777 research outputs found
Overheating threshold and its effect on time–temperature-transformation diagrams of zirconium based bulk metallic glasses
A pronounced effect of overheating is observed on the crystallization behavior for the three zirconium-based bulk metallic glasses: Zr41.2Ti13.8Cu12.5Ni10Be22.5, Zr57Cu15.4Ni12.6Al10Nb5, and Zr52.5Cu17.9Ni14.6Al10Ti5. A threshold overheating temperature is found for each of the three alloys, above which there is a drastic increase in the undercooling level and the crystallization times. Time–temperature-transformation (TTT) diagrams were measured for the three alloys by overheating above their respective threshold temperatures. The TTT curves for Zr41.2Ti13.8Cu12.5Ni10Be22.5 and Zr57Cu15.4Ni12.6Al10Nb5 are very similar in shape and scale with their respective glass transition temperatures, suggesting that system-specific properties do not play a crucial role in defining crystallization kinetics in these alloys. The critical cooling rates to vitrify the alloys as determined from the TTT curves are about 2 K/s for Zr41.2Ti13.8Cu12.5Ni10Be22.5 and 10 K/s for Zr57Cu15.4Ni12.6Al10Nb5. The measurements were conducted in a high-vacuum electrostatic levitator
Experimental determination of a time–temperature-transformation diagram of the undercooled Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 alloy using the containerless electrostatic levitation processing technique
High temperature high vacuum electrostatic levitation was used to determine the complete time–temperature–transformation (TTT) diagram of the Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 bulk metallic glass forming alloy in the undercooled liquid state. This is the first report of experimental data on the crystallization kinetics of a metallic system covering the entire temperature range of the undercooled melt down to the glass transition temperature. The measured TTT diagram exhibits the expected "C" shape. Existing models that assume polymorphic crystallization cannot satisfactorily explain the experimentally obtained TTT diagram. This originates from the complex crystallization mechanisms that occur in this bulk glass-forming system, involving large composition fluctuations prior to crystallization as well as phase separation in the undercooled liquid state below 800 K
Metallic glass formation in highly undercooled Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 during containerless electrostatic levitation processing
Various sample sizes of Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 with masses up to 80 mg were undercooled below Tg (the glass transition temperature) while electrostatically levitated. The final solidification product of the sample was determined by x-ray diffraction to have an amorphous phase. Differential scanning calorimetry was used to confirm the absence of crystallinity in the processes sample. The amorphous phase could be formed only after heating the samples above the melting temperature for extended periods of time in order to break down and dissolve oxides or other contaminants which would otherwise initiate heterogeneous nucleation of crystals. Noncontact pyrometry was used to monitor the sample temperature throughout processing. The critical cooling rate required to avoid crystallization during solidification of the Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 alloy fell between 0.9 and 1.2 K/s
Overheating threshold and its effect on time–temperature-transformation diagrams of zirconium based bulk metallic glasses
A pronounced effect of overheating is observed on the crystallization behavior for the three zirconium-based bulk metallic glasses: Zr41.2Ti13.8Cu12.5Ni10Be22.5, Zr57Cu15.4Ni12.6Al10Nb5, and Zr52.5Cu17.9Ni14.6Al10Ti5. A threshold overheating temperature is found for each of the three alloys, above which there is a drastic increase in the undercooling level and the crystallization times. Time–temperature-transformation (TTT) diagrams were measured for the three alloys by overheating above their respective threshold temperatures. The TTT curves for Zr41.2Ti13.8Cu12.5Ni10Be22.5 and Zr57Cu15.4Ni12.6Al10Nb5 are very similar in shape and scale with their respective glass transition temperatures, suggesting that system-specific properties do not play a crucial role in defining crystallization kinetics in these alloys. The critical cooling rates to vitrify the alloys as determined from the TTT curves are about 2 K/s for Zr41.2Ti13.8Cu12.5Ni10Be22.5 and 10 K/s for Zr57Cu15.4Ni12.6Al10Nb5. The measurements were conducted in a high-vacuum electrostatic levitator
Hemispherical total emissivity and specific heat capacity of deeply undercooled Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 melts
High-temperature high-vacuum electrostatic levitation (HTHVESL) and differential scanning calorimetry (DSC) were combined to determine the hemispherical total emissivity epsilon T, and the specific heat capacity cp, of the undercooled liquid and throughout the glass transition of the Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 bulk metallic glass forming alloy. The ratio of cp/epsilon T as a function of undercooling was determining from radiative cooling curves measured in the HTHVESL. Using specific heat capacity data obtained by DSC investigations close to the glass transition and above the melting point, epsilon T and cp were separated and the specific heat capacity of the whole undercooled liquid region was determined. Furthermore, the hemispherical total emissivity of the liquid was found to be about 0.22 at 980 K. On undercooling the liquid, the emissivity decreases to approximately 0.18 at about 670 K, where the undercooled liquid starts to freeze to a glass. No significant changes of the emissivity are observed as the alloy undergoes the glass transition
Thermophysical and elastic properties of Cu50Zr50 and (Cu50Zr50)95Al5 bulk-metallic-glass-forming alloys
By employing a containerless high-temperature high-vacuum electrostatic levitation technique, the thermophysical properties, including the ratio between the specific heat capacity and the hemispherical total emissivity, the specific volume, and the viscosity, of Cu50Zr50 and (Cu50Zr50)95Al5 bulk-metallic-glass (BMG)-forming liquids have been measured. Compared with Cu50Zr50, the improved glass-forming ability of (Cu50Zr50)95Al5 can be attributed to its dense liquid structure and its high value of viscosity. Additionally, the relationship between the viscosity of various BMG forming liquids at the melting temperature and the elastic properties of the corresponding glasses at room temperature will be compared
Overheating threshold and its effect on time–temperature-transformation diagrams of zirconium based bulk metallic glasses
- …