Four methods for measuring the solubilities of gases and vapors in liquids and polymers

This review is dedicated to professors Alexey Morachevsky and Natalia Smirnova to celebrate their distinguished contributions to research and education at the University of St.Petersburg.Peer reviewedPreprintPublisher PD

Overview of the JET results in support to ITER

The 2014–2016 JET results are reviewed in the light of their significance for optimising the ITER research plan for the active and non-active operation. More than 60 h of plasma operation with ITER first wall materials successfully took place since its installation in 2011. New multi-machine scaling of the type I-ELM divertor energy flux density to ITER is supported by first principle modelling. ITER relevant disruption experiments and first principle modelling are reported with a set of three disruption mitigation valves mimicking the ITER setup. Insights of the L–H power threshold in Deuterium and Hydrogen are given, stressing the importance of the magnetic configurations and the recent measurements of fine-scale structures in the edge radial electric. Dimensionless scans of the core and pedestal confinement provide new information to elucidate the importance of the first wall material on the fusion performance. H-mode plasmas at ITER triangularity (H = 1 at βN ~ 1.8 and n/nGW ~ 0.6) have been sustained at 2 MA during 5 s. The ITER neutronics codes have been validated on high performance experiments. Prospects for the coming D–T campaign and 14 MeV neutron calibration strategy are reviewed.European Commission (EUROfusion 633053

Multi-objective optimisation for minimum quantity lubrication assisted milling process based on hybrid response surface methodology and multi-objective genetic algorithm

© 2019 by SAGE Publications Ltd.Parametric modelling and optimisation play an important role in choosing the best or optimal cutting conditions and parameters during machining to achieve the desirable results. However, analysis of optimisation of minimum quantity lubrication–assisted milling process has not been addressed in detail. Minimum quantity lubrication method is very effective for cost reduction and promotes green machining. Hence, this article focuses on minimum quantity lubrication–assisted milling machining parameters on AISI 1045 material surface roughness and power consumption. A novel low-cost power measurement system is developed to measure the power consumption. A predictive mathematical model is developed for surface roughness and power consumption. The effects of minimum quantity lubrication and machining parameters are examined to determine the optimum conditions with minimum surface roughness and minimum power consumption. Empirical models are developed to predict surface roughness and power of machine tool effectively and accurately using response surface methodology and multi-objective optimisation genetic algorithm. Comparison of results obtained from response surface methodology and multi-objective optimisation genetic algorithm depict that both measured and predicted values have a close agreement. This model could be helpful to select the best combination of end-milling machining parameters to save power consumption and time, consequently, increasing both productivity and profitability.Peer reviewedFinal Published versio

Evidence of scawtite and tilleyite formation at ambient conditions in hydrated Portland cement blended with freshly-precipitated nano-size calcium carbonate to reduce greenhouse gas emissions

Acknowledgements We thank CCM for its financial support of a PhD student ship tenable by LJM. Electron Microscopy was performed in the ACEMAC Facility at the University of Aberdeen by Mr. J. Still. Several of our group have contributed to discussion and provided samples, so thanks go to Wanawan Pragot and M. Ara Carballo-MeilanPeer reviewedPostprin

Independent Culture Review of London Fire Brigade

This review was established by the London Fire Commissioner in response to the tragic death of firefighter Jaden Matthew Francois-Esprit, who took his own life in August 2020. His family were concerned that he had been bullied because of his race. Yet while Jaden’s death is the catalyst for the review, it should not be seen in isolation. Cultural problems have long dogged LFB

Development of high-speed directly-modulated DFB and DBR lasers with surface gratings

The conventional distributed feedback and distributed Bragg reflector edge-emitting lasers employ buried gratings, which require two or more epitaxial growth steps. By using lateral corrugations of the ridge-waveguide as surface gratings the epitaxial overgrowth is avoided, reducing the fabrication complexity, increasing the yield and reducing the fabrication cost. The surface gratings are applicable to different materials, including Al-containing ones and can be easily integrated in complex device structures and photonic circuits. Single-contact and multiple contact edge-emitting lasers with laterally-corrugated ridge waveguide gratings have been developed both on GaAs and InP substrates with the aim to exploit the photon-photon resonance in order to extend their direct modulation bandwidth. The paper reports on the characteristics of such surface-grating-based lasers emitting both at 1.3 and 1.55 μm and presents the photon-photon resonance extended small-signal modulation bandwidth (> 20 GHz) achieved with a 1.6 mm long single-contact device under direct modulation. Similarly structured devices, with shorter cavity lengths are expected to exceed 40 GHz smallsignal modulation bandwidth under direct modulatio