3,128 research outputs found
Trapped-Atom-Interferometer in a Magnetic Microtrap
We propose a configuration of a magnetic microtrap which can be used as an
interferometer for three-dimensionally trapped atoms. The interferometer is
realized via a dynamic splitting potential that transforms from a single well
into two separate wells and back. The ports of the interferometer are
neighboring vibrational states in the single well potential. We present a
one-dimensional model of this interferometer and compute the probability of
unwanted vibrational excitations for a realistic magnetic potential. We
optimize the speed of the splitting process in order suppress these excitations
and conclude that such interferometer device should be feasible with currently
available microtrap technique.Comment: 6 pages, 6 figures, submitted to PR
Through-membrane electron-beam lithography for ultrathin membrane applications
We present a technique to fabricate ultrathin (down to 20 nm) uniform
electron transparent windows at dedicated locations in a SiN membrane for in
situ transmission electron microscopy experiments. An electron-beam (e-beam)
resist is spray-coated on the backside of the membrane in a KOH- etched cavity
in silicon which is patterned using through-membrane electron-beam lithography.
This is a controlled way to make transparent windows in membranes, whilst the
topside of the membrane remains undamaged and retains its flatness. Our
approach was optimized for MEMS-based heating chips but can be applied to any
chip design. We show two different applications of this technique for (1)
fabrication of a nanogap electrode by means of electromigration in thin
free-standing metal films and (2) making low-noise graphene nanopore devices
Novel Ferromagnetic Atom Waveguide with in situ loading
Magneto-optic and magnetostatic trapping is realized near a surface using
current carrying coils wrapped around magnetizable cores. A cloud of 10^7
Cesium atoms is created with currents less than 50 mA. Ramping up the current
while maintaining optical dissipation leads to tightly confined atom clouds
with an aspect ratio of 1:1000. We study the 3D character of the magnetic
potential and characterize atom number and density as a function of the applied
current. The field gradient in the transverse dimension has been varied from <
10 G/cm to > 1 kG/cm. By loading and cooling atoms in-situ, we have eliminated
the problem of coupling from a MOT into a smaller phase space.Comment: 4 pages, 4 figure
Mean-field calculations of quasi-elastic responses in 4He
We present calculations of the quasi-elastic responses functions in 4He based
upon a mean-field model used to perform analogous calculations in heavier
nuclei. The meson exchange current contribution is small if compared with the
results of calculations where short-range correlations are explicitly
considered. It is argued that the presence of these correlations in the
description of the nuclear wave functions is crucial to make meson exchange
current effects appreciable.Comment: uuencoded file containing 7 LaTex peges plus 3 ps figures. To be
published in Physical Review
Propagation of Bose-Einstein condensates in a magnetic waveguide
Gaseous Bose-Einstein condensates of 2-3 million atoms were loaded into a
microfabricated magnetic trap using optical tweezers. Subsequently, the
condensates were released into a magnetic waveguide and propagated 12 mm.
Single-mode propagation was observed along homogeneous segments of the
waveguide. Inhomogeneities in the guiding potential arose from geometric
deformations of the microfabricated wires and caused strong transverse
excitations. Such deformations may restrict the waveguide physics that can be
explored with propagating condensates.Comment: 5 pages, 4 figure
Interference effects in electronic transport through metallic single-wall carbon nanotubes
In a recent paper Liang {\it et al.} [Nature {\bf 411}, 665 (2001)] showed
experimentally, that metallic nanotubes, strongly coupled to external
electrodes, may act as coherent molecular waveguides for electronic transport.
The experimental results were supported by theoretical analysis based on the
scattering matrix approach. In this paper we analyze theoretically this problem
using a real-space approach, which makes it possible to control quality of
interface contacts. Electronic structure of the nanotube is taken into account
within the tight-binding model. External electrodes and the central part
(sample) are assumed to be made of carbon nanotubes, while the contacts between
electrodes and the sample are modeled by appropriate on-site (diagonal) and
hopping (off-diagonal) parameters. Conductance is calculated by the Green
function technique combined with the Landauer formalism. In the plots
displaying conductance {\it vs.} bias and gate voltages, we have found typical
diamond structure patterns, similar to those observed experimentally. In
certain cases, however, we have found new features in the patterns, like a
double-diamond sub-structure.Comment: 15 pages, 4 figures. To apear in Phys. Rev.
Generalized Uncertainty Relations and Long Time Limits for Quantum Brownian Motion Models
We study the time evolution of the reduced Wigner function for a class of
quantum Brownian motion models. We derive two generalized uncertainty
relations. The first consists of a sharp lower bound on the uncertainty
function, , after evolution for time in the
presence of an environment. The second, a stronger and simpler result, consists
of a lower bound at time on a modified uncertainty function, essentially
the area enclosed by the contour of the Wigner function. In both
cases the minimizing initial state is a non-minimal Gaussian pure state. These
generalized uncertainty relations supply a measure of the comparative size of
quantum and thermal fluctuations. We prove two simple inequalites, relating
uncertainty to von Neumann entropy, and the von Neumann entropy to linear
entropy. We also prove some results on the long-time limit of the Wigner
function for arbitrary initial states. For the harmonic oscillator the Wigner
function for all initial states becomes a Gaussian at large times (often, but
not always, a thermal state). We derive the explicit forms of the long-time
limit for the free particle (which does not in general go to a Gaussian), and
also for more general potentials in the approximation of high temperature.Comment: 35 pages (plain Tex, revised to avoid corruption during file
transmission), Imperial College preprint 92-93/25 (1994
Negative differential resistance in nanotube devices
Carbon nanotube junctions are predicted to exhibit negative differential
resistance, with very high peak-to-valley current ratios even at room
temperature. We treat both nanotube p-n junctions and undoped
metal-nanotube-metal junctions, calculating quantum transport through the
self-consistent potential within a tight-binding approximation. The undoped
junctions in particular may be suitable for device integration.Comment: 4 pages, 4 figures, to appear in Physical Review Letter
Are consumers satisfied with the use of prosthetic sports feet and the provision process?:A mixed-methods study
BACKGROUND: Special feet connected to a prosthesis, prosthetic sports feet, enable athletes with a lower limb amputation to run. The selection of a prosthetic sports feet is usually based on body weight and preferred sports performance. The selection of a prosthetic sport feet is also based on clinicians who likely have limited experience due to a small number of athletes with a lower limb amputation. HYPOTHESIS: Athletes with a lower limb amputation are not satisfied with the use and service associated with prosthetic sports feet due to a lack of prosthetic sports feet provision guidelines, poorer function of prosthetic sports feet compared to the anatomical foot and ankle, and limited experience of clinicians. EVALUATION OF HYPOTHESIS: A mixed-methods study in 16 athletes with a lower limb amputation using a prosthetic sport foot from Össur or Otto Bock, included semi-structured interviews and quantitative analysis. Three dimensions of prosthetic sports feet were investigated: 1) use, 2) provision process, and 3) cosmetics. Qualitative data were analyzed to identify factors influencing consumer satisfaction. Quantitative data were analyzed to investigate satisfaction and perceived relative importance of the dimensions. RESULTS: Participants were satisfied with the prosthetic sports feet use. However, they were not satisfied with the process prior to provision. The prosthetic sport feet use was perceived as the most important dimension. Sports performance was the critical element in the prosthetic sports feet use and was influenced by stability, confidence and fear, safety, focus, energy return, and comfort. Cosmetics were unimportant. Motivation to purchase the prosthetic sports feet was the key element for the prosthetic sports foot acquisition. Satisfaction about the process prior to provision was negatively influenced by poor support of professionals during rehabilitation, the complexity and duration of the purchase process, and lack of information and accessibility of prosthetic sports feet. CONCLUSION: The most important dimension of the prosthetic sports feet was its use, which was directly influenced by performance. To further increase the satisfaction with prosthetic sports feet, clinicians should establish how to meet the desired sports performance level of athletes with a lower limb amputation. Improving the process prior to the provision process may increase satisfaction. We suggest increasing the support of professionals during rehabilitation and training through cooperation between involved services, organizing prosthetic sports feet try-out sessions, and increase the accessibility of the prosthetic sports feet. In this way, individuals with a lower limb amputation may become and stay more physically active and participate in sports
A Storage Ring for Neutral Atoms
We have demonstrated a storage ring for ultra-cold neutral atoms. Atoms with
mean velocities of 1 m/s corresponding to kinetic energies of ~100 neV are
confined to a 2 cm diameter ring by magnetic forces produced by two
current-carrying wires. Up to 10^6 atoms are loaded at a time in the ring, and
7 revolutions are clearly observed. Additionally, we have demonstrated multiple
loading of the ring and deterministic manipulation of the longitudinal velocity
distribution of the atoms using applied laser pulses. Applications of this ring
include large area atom interferometers and cw monochromatic atomic beam
generation.Comment: 4 pages, 5 figure
- …