69,439 research outputs found

    Rain water transport and storage in a model sandy soil with hydrogel particle additives

    Full text link
    We study rain water infiltration and drainage in a dry model sandy soil with superabsorbent hydrogel particle additives by measuring the mass of retained water for non-ponding rainfall using a self-built 3D laboratory set-up. In the pure model sandy soil, the retained water curve measurements indicate that instead of a stable horizontal wetting front that grows downward uniformly, a narrow fingered flow forms under the top layer of water-saturated soil. This rain water channelization phenomenon not only further reduces the available rain water in the plant root zone, but also affects the efficiency of soil additives, such as superabsorbent hydrogel particles. Our studies show that the shape of the retained water curve for a soil packing with hydrogel particle additives strongly depends on the location and the concentration of the hydrogel particles in the model sandy soil. By carefully choosing the particle size and distribution methods, we may use the swollen hydrogel particles to modify the soil pore structure, to clog or extend the water channels in sandy soils, or to build water reservoirs in the plant root zone

    Effect of hydrogel particle additives on water-accessible pore structure of sandy soils: A custom pressure plate apparatus and capillary bundle model

    Get PDF
    To probe the effects of hydrogel particle additives on the water-accessible pore structure of sandy soils, we introduce a custom pressure plate method in which the volume of water expelled from a wet granular packing is measured as a function of applied pressure. Using a capillary bundle model, we show that the differential change in retained water per pressure increment is directly related to the cumulative cross-sectional area distribution f(r)f(r) of the water-accessible pores with radii less than rr. This is validated by measurements of water expelled from a model sandy soil composed of 2 mm diameter glass beads. In particular, the expelled water is found to depend dramatically on sample height and that analysis using the capillary bundle model gives the same pore size distribution for all samples. The distribution is found to be approximately log-normal, and the total cross-sectional area fraction of the accessible pore space is found to be f0=0.34f_0=0.34. We then report on how the pore distribution and total water-accessible area fraction are affected by superabsorbent hydrogel particle additives, uniformly mixed into a fixed-height sample at varying concentrations. Under both fixed volume and free swelling conditions, the total area fraction of water-accessible pore space in a packing decreases exponentially as the gel concentration increases. The size distribution of the pores is significantly modified by the swollen hydrogel particles, such that large pores are clogged while small pores are formed

    Existence and Stability of a Spike in the Central Component for a Consumer Chain Model

    Get PDF
    We study a three-component consumer chain model which is based on Schnakenberg type kinetics. In this model there is one consumer feeding on the producer and a second consumer feeding on the first consumer. This means that the first consumer (central component) plays a hybrid role: it acts both as consumer and producer. The model is an extension of the Schnakenberg model suggested in \cite{gm,schn1} for which there is only one producer and one consumer. It is assumed that both the producer and second consumer diffuse much faster than the central component. We construct single spike solutions on an interval for which the profile of the first consumer is that of a spike. The profiles of the producer and the second consumer only vary on a much larger spatial scale due to faster diffusion of these components. It is shown that there exist two different single spike solutions if the feed rates are small enough: a large-amplitude and a small-amplitude spike. We study the stability properties of these solutions in terms of the system parameters. We use a rigorous analysis for the linearized operator around single spike solutions based on nonlocal eigenvalue problems. The following result is established: If the time-relaxation constants for both producer and second consumer vanish, the large-amplitude spike solution is stable and the small-amplitude spike solution is unstable. We also derive results on the stability of solutions when these two time-relaxation constants are small. We show a new effect: if the time-relaxation constant of the second consumer is very small, the large-amplitude spike solution becomes unstable. To the best of our knowledge this phenomenon has not been observed before for the stability of spike patterns. It seems that this behavior is not possible for two-component reaction-diffusion systems but that at least three components are required. Our main motivation to study this system is mathematical since the novel interaction of a spike in the central component with two other components results in new types of conditions for the existence and stability of a spike. This model is realistic if several assumptions are made: (i) cooperation of consumers is prevalent in the system, (ii) the producer and the second consumer diffuse much faster than the first consumer, and (iii) there is practically an unlimited pool of producer. The first assumption has been proven to be correct in many types of consumer groups or populations, the second assumption occurs if the central component has a much smaller mobility than the other two, the third assumption is realistic if the consumers do not feel the impact of the limited amount of producer due to its large quantity. This chain model plays a role in population biology, where consumer and producer are often called predator and prey. This system can also be used as a model for a sequence of irreversible autocatalytic reactions in a container which is in contact with a well-stirred reservoir

    Local sourcing of multinational enterprises in China

    Get PDF
    Purpose – Local sourcing from indigenous firms by multinational enterprises (MNEs) is an important channel through which the former may benefit from the positive externalities generated by the latter. The purpose of this study is to analyze the extent and determinants of local sourcing of MNEs. Design/methodology/approach – Employing a survey dataset covering 493 multinational subsidiaries in China during 1999-2005, this paper applies the two-limit Tobit model. Findings – It is found that an MNE's local sourcing decision is influenced by its strategies, characteristics such as size and learning ability and country-of-origin. More specifically, export-orientation strategy, joint venture strategy and networking with local suppliers positively affect local sourcing. Small and autonomous subsidiaries tend to source more locally. Age has a non-linear effect. The importance of these determinants varies with regions. Research limitations/implications – Aiming at capacity building and competitiveness of indigenous firms, the Chinese government has initiated local content requirement. This study shows that such policy intervention could be counterproductive. The creation of a more competitive business environment by the government could promote more linkages. Originality/value – Given its critical role in economic development, local sourcing by MNEs has attracted much attention. Only limited research has been carried out on FDI linkage effects in China, and the location effect on FDI linkages has not been examined. This study aims to fill the gap by using Chinese survey data
    corecore