuation of the RF input signal to increase linearity. With this technique a displayed average noise level below -169 dBm/Hz is obtained with +25 dBm IIP3, giving a spurious-free dynamic range of 89 dB in 1 MHz resolution bandwidth
Identity and Paternity Testing of Cattle:Application of a Deoxyribonucleic Acid Profiling Protocol
We have applied DNA profiling for identity and parentage studies of cattle using a standardized procedure based on synthetic micro- and minisatellite multilocus core probes in Southern blot hybridization assays. This protocol is useful for paternity analysis of cattle and for real case work (e.g., identity and paternity disputes).</p
- …