Recent advances in osmotic energy generation via pressure-retarded osmosis (PRO): A review

© 2015 by the authors. Global energy consumption has been highly dependent on fossil fuels which cause severe climate change and, therefore, the exploration of new technologies to produce effective renewable energy plays an important role in the world. Pressure-retarded osmosis (PRO) is one of the promising candidates to reduce the reliance on fossil fuels by harnessing energy from the salinity gradient between seawater and fresh water. In PRO, water is transported though a semi-permeable membrane from a low-concentrated feed solution to a high-concentrated draw solution. The increased volumetric water flow then runs a hydro-turbine to generate power. PRO technology has rapidly improved in recent years; however, the commercial-scale PRO plant is yet to be developed. In this context, recent developments on the PRO process are reviewed in terms of mathematical models, membrane modules, process designs, numerical works, and fouling and cleaning. In addition, the research requirements to accelerate PRO commercialization are discussed. It is expected that this article can help comprehensively understand the PRO process and thereby provide essential information to activate further research and development

Assessment of pretreatment to microfiltration for desalination in terms of fouling index and molecular weight distribution

In this study, different processes such as flocculation with ferric chloride (FeCl3) and deep bed filtration (sand filtration and dual media filtration) as a pre-treatment to microfiltration (MF) were used for seawater desalination. The performance of these pre-treatments was determined in terms of silt density index (SDI) and modified fouling index (MFI) and flux decline in MF. Flux decline of MF with seawater was 45% without any pre-treatment, 42% after pre-treatment of FeCl3 flocculation, 24% after pre-treatment of sand filtration with in-line coagulation and 22% after pre-treatment of dual media filtration (sand and anthracite), respectively. MFI and SDI also indicated that deep bed filtration with in-line flocculation was better pre-treatment than flocculation alone. Detailed molecular weight distribution (MWD) of seawater organic matter was examined after different pretreatments. MWD of the initial seawater mainly ranged from 1510 Da to 130 Da. Deep bed filtration with in-line flocculation removed relatively large molecular weight of organic matter (1510-1180 Da), while the small molecular weights (less than 530 Da) were not removed. © 2009 Elsevier B.V. All rights reserved

Chronic deep brain stimulation of subthalamic and anterior thalamic nuclei for controlling refractory partial epilepsy

Summary Objectives. Experimental data and case reports of intractable epilepsy patients treated with deep brain stimulation (DBS) of the internal nuclei suggest a considerable anticonvulsant effect. We intended to describe the results of DBS on subthalamic nuclei and anterior thalamic nuclei (STN and ATN) from our patients and to evaluate the long-term efficiency and safety of DBS for controlling intractable epilepsy. Methods. Six patients with refractory epilepsy and inadequate for surgery were implanted with DBS electrodes (3 in STN and 3 in ATN, respectively), switched on after a week of insertion followed by chronological observation. Seizure counts were monitored and compared with pre-implantation baseline. Results. There was significant clinical improvement in respect of reduction of seizure frequency as well as the alleviation of ictal severity in almost patients. The mean reduction in seizure frequency was 62.3% (49.1% from STN vs. 75.4% from ATN). Except one patient (patient 3) with accidental infection on the right anterior chest, no complication or withdrawal of DBS was seen during our study. Conclusion. DBS on STN and ATN demonstrated their clear efficiency and relative safety comparable or superior to previous studies during long term follow-up. Subsequent, well designed studies warrant the further increase of the knowledge about antiepileptic effect of DBS

Novel membrane bioreactor (MBR) coupled with a nonwoven fabric filter for household wastewater treatment

Conventional and modified membrane bioreactors (MBRs) are increasingly used in small-scale wastewater treatment. However, their widespread applications are hindered by their relatively high cost and operational complexity. In this study, we investigate a new concept of wastewater treatment using a nonwoven fabric filter bag (NFFB) as the membrane bioreactor. Activated sludge is charged in the nonwoven fabric filter bag and membrane filtration via the fabric is achieved under gravity flow without a suction pump. This study found that the biofilm layer formed inside the NFFB achieved 10 mg/L of suspended solids in the permeate within 20 min of initial operation. The dynamic biofilter layer showed good filterability and the specific membrane resistance consisted of 0.3-1.9 × 1012 m/kg. Due to the low F/M ratio (0.04-0.10 kg BOD5/m3/d) and the resultant low sludge yield, the reactor was operated without forming excess sludge. Although the reactor provided aerobic conditions, denitrification occurred in the biofilm layer to recover the alkalinity, thereby eliminating the need to supplement the alkalinity. This study indicates that the NFFB system provides a high potential of effective wastewater treatment with simple operation at reduced cost, and hence offer an attractive solution for widespread use in rural and sparsely populated areas. Crown Copyright © 2009

Novel pre-treatment method for seawater reverse osmosis: Fibre media filtration

A high rate fibre filter was used as a pre-treatment to seawater reverse osmosis (SWRO) to reduce membrane fouling. Seawater was drawn from Chowder Bay where the Sydney Institute of Marine Science, Australia is located. A lab-scale fibre filter with a height of 1000 mm and a diameter of 30 mm was used in conjunction with in-line coagulation. The effect of operating the fibre filter with different packing densities (105, 115 kg/m3) and filtration velocities (40, 60 m/h) was investigated in terms of silt density index (SDI10), modified fouling index (MFI), pressure drop (ΔP), turbidity and molecular weight distribution (MWD). The use of in-line coagulation improved the performance of fibre filter as measured by the MFI and SDI. Regardless of filtration velocity and packing density the MFI and SDI10 values remained low as did the turbidity until the end of the filtration run. The MWD analysis showed the removal efficiencies of organic materials like biopolymers, fulvic acids, low MW acids for even experiments with the highest filtration velocity (60 m/h) and lowest packing density (105 kg/m3). This pre-treatment has a small foot print as it has the capacity of operating at a very high filtration velocity. © 2009 Elsevier B.V. All rights reserved

Atmospheric-pressure plasma seawater desalination: Clean energy, agriculture, and resource recovery nexus for a blue planet

Water connects every aspect of life. Only 4% of the world's water is fresh water, as most water sources have different degrees of salinity. As a result, billions of people face water scarcity, which is a global challenge. Desalination technologies that separate fresh water from solvated salt ions in saline water are attracting major attention. However, conventional desalination processes including thermally and pressure driven processes are highly energy intensive. To address this issue we demonstrate that the atmospheric-pressure plasma (APP) treatment of saline water can be a new potential alternative low-energy and green desalination route. Valuable salts are recovered by direct salt crystal precipitation within a short plasma processing time. During desalination and salt precipitation, plasma activated desalinated water (PADW) is generated and can be used for clean energy processes such as water electrolysis and sustainable agriculture by enhanced plant seed germination. In addition, functional nanomaterials can be extracted from the precipitated salt. The PADW exhibited a low salinity of 5.6 mS/cm with a low pH value of 2.1. The unique intrinsic PADW chemistries enabled electrochemical water splitting for both the hydrogen evolution reaction (HER) at a Pt electrode and the oxygen evolution reaction (OER) at a RuO2 electrode. Moreover, the feasibility of using PADW in sustainable agriculture was demonstrated by enhancing mungbean seed germination using tap water mixed with PADW. At optimum mix concentration, both seed germination rates and germination percentages increased. Finally, we demonstrated the feasibility of synthesizing high-value 2D nanomaterials exemplified by Mg(OH)2 nanosheets via a single step thermal process using the salt precipitated from the seawater by the plasma process. Combined with straightforward use of renewable electricity to generate APPs, this study reveals the plasma potential for sustainable recovery of clean water, clean energy applications, sustainable agriculture, and manufacturing of advanced functional nanomaterials – all from the greatest treasure of our blue planet – seawater.</p

Exact eigenstate analysis of finite-frequency conductivity in graphene

We employ the exact eigenstate basis formalism to study electrical conductivity in graphene, in the presence of short-range diagonal disorder and inter-valley scattering. We find that for disorder strength, $W \ge$ 5, the density of states is flat. We, then, make connection, using the MRG approach, with the work of Abrahams \textit{et al.} and find a very good agreement for disorder strength, $W$ = 5. For low disorder strength, $W$ = 2, we plot the energy-resolved current matrix elements squared for different locations of the Fermi energy from the band centre. We find that the states close to the band centre are more extended and falls of nearly as $1/E_l^{2}$ as we move away from the band centre. Further studies of current matrix elements versus disorder strength suggests a cross-over from weakly localized to a very weakly localized system. We calculate conductivity using Kubo Greenwood formula and show that, for low disorder strength, conductivity is in a good qualitative agreement with the experiments, even for the on-site disorder. The intensity plots of the eigenstates also reveal clear signatures of puddle formation for very small carrier concentration. We also make comparison with square lattice and find that graphene is more easily localized when subject to disorder.Comment: 11 pages,15 figure

Sizing Up the Impact of Embassies on Exports

The purpose of this study is to test for the effects of trade promotion via the foreign service. We develop a Melitz-based model where firms are heterogeneous with respect to productivity and must pay a beachhead cost to enter a foreign market, which can be reduced by government spending on trade promotion. The model predicts that unilateral trade promotion allows medium-sized firms to export. We test this prediction using Swedish firm-level data and information on the opening and closing of Swedish embassies abroad using Norwegian firms as control group. Our results lend support to the predictions of the model, with large and medium-sized firms responding most strongly to the opening of embassies

A transverse current rectification in graphene superlattice

A model for energy spectrum of superlattice on the base of graphene placed on the striped dielectric substrate is proposed. A direct current component which appears in that structure perpendicularly to pulling electric field under the influence of elliptically polarized electromagnetic wave was derived. A transverse current density dependence on pulling field magnitude and on magnitude of component of elliptically polarized wave directed along the axis of a superlattice is analyzed.Comment: 12 pages, 6 figure

Three-dimensional fluid simulation of a plasma display panel cell

In order to understand the discharge characteristics in an alternating current plasma display panel (ac PDP) and optimize it further, a three-dimensional fluid code (FL3P) has been developed. Using this simulator, various three-dimensional features of discharges are investigated in the sustain mode of PDP. First, the striations of wall charge are observed at both the anode and cathode side. Second, the local efficiency is obtained as a function of position. It is mainly divided into the anode region and the cathode region and highest near the anode center. Finally, the effects of various three-dimensional parameters are studied. As one of the examples showing the effect of electrode shaping, the discharge characteristics of a T-shaped electrode cell are compared with those of a conventional cell. The phosphor on barrier ribs contributes to over 44% of the total luminance, but barrier ribs themselves do not play an important role in the overall discharge efficiency. Address electrode width is not always proportional to the size of the discharge because of the wall loss of the particles to barrier ribs.open435