5 research outputs found
Advances in Thin-Film Si Solar Cells by Means of SiOx Alloys
The conversion efficiency of thin-film silicon solar cells needs to be improved to be competitive with respect to other technologies. For a more efficient use of light across the solar spectrum, multi-junction architectures are being considered. Light-management considerations are also crucial in order to maximize light absorption in the active regions with a minimum of parasitic optical losses in the supportive layers. Intrinsic and doped silicon oxide alloys can be advantageously applied within thin-film Si solar cells for these purposes. Intrinsic a-SiOx:H films have been fabricated and characterized as a promising wide gap absorber for application in triple-junction solar cells. Single-junction test devices with open circuit voltage up to 950 mV and ~1 V have been demonstrated, in case of rough and flat front electrodes, respectively. Doped silicon oxide alloys with mixed-phase structure have been developed, characterized by considerably lower absorption and refractive index with respect to standard Si-based films, accompanied by electrical conductivity above 10â5 S/cm. These layers have been successfully applied both into single-junction and micromorph tandem solar cells as superior doped layers with additional functionalities
Self-organized nanoscale roughness engineering for broadband light trapping in thin film solar cells
We present a self-organizedmethod based on defocused ion beamsputtering for nanostructuring glass substrates which feature antireflective and light trapping effects. By irradiating the substrate, capped with a thin gold (Au) film, a self-organized Au nanowire stencil mask is firstly created. The morphology of the mask is then transferred to the glass surface by further irradiating the substrate, finally producing high aspect ratio, uniaxial ripple-like nanostructures whose morphological parameters can be tailored by varying the ion fluence. The effect of a Ti adhesion layer, interposed between glass and Au with the role of inhibiting nanowire dewetting, has also been investigated in order to achieve an improved morphological tunability of the templates. Morphological and optical characterization have been carried out, revealing remarkable light trapping performance for the largest ion fluences. The photon harvesting capability of the nanostructured glass has been tested for different preparation conditions by fabricating thin film amorphous Si solar cells. The comparison of devices grown on textured and flat substrates reveals a relative increase of the short circuit current up to 25%. However, a detrimental impact on the electrical performance is observed with the rougher morphologies endowed with steep v-shaped grooves. We finally demonstrate that post-growth ion beam restructuring of the glass template represents a viable approach toward improved electrical performance
Plasmonic Light Trapping in Thin-Film Solar Cells: Impact of Modeling on Performance Prediction
We present a comparative study on numerical models used to predict the absorption enhancement in thin-film solar cells due to the presence of structured back-reflectors exciting, at specific wavelengths, hybrid plasmonic-photonic resonances. To evaluate the effectiveness of the analyzed models, they have been applied in a case study: starting from a U-shaped textured glass thin-film, ”c-Si:H solar cells have been successfully fabricated. The fabricated cells, with different intrinsic layer thicknesses, have been morphologically, optically and electrically characterized. The experimental results have been successively compared with the numerical predictions. We have found that, in contrast to basic models based on the underlying schematics of the cell, numerical models taking into account the real morphology of the fabricated device, are able to effectively predict the cells performances in terms of both optical absorption and short-circuit current values
Monolithic Perovskite/Silicon-Heterojunction Tandem Solar Cells with Nanocrystalline Si/SiOx Tunnel Junction
Perovskite/silicon tandem solar cells have strong potential for high efficiency and low cost photovoltaics. In monolithic (two-terminal) configurations, one key element is the interconnection region of the two subcells, which should be designed for optimal light management and prevention of parasitic p/n junctions. We investigated monolithic perovskite/silicon-heterojunction (SHJ) tandem solar cells with a p/n nanocrystalline silicon/silicon-oxide recombination junction for improved infrared light management. This design can additionally provide for resilience to shunts and simplified cell processing. We probed modified SHJ solar cells, made from double-side polished n-type Si wafers, which included the proposed front-side p/n tunnel junction with the p-type film simultaneously functioning as selective charge transport layer for the SHJ bottom cell, trying different thicknesses for the n-type layer. Full tandem devices were then tested, by applying a planar n-i-p mixed-cation mixed-halide perovskite top cell, fabricated via low temperature solution methods to be compatible with the processed Si wafer. We demonstrate the feasibility of this tandem cell configuration over a 1 cm2 area with negligible J-V hysteresis and a VOC ~1.8 V, matching the sum of the VOC-s contributed by the two components