Electrocatalytic hydrogen evolution using amorphous tungsten phosphide nanoparticles

Amorphous tungsten phosphide (WP), which has been synthesized as colloidal nanoparticles with an average diameter of 3 nm, has been identified as a new electrocatalyst for the hydrogen-evolution reaction (HER) in acidic aqueous solutions. WP/Ti electrodes produced current densities of −10 mA cm^(−2) and −20 mA cm^(−2) at overpotentials of only −120 mV and −140 mV, respectively, in 0.50 M H_2SO_4(aq)

Nanostructured Nickel Phosphide as an Electrocatalyst for the Hydrogen Evolution Reaction

Nanoparticles of nickel phosphide (Ni_2P) have been investigated for electrocatalytic activity and stability for the hydrogen evolution reaction (HER) in acidic solutions, under which proton exchange membrane-based electrolysis is operational. The catalytically active Ni_2P nanoparticles were hollow and faceted to expose a high density of the Ni_2P(001) surface, which has previously been predicted based on theory to be an active HER catalyst. The Ni2P nanoparticles had among the highest HER activity of any non-noble metal electrocatalyst reported to date, producing H_2(g) with nearly quantitative faradaic yield, while also affording stability in aqueous acidic media

Amorphous Molybdenum Phosphide Nanoparticles for Electrocatalytic Hydrogen Evolution

Amorphous molybdenum phosphide (MoP) nanoparticles have been synthesized and characterized as electrocatalysts for the hydrogen-evolution reaction (HER) in 0.50 M H_2SO_4 (pH 0.3). Amorphous MoP nanoparticles (having diameters of 4.2 ± 0.5 nm) formed upon heating Mo(CO)6 and trioctylphosphine in squalane at 320 °C, and the nanoparticles remained amorphous after heating at 450 °C in H_2(5%)/Ar(95%) to remove the surface ligands. At mass loadings of 1 mg cm^–2, MoP/Ti electrodes exhibited overpotentials of −90 and −105 mV (−110 and −140 mV without iR correction) at current densities of −10 and −20 mA cm^–2, respectively. These HER overpotentials remained nearly constant over 500 cyclic voltammetric sweeps and 18 h of galvanostatic testing, indicating stability in acidic media under operating conditions. Amorphous MoP nanoparticles are therefore among the most active known molybdenum-based HER systems and are part of a growing family of active, acid-stable, non-noble-metal HER catalysts

Balancing hydrogen adsorption/desorption by orbital modulation for efficient hydrogen evolution catalysis

Hydrogen adsorption/desorption behavior plays a key role in hydrogen evolution reaction (HER) catalysis. The HER reaction rate is a trade-off between hydrogen adsorption and desorption on the catalyst surface. Herein, we report the rational balancing of hydrogen adsorption/desorption by orbital modulation using introduced environmental electronegative carbon/nitrogen (C/N) atoms. Theoretical calculations reveal that the empty d orbitals of iridium (Ir) sites can be reduced by interactions between the environmental electronegative C/N and Ir atoms. This balances the hydrogen adsorption/ desorption around the Ir sites, accelerating the related HER process. Remarkably, by anchoring a small amount of Ir nanoparticles (7.16 wt%) in nitrogenated carbon matrixes, the resulting catalyst exhibits significantly enhanced HER performance. This includs the smallest reported overpotential at 10 mA cm(-2) (4.5 mV), the highest mass activity at 10 mV (1.12 A mg(Ir)(-1)) and turnover frequency at 25 mV (4.21 H2 s(-1)) by far, outperforming Ir nanoparticles and commercial Pt/C

Comparison of the Performance of CoP-Coated and Pt-Coated Radial Junction n^+p-Silicon Microwire-Array Photocathodes for the Sunlight-Driven Reduction of Water to H_2(g)

The electrocatalytic performance for hydrogen evolution has been evaluated for radial-junction n^+p-Si microwire (MW) arrays with Pt or cobalt phosphide, CoP, nanoparticulate catalysts in contact with 0.50 M H_2SO_4(aq). The CoP-coated (2.0 mg cm^(–2)) n^+p-Si MW photocathodes were stable for over 12 h of continuous operation and produced an open-circuit photovoltage (V_(oc)) of 0.48 V, a light-limited photocurrent density (J_(ph)) of 17 mA cm^(–2), a fill factor (ff) of 0.24, and an ideal regenerative cell efficiency (η_(IRC)) of 1.9% under simulated 1 Sun illumination. Pt-coated (0.5 mg cm^(–2)) n^+p-Si MW-array photocathodes produced V_(oc) = 0.44 V, J_(ph) = 14 mA cm^(–2), ff = 0.46, and η = 2.9% under identical conditions. Thus, the MW geometry allows the fabrication of photocathodes entirely comprised of earth-abundant materials that exhibit performance comparable to that of devices that contain Pt

Recent advances in unveiling active sites in molybdenum sulfide-based electrocatalysts for the hydrogen evolution reaction

Hydrogen has received significant attention as a promising future energy carrier due to its high energy density and environmentally friendly nature. In particular, the electrocatalytic generation of hydrogen fuel is highly desirable to replace current fossil fuel-dependent hydrogen production methods. However, to achieve widespread implementation of electrocatalytic hydrogen production technology, the development of highly active and durable electrocatalysts based on Earth-abundant elements is of prime importance. In this context, nanostructured molybdenum sulfides (MoS x ) have received a great deal of attention as promising alternatives to precious metal-based catalysts. In this focus review, we summarize recent efforts towards identification of the active sites in MoS x -based electrocatalysts for the hydrogen evolution reaction (HER). We also discuss recent synthetic strategies for the engineering of catalyst structures to achieve high active site densities. Finally, we suggest ongoing and future research challenges in the design of advanced MoS x -based HER electrocatalysts

Conformal and continuous deposition of bifunctional cobalt phosphide layers on p-silicon nanowire arrays for improved solar hydrogen evolution

Vertically aligned p-silicon nanowire (SiNW) arrays have been extensively investigated in recent years as promising photocathodes for solar-driven hydrogen evolution. However, the fabrication of SiNW photocathodes with both high photoelectrocatalytic activity and long-term operational stability using a simple and affordable approach is a challenging task. Herein, we report conformal and continuous deposition of a di-cobalt phosphide (Co2P) layer on lithography-patterned highly ordered SiNW arrays via a cost-effective drop-casting method followed by a low-temperature phosphorization treatment. The as-deposited Co2P layer consists of crystalline nanoparticles and has an intimate contact with SiNWs, forming a well-defined SiNW@Co2P core/shell nanostructure. The conformal and continuous Co2P layer functions as a highly efficient catalyst capable of substantially improving the photoelectrocatalytic activity for the hydrogen evolution reaction (HER) and effectively passivates the SiNWs to protect them from photo-oxidation, thus prolonging the lifetime of the electrode. As a consequence, the SiNW@Co2P photocathode with an optimized Co2P layer thickness exhibits a high photocurrent density of -21.9 mA.cm(-2) at 0 V versus reversible hydrogen electrode and excellent operational stability up to 20 h for solar-driven hydrogen evolution, outperforming many nanostructured silicon photocathodes reported in the literature. The combination of passivation and catalytic functions in a single continuous layer represents a promising strategy for designing high-performance semiconductor photoelectrodes for use in solar-driven water splitting, which may simplify fabrication procedures and potentially reduce production costsThis work was funded by ERDF funds through the Portuguese Operational Programme for Competitiveness and Internationalization COMPETE 2020, and national funds through FCT – The Portuguese Foundation for Science and Technology, under the project “PTDC/CTM-ENE/2349/2014” (Grant Agreement No. 016660). The work is also partially funded by the Portugal-China Bilateral Collaborative Programme (FCT/21102/28/12/2016/S). L. F. Liu acknowledges the financial support of the FCT Investigator Grant (IF/01595/2014) and Exploratory Grant (IF/01595/2014/CP1247/CT0001). L. Qiao acknowledges the financial support of the Ministry of Science and Technology of China (Grant Agreement No. 2016YFE0132400).info:eu-repo/semantics/publishedVersio