The MOLICEL(R) rechargeable lithium system: Multicell battery aspects

MOLICEL rechargeable lithium cells were cycled in batteries using series, parallel, and series/parallel connections. The individual cell voltages and branch currents were measured to understand the cell interactions. The observations were interpreted in terms of the inherent characteristics of the Li/MoS2 system and in terms of a singular cell failure mode. The results confirm that correctly configured multicell batteries using MOLICELs have performance characteristics comparable to those of single cells

A unified rheological model for cells and cellularised materials.

The mechanical response of single cells and tissues exhibits a broad distribution of time-scales that often gives rise to a distinctive power-law rheology. Such complex behaviour cannot be easily captured by traditional rheological approaches, making material characterisation and predictive modelling very challenging. Here, we present a novel model combining conventional viscoelastic elements with fractional calculus that successfully captures the macroscopic relaxation response of epithelial monolayers. The parameters extracted from the fitting of the relaxation modulus allow prediction of the response of the same material to slow stretch and creep, indicating that the model captured intrinsic material properties. Two characteristic times, derived from the model parameters, delimit different regimes in the materials response. We compared the response of tissues with the behaviour of single cells as well as intra and extra-cellular components, and linked the power-law behaviour of the epithelium to the dynamics of the cell cortex. Such a unified model for the mechanical response of biological materials provides a novel and robust mathematical approach to consistently analyse experimental data and uncover similarities and differences in reported behaviour across experimental methods and research groups. It also sets the foundations for more accurate computational models of tissue mechanics

The dynamic mechanical properties of cellularised aggregates.

Cellularised materials are composed of cells interfaced through specialised intercellular junctions that link the cytoskeleton of one cell to that of its neighbours allowing for transmission of forces. Cellularised materials are common in early development and adult tissues where they can be found in the form of cell sheets, cysts, or amorphous aggregates and in pathophysiological conditions such as cancerous tumours. Given the growing realisation that forces can regulate cell physiology and developmental processes, understanding how cellularised materials deform under mechanical stress or dissipate stress appear as key biological questions. In this review, we will discuss the dynamic mechanical properties of cellularised materials devoid of extracellular matrix

An integrative approach based on probabilistic modelling and statistical inference for morpho-statistical characterization of astronomical data

This paper describes several applications in astronomy and cosmology that are addressed using probabilistic modelling and statistical inference

Tug-of-war between stretching and bending in living cell sheets

The balance between stretching and bending deformations characterizes shape transitions of thin elastic sheets. While stretching dominates the mechanical response in tension, bending dominates in compression after an abrupt buckling transition. Recently, experimental results in suspended living epithelial monolayers have shown that, due to the asymmetry in surface stresses generated by molecular motors across the thickness e of the epithelium, the free edges of such tissues spontaneously curl out-of-plane, stretching the sheet in-plane as a result. This suggests that a competition between bending and stretching sets the morphology of the tissue margin. In this paper, we use the framework of non-Euclidean plates to incorporate active pre-strain and spontaneous curvature to the theory of thin elastic shells. We show that, when the spontaneous curvature of the sheet scales like 1 / e , stretching and bending energies have the same scaling in the limit of a vanishingly small thickness and therefore both compete, in a way that is continuously altered by an external tension, to define the three-dimensional shape of the tissue

MAARS: a novel high-content acquisition software for the analysis of mitotic defects in fission yeast

Faithful segregation of chromosomes during cell division relies on multiple processes such as chromosome attachment and correct spindle positioning. Yet mitotic progression is defined by multiple parameters, which need to be quantitatively evaluated. To study the spatiotemporal control of mitotic progression, we developed a high-content analysis (HCA) approach that combines automated fluorescence microscopy with real-time quantitative image analysis and allows the unbiased acquisition of multiparametric data at the single-cell level for hundreds of cells simultaneously. The Mitotic Analysis and Recording System (MAARS) provides automatic and quantitative single-cell analysis of mitotic progression on an open-source platform. It can be used to analyze specific characteristics such as cell shape, cell size, metaphase/anaphase delays, and mitotic abnormalities including spindle mispositioning, spindle elongation defects, and chromosome segregation defects. Using this HCA approach, we were able to visualize rare and unexpected events of error correction during anaphase in wild-type or mutant cells. Our study illustrates that such an expert system of mitotic progression is able to highlight the complexity of the mechanisms required to prevent chromosome loss during cell division

Stress relaxation in epithelial monolayers is controlled by the actomyosin cortex

Epithelial monolayers are one-cell thick tissue sheets that separate internal and external environments. As part of their function, they have to withstand extrinsic mechanical stresses applied at high strain rates. However, little is known about how monolayers respond to mechanical deformations. Here, by subjecting suspended epithelial monolayers to stretch, we find that they dissipate stresses on a minute time-scale in a process that involves an increase in monolayer length, pointing to active remodelling of cell architecture during relaxation. Strikingly, monolayers consisting of tens of thousands of cells relax stress with similar dynamics to single rounded cells and both respond similarly to perturbations of actomyosin. By contrast, cell-cell junctional complexes and intermediate filaments do not relax tissue stress, but form stable connections between cells, allowing monolayers to behave rheologically as single cells. Taken together our data show that actomyosin dynamics governs the rheological properties of epithelial monolayers, dissipating applied stresses, and enabling changes in monolayer length.Peer ReviewedPostprint (published version

Actomyosin controls planarity and folding of epithelia in response to compression.

Throughout embryonic development and adult life, epithelia are subjected to compressive deformations. While these have been shown to trigger mechanosensitive responses such as cell extrusion and differentiation, which span tens of minutes, little is known about how epithelia adapt to compression over shorter timescales. Here, using suspended epithelia, we uncover the immediate response of epithelial tissues to the application of in-plane compressive strains (5-80%). We show that fast compression induces tissue buckling followed by actomyosin-dependent tissue flattening that erases the buckle within tens of seconds, in both mono- and multi-layered epithelia. Strikingly, we identify a well-defined limit to this response, so that stable folds form in the tissue when compressive strains exceed a 'buckling threshold' of ~35%. A combination of experiment and modelling shows that this behaviour is orchestrated by adaptation of the actomyosin cytoskeleton as it re-establishes tissue tension following compression. Thus, tissue pre-tension allows epithelia to both buffer against deformation and sets their ability to form and retain folds during morphogenesis.T.P.J.W. and N.K. were part of the EPSRC funded doctoral training programme CoMPLEX. J.F. and P.R. were funded by BBSRC grants (nos. BB/M003280 and BB/M002578) to G.T.C. and A.J.K. N.K. was funded by the Rosetrees Trust and the UCL Graduate School through a UCL Overseas Research Scholarship. A.L. was supported by an EMBO long-term post-doctoral fellowship. B.B. was supported by UCL, a BBSRC project grant (no. BB/K009001/1) and a CRUK programme grant (no. 17343). T.P.J.W., J.F., N.K., A.L. and G.T.C. were supported by a consolidator grant from the European Research Council to G.T.C. (MolCellTissMech, agreement no. 647186)

Acoustic radiation force impulse: a new ultrasonographic technology for the widespread noninvasive diagnosis of liver fibrosis:

Background/aims: As a module of a standard ultrasound imaging device, acoustic radiation force impulse (ARFI) is a new technology for liver stiffness evaluation (LSE). We aimed to evaluate accuracy, feasibility, reproducibility, and training effect of ARFI for liver fibrosis evaluation.Methods: One hundred and one patients with chronic liver disease had LSE by Fibroscan and ARFI. LSE by ARFI was performed in the two liver lobes by two operators: an expert and a novice. Correlation and agreement were evaluated by the Pearson (Rp) and intraclass (Ric) correlation coefficients. The independent reference for liver fibrosis was fibrosis blood tests. Results: ARFI results, ranging from 0.7 to 4.6 m/s, were well correlated with Fibroscan results (Rp=0.76). Fibroscan had a significantly higher area under the receiver operating characteristic curve (AUROC) than ARFI for the perprotocol diagnosis of significant fibrosis: 0.890±0.034 versus 0.795±0.047 (P=0.04). However, LSE failure occurred in zero patients using ARFI versus six patients using Fibroscan (P=0.03). Thus, on an intention-to-diagnose basis, Fibroscan and ARFI AUROCs for the diagnosis of significant fibrosis were not different: 0.791±0.049 versus 0.793±0.046 (P=0.98). Interobserver agreement was very good (Ric=0.84) and excellent for ARFI interquartile range (IQR)≤0.30 (Ric=0.91). Indeed, agreement was independently predicted only by ARFI IQR, but not by LSE result as earlier observed for Fibroscan. ARFI AUROC was 0.876±0.057 in patients with ARFI IQR ratio≤0.30, and Fibroscan AUROC was 0.912±0.034 in patients with Fibroscan IQR ratio less than 0.21 (P=0.59). Intersite ARFI agreement between the two liver lobes was fair (Ric=0.60). There was no training effect for LSE by ARFI. Conclusion: ARFI is highly feasible and reproducible, and provides diagnostic accuracy similar to Fibroscan. This new device seems noteworthy for the widespread noninvasive diagnosis of liver fibrosis

Simple blood fibrosis tests reduce unnecessary referrals for specialized evaluations of liver fibrosis in NAFLD and ALD patients

BACKGROUND: Liver fibrosis evaluation is mandatory in non-alcoholic fatty liver disease (NAFLD) and alcoholic liver disease (ALD) to decide the patient management. Patients with these diseases are usually under the care of non-liver specialists who refer them to specialized centers where the most accurate fibrosis tests are available. We aimed to evaluate whether simple blood fibrosis tests available to all physicians help to reduce the rate of unnecessary referral of NAFLD and ALD patients without advanced fibrosis. METHODS: NAFLD and/or ALD patients newly referred to our center for a non-invasive evaluation of liver fibrosis were retrospectively included. The FibroMeter (FM, combination of blood markers and Fibroscan results) was defined as the reference test for specialized evaluation of liver fibrosis. A FM result <0.384 indicated the absence of advanced fibrosis and thus an "unnecessary referral". RESULTS: 558 patients were included (NAFLD: 283, ALD: 156, mixed NAFLD+ALD: 119). FM was <0.384 (unnecessary referral) in 58.8% of patients. FIB4 was <1.30 in 45.2% and eLIFT <8 in 47.7% of the patients. 84.9% of patients with FIB4 <1.30 and 85.3% of patients with eLIFT <8 had also FM <0.384. Therefore, using FIB4 or eLIFT as first-line evaluation of liver fibrosis decreased by three-fold the rate of unnecessary referral. The negative predictive value of FIB4 and eLIFT was >80% whatever the underlying cause of chronic liver disease. CONCLUSION: The use of eLIFT by non-liver specialists for NAFLD and ALD patients can improve the relevance of referrals for specialized evaluation of liver fibrosis