Glomerulogenesis and Histomorphometeric in Mus musculus Embryo

In mammals, the kidneys originate in an embryo from the mesoderm through three excretory organs, namely: Pronephros, Mesonephros, and Metanephros. After the formation of Metanephros is completed, the kidneys begin to form nephrogenesis through mesenchymal cells located at the tip of the ureteric bud, that contribute in the formation of glomerulus and Renal tubules. The stages of glomerulus formation in the embryo of albino mice at the age of 14 to 19 days of gestation were studied. It was obtained after the sacrifice of the expectant mother and the kidneys were excised from the embryos and fixed using Aqueous Bouin's solution, Microscopic slices with a thickness of 6 microns were then made in a paraffin method and were photographed by a camera for microscopic imaging. Histological measurements were performed on them using the program IMAGE J program and analyzed statistically using the SPSS program.  Results of the current study showed the presence of five stages of glomerulus formation, namely, the renal vesicle, which represents the first stage in the formation of the nephron and glomerulus. This is followed by the Comma shape stage, S-shaped stage, Capillary loop stage and finally the Mature glomerulus. This is surrounded by a capsule, known as Bowman’s capsule being part of the Malpighian or Renal corpuscle. The statistical analysis showed that there were significant differences between the average diameters of the glomerular development stages, and that the mature glomerulus was larger in diameter than the rest of the stages. The study aims to determine the stages of glomerulus formation and histologically measure its diameter in the embryo of a Mus musculus.

Analysis of the Thermal and Magnetic Properties of Amorphous Fe 61Co10Zr2.5Hf2.5Me2W2B20 (Where Me = Mo, Nb, Ni Or Y) Ribbons

The paper presents the results of structural and magnetic properties and thermal stability for a group of functional materials based on Fe61Co10Zr2.5Hf2.5Me2W2B20 (where Me = Mo, Nb, Ni or Y). Samples were obtained in the form of ribbons using melt-spinning method. The X-ray diffraction patterns of investigated samples confirmed their amorphous structure. Based on the analysis of DSC curves characteristic temperatures: glass forming temperature (Tg), crystallization temperature (Tx) and temperature range of the supercooled liquid ΔTx were determined. Small addition of transition metals elements has strong influence on magnetic and thermal parameters of studied materials. The comprehensive studies revealed that in terms of magnetic properties the Ni-addition resulted in highest reduction in coercivity and anisotropy field

The effect of microencapsulated phase change materials on the rheology of geopolymer and Portland cement mortars

The effect of microencapsulated phase‐change materials (MPCM) on the rheological properties of pre‐set geopolymer and Portland cement mortars was examined. Microcapsules with hydrophilic and hydrophobic shells were compared. The shear rate dependency of the viscosities fitted well to a double Carreau model. The zero shear viscosities are higher for geopolymer mortar, illustrating poorer workability. The time evolution of the viscosities was explored at shear rates of 1 and 10 s−1. New empirical equations were developed to quantify the time‐dependent viscosity changes. The highest shear rate disrupted the buildup of the mortar structures much more than the lower shear rate. Microcapsules with a hydrophobic shell affect the rheological properties much less than the microcapsules with a hydrophilic shell, due to the higher water adsorption onto the hydrophilic microcapsules. Shear forces was found to break down the initial structures within geopolymer mortars more easily than for Portland cement mortars, while the geopolymer reaction products are able to withstand shear forces better than Portland cement hydration products. Initially, the viscosity of geopolymer mortars increases relatively slowly during due to formation of geopolymer precursors; at longer times, there is a steeper viscosity rise caused by the development of a 3D‐geopolymer network. Disruption of agglomerates causes the viscosities of portland cement mortars to decrease during the first few minutes, after which the hydration process (increasing viscosities) competes with shear‐induced disruption of the structures (decreasing viscosities), resulting in a complex viscosity behavior.publishedVersio

Clostridium difficile in Ready-to-Eat Salads, Scotland

Of 40 ready-to-eat salads, 3 (7.5%) were positive for Clostridium difficile by PCR. Two isolates were PCR ribotype 017 (toxin A–, B+), and 1 was PCR ribotype 001. Isolates were susceptible to vancomycin and metronidazole but variably resistant to other antimicrobial drugs. Ready-to-eat salads may be potential sources for virulent C. difficile

Optically trapped bacteria pairs reveal discrete motile response to control aggregation upon cell–cell approach

Aggregation of bacteria plays a key role in the formation of many biofilms. The critical first step is cell–cell approach, and yet the ability of bacteria to control the likelihood of aggregation during this primary phase is unknown. Here, we use optical tweezers to measure the force between isolated Bacillus subtilis cells during approach. As we move the bacteria towards each other, cell motility (bacterial swimming) initiates the generation of repulsive forces at bacterial separations of ~3 μm. Moreover, the motile response displays spatial sensitivity with greater cell–cell repulsion evident as inter-bacterial distances decrease. To examine the environmental influence on the inter-bacterial forces, we perform the experiment with bacteria suspended in Tryptic Soy Broth, NaCl solution and deionised water. Our experiments demonstrate that repulsive forces are strongest in systems that inhibit biofilm formation (Tryptic Soy Broth), while attractive forces are weak and rare, even in systems where biofilms develop (NaCl solution). These results reveal that bacteria are able to control the likelihood of aggregation during the approach phase through a discretely modulated motile response. Clearly, the force-generating motility we observe during approach promotes biofilm prevention, rather than biofilm formation

Microstructure and high temperature oxidation of modified ductile ni-resist alloy with higher manganese content

In this study, ductile Ni-resist with a minimum of 18 wt% nickel composition was modified. Up to 12 wt% manganese was added together with 10 wt% nickel to investigate the effects of the alloying elements on its microstructure, mechanical properties and isothermal oxidation behaviour. The results show a higher manganese composition on modified ductile Ni-resist with increased carbide formation, and a slightly decreased elevated temperature tensile strength. The addition of higher Mn [wt%] slightly increased the oxidation resistance. Three different oxide layers were observed on the modified ductile Ni-resist after 25 h hot corrosion at 765◦C

Geology and rural landscapes in central Spain (Guadalajara, Castilla—La Mancha)

Methods commonly used in regional geological analysis were employed to study the visual landscapes of the Sigüenza–Molina de Aragón area (Spain). Landscape data were compiled to produce a landscape map and a photograph catalogue. Lithological composition, tectonic structure and recent erosive processes are the main factors controlling the visual landscapes. Territorial properties, such as colours and agricultural capacities, are controlled by these geological characteristics. The landscape map and the photographic catalogue is the main contribution of this paper. The first level of landscape classification distinguishes zones with dominance of either flat, concave or convex areas. Other parts of the territory are, however, composed of concave and convex combinations that originate hybrid orographic structures. In a second level of classification, several subdivisions for each of these types are established

Properties of a new insulation material glass bubble in geopolymer concrete

This paper details analytical research results into a novel geopolymer concrete embedded with glass bubble as its thermal insulating material, fly ash as its precursor material, and a combination of sodium hydroxide (NaOH) and sodium silicate (Na2SiO3) as its alkaline activator to form a geopolymer system. The workability, density, compressive strength (per curing days), and water absorption of the sample loaded at 10% glass bubble (loading level determined to satisfy the minimum strength requirement of a load-bearing structure) were 70 mm, 2165 kg/m3, 52.58 MPa (28 days), 54.92 MPa (60 days), and 65.25 MPa (90 days), and 3.73 %, respectively. The thermal conductivity for geopolymer concrete decreased from 1.47 to 1.19 W/mK, while the thermal diffusivity decreased from 1.88 to 1.02 mm2/s due to increased specific heat from 0.96 to 1.73 MJ/m3K. The improved physicomechanical and thermal (insulating) properties resulting from embedding a glass bubble as an insulating material into geopolymer concrete resulted in a viable composite for use in the construction industry

Gentamicin sulphate permeation through porcine intestinal epithelial cell monolayer

Gentamicin is an aminoglycoside antibiotic widely used in combination with dimethyl sulphoxide (DMSO) in topical drug formulations. It is not known, however, whether DMSO can enhance the permeation of gentamicin through biological membranes, leading to oto- and nephrotoxic side effects. A simple and reliable high-performance liquid chromatographic (HPLC) method was applied for the quantitative determination of gentamicin collected from the apical and basolateral compartments of the porcine intestinal epithelial cell line IPEC-J2 cell monolayer using fluorometric derivatisation of the analyte with fluorenylmethyloxycarbonyl chloride (FMOC) prior to chromatographic run in the presence and absence of 1% DMSO. The lack of change in transepithelial electrical resistance (TER) demonstrated that gentamicin and 1% DMSO did not affect IPEC-J2 cell monolayer integrity via the disruption of cell membranes. Chromatographic data also ascertained that gentamicin penetration across the cell monolayer even in the presence of 1% DMSO was negligible at 6 h after the beginning of apical gentamicin administration. This study further indicates that the addition of this organic solvent does not increase the incidence of toxic effects related to gentamicin permeation

Warpage optimisation on the moulded part with straight drilled and conformal cooling channels using Response Surface Methodology (RSM), Glowworm Swarm Optimisation (GSO) and Genetic Algorithm (GA) Optimisation Approaches

It is quite challenging to control both quality and productivity of products produced using injection molding process. Although many previous researchers have used different types of optimisation approaches to obtain the best configuration of parameters setting to control the quality of the molded part, optimisation approaches in maximising the performance of cooling channels to enhance the process productivity by decreasing the mould cycle time remain lacking. In this study, optimisation approaches namely Response Surface Methodology (RSM), Genetic Algorithm (GA) and Glowworm Swarm Optimisation (GSO) were employed on front panel housing moulded using Acrylonitrile Butadiene Styrene (ABS). Each optimisation method was analysed for both straight drilled and Milled Groove Square Shape (MGSS) conformal cooling channel moulds. Results from experimental works showed that, the performance of MGSS conformal cooling channels could be enhanced by employing the optimisation approach. Therefore, this research provides useful scientific knowledge and an alternative solution for the plastic injection moulding industry to improve the quality of moulded parts in terms of deformation using the proposed optimisation approaches in the used of conformal cooling channels mould