Test of the ALICE DDL: Test setups and Test of ALICE DDL Integration to ALICE TPC test system

Presentation made at the 4th Workshop on Electronics for LHC Experiments, INFN Rome, 21-25 September 1998.The Detector Data Link (DDL) has been developed to constitute a standard interface between the ALICE sub-detectors and the DAQ system.In this paper we present the test environment and the application software library made for supporting the DDL development and its integration into the ALICE detector system. The test setups contain VME64 crates, MVME processor cards, a VMETRO analyser, a logic-analyser and Read-out-Receiver (RORC) andDestination-Interface-Unit (DIU) cards. They made possible to measure the maximum throughput of the full read-out chain and also to measurethe transmission latencies. They support the functional and long-term stability tests as well

PCI Based Read-out Receiver Card in the ALICE DAQ System

The Detector Data Link (DDL) is the high-speed optical link for the ALICE experiment. This link shall transfer the data coming from the detectors at 100 MB/s rate. The main components of the link have been developed: the destination Interface Unit (DIU), the Source Interface Unit (SIU) and the Read-out Receiver Card (RORC). The first RORC version is based on the VME bus. The performance tests show that the maximum VME bandwidth could be reached. Meanwhile the PCI bus became very popular and is used in many platforms. The development of a PCI-based version has been started. The document describes the prototype version in three sections. An overview explains the main purpose of the card: to provide an interface between the DDL and the PCI bus. Acting as a 32bit/33MHz PCI master the card is able to write or read directly to or from the system memory from or to the DDL, respectively. Beside these functions the card can also be used as an autonomous data generator. The card has been designed to be well adapted to applications, which require small software overhead such the high-speed data acquisition systems. The implementation of the firmware will be presented. For the logic design we are using VHDL and schematic draw. Software library routines were written in C and are available on Linux OS. The results of performance measurements will be available to allow the comparison between the VME-RORC and PCI-RORC. In the conclusion the future plans and the idea of the improved (64bit/66MHz) PCI-RORC will be shown

The ALICE detector data link

The ALICE detector data link has been designed to cover all the needs for data transfer between the detector and the data-acquisition system. It is a 1 Gbit/s, full-duplex, multi-purpose fibre optic link that can be used as a medium for the bi-directional transmission of data blocks between the front-end electronics and the data- acquisition system and also for the remote control and test of the front-end electronics, In this paper the concept, the protocol, the specific test tools, the prototypes of the detector data link and the read-out receiver card, their application in the ALICE-TPC test system and the integration with the DATE software are presented. The test results on the performance are also shown. (14 refs)

The ALICE DAQ: Current Status and Future Challenges

Proposal of abstract for CHEP2000The ALICE DAQ system has been designed to support an aggregate eventr building bandwidth of up to 2.5 GByte/s and a storage capability o fup to 1.25 GByte/s to mass storage.A general framework called the ALICE Data Acquisition Test Environment (DATE) system has been developed as a basis for prototyping the components of the DAQ. DATE supports a wide spectrum of configurations from simple systems to more complex systems with multiple detectors and multiple event builders.Prototypes of several key components of the ALICE DAQ have been developed and integrated with the DATE system, such as the ALICE Detector Data Link, the online data monitoring from ROOT and the interface to the Mass Storage systems. Combined tests of several of these components are pursued during the ALICE Data Challenges.The architecture of the ALICE DAQ system will be presented together with the current status of the different prototypes. The recent addition of a Transition Radiation Detector (TRD) to ALICE has required a revision of the requirements and the architecture of the DAQ. This will allow a higher level of data selection. These new opportunities and implementation challenges will also be presented

ALICE: Physics Performance Report, Volume I

ALICE is a general-purpose heavy-ion experiment designed to study the physics of strongly interacting matter and the quark-gluon plasma in nucleus-nucleus collisions at the LHC. It currently includes more than 900 physicists and senior engineers, from both nuclear and high-energy physics, from about 80 institutions in 28 countries. The experiment was approved in February 1997. The detailed design of the different detector systems has been laid down in a number of Technical Design Reports issued between mid-1998 and the end of 2001 and construction has started for most detectors. Since the last comprehensive information on detector and physics performance was published in the ALICE Technical Proposal in 1996, the detector as well as simulation, reconstruction and analysis software have undergone significant development. The Physics Performance Report (PPR) will give an updated and comprehensive summary of the current status and performance of the various ALICE subsystems, including updates to the Technical Design Reports, where appropriate, as well as a description of systems which have not been published in a Technical Design Report. The PPR will be published in two volumes. The current Volume I contains: 1. a short theoretical overview and an extensive reference list concerning the physics topics of interest to ALICE, 2. relevant experimental conditions at the LHC, 3. a short summary and update of the subsystem designs, and 4. a description of the offline framework and Monte Carlo generators. Volume II, which will be published separately, will contain detailed simulations of combined detector performance, event reconstruction, and analysis of a representative sample of relevant physics observables from global event characteristics to hard processes

Status Report on the ALICE Prototype TPC with Ring-Cathode Readout

o a single ASIC, thus allowing later on-detector installation. For the transfer of the data a newly developed full duplex optical data link was used. Details of the detector design, construction and readout are presented together with results from bench and beam tests. </HTML