Growth, Characterization, and Electrochemical Properties of Doped n-Type KTaO_3 Photoanodes

The effects of compositionally induced changes on the semiconducting properties, optical response, chemical stability, and overall performance of KTaO_3 photoanodes in photoelectrochemical (PEC) cells have been investigated. Single crystals of n-type Ca- and Ba-doped KTaO_3 with carrier concentrations ranging from 0.45 to 11.5×10^(19) cm^(−3) were grown and characterized as photoanodes in basic aqueous electrolyte PEC cells. The PEC properties of the crystals, including the photocurrent, photovoltage, and flatband potential in contact with 8.5 M NaOH(aq) were relatively independent of whether Ca or Ba was used to produce the semiconducting form of KTaO_3. All of the Ca- or Ba-doped KTaO_3 single-crystal photoanodes were chemically stable in the electrolyte and, based on the open-circuit potential and the band-edge positions, were capable of unassisted photochemical H_2 and O_2 evolution from H_2O. The minority-carrier diffusion lengths values were small and comparable to the depletion region width. Photoanodic currents were only observed for photoanode illumination with light above the bandgap (i.e., λ<340 nm). The maximum external quantum yield occurred at λ=255 nm (4.85 eV), and the depletion width plus the minority-carrier diffusion length ranged from 20 to 65 nm for the various KTaO_3-based photoanode materials

Towards a reliable laser spray powder deposition system through process characterization

A series of experiments have been performed to characterize the laser spray powder deposition tea-one (HAZ) in the process. Goal of these experiments was to minimize the heat affected base substrate while obtaining a maximum build-up rate of the deposited material. Response surface models have been developed to achieve this goal. These models indicate that laser irradiance and component travel speed are both important factors to be considered in optimization of this process. These models suggest that a minimum HAZ can be obtained with a maximum material build-up height by maintaining with a slow travel speed. Although these models are useful in identifying significant factor and process trends, further refinement is required for practical use in industrial applications. Weighting of the response variables used in generating the models is being considered to improve the model robustness. High speed imaging of the deposition process suggests that the powder particle size and/or size distribution affects the stability of this process

Diversity of Francisella Species in Environmental Samples from Martha’s Vineyard, Massachusetts

We determined whether Francisella spp. are present in water, sediment, and soil from an active tularemia natural focus on Martha’s Vineyard, Massachusetts, during a multiyear outbreak of pneumonic tularemia. Environmental samples were tested by polymerase chain reaction (PCR) targeting Francisella species 16S rRNA gene and succinate dehydrogenase A (sdhA) sequences; evidence of the agent of tularemia was sought by amplification of Francisella tularensis-specific sequences for the insertion element ISFTu2, 17-kDa protein gene tul4, and the 43-kDa outer membrane protein gene fopA. Evidence of F. tularensis subsp. tularensis, the causative agent of the human infections in this outbreak, was not detected from environmental samples despite its active transmission among ticks and animals in the sampling site. Francisella philomiragia was frequently detected from a brackish-water pond using Francisella species PCR targets, and subsequently F. philomiragia was isolated from an individual brackish-water sample. Distinct Francisella sp. sequences that are closely related to F. tularensis and Francisella novicida were detected from samples collected from the brackish-water pond. We conclude that diverse Francisella spp. are present in the environment where human cases of pneumonic tularemia occur

Proximity induced metal/insulator transition in YBa2Cu3O7/La2/3Ca1/3MnO3Y Ba_2 Cu_3 O_7 / La_{2/3} Ca_{1/3} Mn O_3 superlattices

The far-infrared dielectric response of superlattices (SL) composed of superconducting YBa$_{2}$Cu$_{3}$O$_{7}$ (YBCO) and ferromagnetic La$_{0.67}$% Ca$_{0.33}$MnO$_{3}$ (LCMO) has been investigated by ellipsometry. A drastic decrease of the free carrier response is observed which involves an unusually large length scale of d$^{crit}\approx$20 nm in YBCO and d$^{crit}\approx$10 nm in LCMO. A corresponding suppression of metallicity is not observed in SLs where LCMO is replaced by the paramagnetic metal LaNiO$_{3}$. Our data suggest that either a long range charge transfer from the YBCO to the LCMO layers or alternatively a strong coupling of the charge carriers to the different and competitive kind of magnetic correlations in the LCMO and YBCO layers are at the heart of the observed metal/insulator transition. The low free carrier response observed in the far-infrared dielectric response of the magnetic superconductor RuSr$_{2}$GdCu$_{2}$O$_{8}$ is possibly related to this effect

Optical properties of MgH2 measured in situ in a novel gas cell for ellipsometry/spectrophotometry

The dielectric properties of alpha-MgH2 are investigated in the photon energy range between 1 and 6.5 eV. For this purpose, a novel sample configuration and experimental setup are developed that allow both optical transmission and ellipsometric measurements of a transparent thin film in equilibrium with hydrogen. We show that alpha-MgH2 is a transparent, colour neutral insulator with a band gap of 5.6 +/- 0.1 eV. It has an intrinsic transparency of about 80% over the whole visible spectrum. The dielectric function found in this work confirms very recent band structure calculations using the GW approximation by Alford and Chou [J.A. Alford and M.Y. Chou (unpublished)]. As Pd is used as a cap layer we report also the optical properties of PdHx thin films.Comment: REVTeX4, 15 pages, 12 figures, 5 table

Lignocellulose degradation mechanisms across the Tree of Life.

Organisms use diverse mechanisms involving multiple complementary enzymes, particularly glycoside hydrolases (GHs), to deconstruct lignocellulose. Lytic polysaccharide monooxygenases (LPMOs) produced by bacteria and fungi facilitate deconstruction as does the Fenton chemistry of brown-rot fungi. Lignin depolymerisation is achieved by white-rot fungi and certain bacteria, using peroxidases and laccases. Meta-omics is now revealing the complexity of prokaryotic degradative activity in lignocellulose-rich environments. Protists from termite guts and some oomycetes produce multiple lignocellulolytic enzymes. Lignocellulose-consuming animals secrete some GHs, but most harbour a diverse enzyme-secreting gut microflora in a mutualism that is particularly complex in termites. Shipworms however, house GH-secreting and LPMO-secreting bacteria separate from the site of digestion and the isopod Limnoria relies on endogenous enzymes alone. The omics revolution is identifying many novel enzymes and paradigms for biomass deconstruction, but more emphasis on function is required, particularly for enzyme cocktails, in which LPMOs may play an important role.The work of the teams at York, Portsmouth and Cambridge on development of ideas expressed in this review was supported by grants from BBSRC (BB/H531543/1, BB/L001926/1, BB/1018492/1, BB/K020358/1). The workshop was supported by a US Partnering grant from BBSRC (BB/G016208/1) to Cragg and a BBSRC/FAPESP grant to Bruce (BB/1018492/1). Watts was supported by Marie Curie FP7-RG 276948. Goodell acknowledges support from USDA Hatch Project S-1041 VA-136288. Distel acknowledges support from NSF Award IOS1442759 and NIH Award Number U19 TW008163. Beckham thanks the US Department of Energy Bioenergy Technologies Office for funding. We appreciated the hospitality of the Linnean Society in allowing us to meet in inspirational surroundings under portraits of Linnaeus, Darwin and Wallace.This is the final version of the article. It first appeared from Elsevier via http://dx.doi.org/10.1016/j.cbpa.2015.10.01

Development of a Multilevel Intervention to Increase Colorectal Cancer Screening in Appalachia

Background Colorectal cancer (CRC) screening rates are lower in Appalachian regions of the United States than in non-Appalachian regions. Given the availability of various screening modalities, there is critical need for culturally relevant interventions addressing multiple socioecological levels to reduce the regional CRC burden. In this report, we describe the development and baseline findings from year 1 of “Accelerating Colorectal Cancer Screening through Implementation Science (ACCSIS) in Appalachia,” a 5-year, National Cancer Institute Cancer MoonshotSM-funded multilevel intervention (MLI) project to increase screening in Appalachian Kentucky and Ohio primary care clinics. Methods Project development was theory-driven and included the establishment of both an external Scientific Advisory Board and a Community Advisory Board to provide guidance in conducting formative activities in two Appalachian counties: one in Kentucky and one in Ohio. Activities included identifying and describing the study communities and primary care clinics, selecting appropriate evidence-based interventions (EBIs), and conducting a pilot test of MLI strategies addressing patient, provider, clinic, and community needs. Results Key informant interviews identified multiple barriers to CRC screening, including fear of screening, test results, and financial concerns (patient level); lack of time and competing priorities (provider level); lack of reminder or tracking systems and staff burden (clinic level); and cultural issues, societal norms, and transportation (community level). With this information, investigators then offered clinics a menu of EBIs and strategies to address barriers at each level. Clinics selected individually tailored MLIs, including improvement of patient education materials, provision of provider education (resulting in increased knowledge, p = .003), enhancement of electronic health record (EHR) systems and development of clinic screening protocols, and implementation of community CRC awareness events, all of which promoted stool-based screening (i.e., FIT or FIT-DNA). Variability among clinics, including differences in EHR systems, was the most salient barrier to EBI implementation, particularly in terms of tracking follow-up of positive screening results, whereas the development of clinic-wide screening protocols was found to promote fidelity to EBI components. Conclusions Lessons learned from year 1 included increased recognition of variability among the clinics and how they function, appreciation for clinic staff and provider workload, and development of strategies to utilize EHR systems. These findings necessitated a modification of study design for subsequent years. Trial registration Trial NCT04427527 is registered at https://clinicaltrials.gov and was registered on June 11, 2020

Properties of Graphene: A Theoretical Perspective

In this review, we provide an in-depth description of the physics of monolayer and bilayer graphene from a theorist's perspective. We discuss the physical properties of graphene in an external magnetic field, reflecting the chiral nature of the quasiparticles near the Dirac point with a Landau level at zero energy. We address the unique integer quantum Hall effects, the role of electron correlations, and the recent observation of the fractional quantum Hall effect in the monolayer graphene. The quantum Hall effect in bilayer graphene is fundamentally different from that of a monolayer, reflecting the unique band structure of this system. The theory of transport in the absence of an external magnetic field is discussed in detail, along with the role of disorder studied in various theoretical models. We highlight the differences and similarities between monolayer and bilayer graphene, and focus on thermodynamic properties such as the compressibility, the plasmon spectra, the weak localization correction, quantum Hall effect, and optical properties. Confinement of electrons in graphene is nontrivial due to Klein tunneling. We review various theoretical and experimental studies of quantum confined structures made from graphene. The band structure of graphene nanoribbons and the role of the sublattice symmetry, edge geometry and the size of the nanoribbon on the electronic and magnetic properties are very active areas of research, and a detailed review of these topics is presented. Also, the effects of substrate interactions, adsorbed atoms, lattice defects and doping on the band structure of finite-sized graphene systems are discussed. We also include a brief description of graphane -- gapped material obtained from graphene by attaching hydrogen atoms to each carbon atom in the lattice.Comment: 189 pages. submitted in Advances in Physic