Large ordered moment with strong easy-plane anisotropy and vortex-domain pattern in the kagome ferromagnet Fe3_3Sn

We report the structural and magnetic properties of high-quality bulk single crystals of the kagome ferromagnet Fe$_3$Sn. The dependence of magnetisation on the magnitude and orientation of the external field reveals strong easy-plane type uniaxial magnetic anisotropy, which shows a monotonous increase from $K_1=-0.99\times 10^6 J/m^3$ at 300\,K to $-1.23\times10^6 J/m^3$ at 2\,K. Our \textit{ab initio} electronic structure calculations yield the value of total magnetic moment of about 6.9 $\mu_B$/f.u. and a magnetocrystalline anisotropy energy density of 0.406\,meV/f.u. ($1.16\times10^6 J/m^3$) both being in good agreement with the experimental values. The self-consistent DFT computations for the components of the spin/orbital moments indicate that the small difference between the saturation magnetisations measured along and perpendicular to the kagome layers results from the subtle balance between the Fe and Sn spin/orbital moments on the different sites. In zero field, magnetic force microscopy reveals micrometer-scale magnetic vortices with weakly pinned cores that vanish at $\sim$3\,T applied perpendicular to the kagome plane. Our micromagnetic simulations, using the experimentally determined value of anisotropy, well reproduce the observed vortex-domain structure. The present study, in comparison with the easy-axis ferromagnet Fe$_3$Sn$_2$, shows that varying the stacking of kagome layers provides an efficient control over magnetic anisotropy in this family of Fe-based kagome magnets.Comment: 10 pages, 5 figure

Corruption, democracy and control effectiveness of the state Коррупция, демократия и регуляторная эффективность государства

The object of analysis is a state as a distributed system of decision making and the subject of analysis is its disfunction as a result of action of institutional factors, in particular, corruption as an informal negative institute. The obtained results provide grounds for doubts in positive influence of democracy upon socio-economic processes, including upon the level of perceptible corruption. This suggests that democracy facilitates dispersion of responsibility and alienation of science from control, since scientific knowledge is not a “mass product” and becomes less and less demanded from the ruling elite in Ukraine. The function of the science as an institutional factor of effectiveness of state control lies in development of concepts of non-discretional mechanisms of decision making and also formulation of clear criteria for assessment of results of activity of subjects endowed with authority of decision making, in order to increase the level of their responsibility. Thus, we speak about such institutional factors of state control effectiveness as social responsibility and social control.Объектом анализа является государство как распределенная система принятия решений, а предметом – ее дисфункция как результат действия институциональных факторов, в частности, коррупции как неформального негативного института. Полученные результаты дают основание усомниться также в положительном влиянии демократии на социально-экономические процессы, в том числе, и на уровень воспринимаемой коррупции. Это наводит на мысль о том, что демократия способствует распылению ответственности и отчуждению науки от управления, поскольку научное знание не является «продуктом массового спроса» и становится все менее востребованным со стороны правящей элиты в Украине. Функция науки как институционального фактора эффективности государственного управления заключается в развитии представлений о недискреционных механизмах принятия решений, а так же формулировке четких критериев для оценки результатов деятельности субъектов, наделенных полномочиями принятия решений, с целью повышения уровня их ответственности. Таким образом, речь идет о таких институциональных факторах государственной регуляторной эффективности, как социальная ответственность и социальный контроль

Incorporation of Hexanuclear Mn(II,III) Carboxylate Clusters with a {Mn6O2} Core in Polymeric Structures

A new series of hexanuclear mixed-valent carboxylate coordination clusters of the type [Mn6O2(O2CR)10L4] (R = CMe3; CHMe2) featuring a {MnII4MnIII2(μ4-O)2} core of composition [Mn6O2(O2CCMe3)10(Me3CCO2H)3(EtOH)]•(Me3CCO2H) (1), [Mn6O2(O2CCMe3)10(Me3CCO2H)2 (EtOH)2]•2(EtOH) (2) and [Mn6O2(O2CCMe3)10(Me3CCO2H)2(MeOH)2]•2(MeOH)•H2O (3), and coordination polymers which incorporate such clusters, namely [Mn6O2(O2CCHMe2)10(pyz)(MeOH)2]n (4), {[Mn6O2(O2CCHMe2)10(pyz)1.5(H2O)]•0.5(H2O)}n (5), and [Mn6O2(O2CCMe3)10(HO2CCMe3)2(en)]n (6), have been synthesized (where pyz = pyrazine, en = ethyl nicotinate). The modification of the cluster surface by a diverse combination of capped or bridging ligands attached to peripheral MnII atoms results in discrete clusters with a closed hydrophobic exterior shell in 1 and 2, supramolecular chains built through hydrogen bonded solvent molecule clusters in 3, linear coordination polymers in 4 and 6 or a ladder-like coordination polymer in 5. The H-bonded coordination polymers 4 and 5 form supramolecular layers in crystals

Alkyl Substituent in Heterocyclic Substrate, Carbon Skeleton Length of <i>O</i>-Nucleophilic Agent and Conditions Influence the Product Composition from Competitive Reactions of <i>S_N^ipso</i> Substitution by Aliphatic Oligoethers

Using 1H NMR spectroscopy, we studied the relative mobility of the NO2 group in 1-alkyl-5-nitro-1,2,4-triazoles in the reaction of nucleophilic heterocyclic substitution by aliphatic oligoethers. The main pathways of the SNipso substitution process and the composition of resultant products from competitive reactions were examined, and the key factors influencing the relative mobility of the nitro group, such as the nitrotriazole substrate constitution, the carbon skeleton length of the O-nucleophilic agent and the process conditions, were discussed. Several independent competitive reactions directed towards the substitution of the nitro group at position C(5) in the alkyltriazole substrate by different types of nucleophiles such as alkoxide-, hydroxide- and triazolonate anions were observed to take place under conditions used. The major reaction yielded oligoethers containing terminal alkyltriazole heterocycles. Secondary reactions occurred to form the corresponding triazolone and N–C triazolyl triazolone structures in the reaction system. Additionally, in excess of the alkaline agent, alkaline hydrolysis was observed to proceed at the final stages of the process involving the O-nucleophile having a longer oligoether backbone in the series studied, leading to the formation of new O-nucleophilic sites. The obtained findings can provide a foundation for devising a method for the modification of a wide range of commercially available aliphatic oligo- or polyethers to prepare functional macromolecules whose terminals carry bioactive 1,2,4-triazole heterocycles located at a desired distance from each other

New 5-Aminotetrazole-Based Energetic Polymers: Synthesis, Structure and Properties

An N-glycidyl-5-aminotetrazole homopolymer was synthesized herein by nucleophilic substitution of 5-aminotetrazole heterocycles for chlorine atoms in poly-(epichlorohydrin)-butanediol. Copolymers of N-glycidyl-5-aminotetrazole and glycidyl azide with a varied ratio of energetic elements were synthesized by simultaneously reacting the 5-aminotetrazole sodium salt and the azide ion with the starting polymeric matrix. The 5-aminotetrazole-based homopolymer was nitrated to furnish a polymer whose macromolecule is enriched additionally with energy-rich terminal ONO2 groups and nitrate anions. The structures of the synthesized polymers were characterized by 1H and 13C NMR and IR spectroscopies, elemental analysis and gel-permeation chromatography. The densities were experimentally measured, and thermal stability data were acquired by differential scanning calorimetry. The insertion of aminotetrazole heterocycles into the polymeric chain and their modification via nitration provides an acceptable thermal stability and a considerable enhancement in density and nitrogen content compared to azide homopolymer GAP. By the 1.3-dipolar cycloaddition reaction, we demonstrated the conceptual possibility of preparing spatially branched, energy-rich polymeric binders bearing 5-aminotetrazole and 1,2,3-triazole heterocycles starting from the plasticized azide copolymers. The presence of the aforesaid advantages makes the reported polymers attractive candidates for use as a scaffold of energetic binders

Nickel(II)-, cobalt(II)-, copper(II)-, and zinc(II)-phthalate and 1-methylimidazole coordination compounds: synthesis, crystal structures and magnetic properties

Three new coordination polymers [M(Pht)(1-MeIm)2]n (where M=Cu (1), Zn (2), Co (3); Pht2−=dianion of o-phthalic acid; 1-MeIm=1-methylimidazole) and two compounds [M(1-MeIm)6](HPht)2 · 2H2O (M=Co (4), Ni (5)) have been synthesized and characterized by X-ray crystallography. The structures of 1–3 (2 is isostructural to 3) consist of [M(1-MeIm)2] building units connected by 1,6-bridging phthalate ions to form infinite chains. In complex 1, each copper(II) center adopts a square coordination mode of N2O2 type by two O atoms from different phthalate ions and two N atoms of 1-MeIm, whereas in 3 two independent metal atoms are tetrahedrally (N2O2) coordinated to a pair of Pht ligands and a pair of 1-MeIm molecules. There are only van der Waals interactions between the chains in 1, while the three-dimensional network in 3 is assembled by C–H⋯O contacts. In contrast to polymers 1–3 the structures of 4 and 5 (complexes are also isostructural) are made up of the [M(1-MeIm)6]2+ cation, two hydrogen phthalate anions (HPht−) and two H2O solvate molecules. The coordination around each metal(II) atom is octahedral with six nitrogen atoms of 1-MeIm. Extended hydrogen bonding networks embracing the solvate water molecules and a phthalate residue as well as the weak C–H⋯O interactions stabilize the three-dimensional structures. Magnetic studies clearly show that the magnetic ions do not interact with each other. Furthermore, in compound 4 we have another example of a highly anisotropic Co2+ ion with a rhombic g-tensor and large zero-field-splitting. The complexes were also characterized by IR and 1H NMR spectroscopy, thermogravimetric analysis, and all data are discussed in the terms of known structures

Cluster-Based Networks: 1D and 2D Coordination Polymers Based on {MnFe2(mu(3)-O)}-Type Clusters

A straightforward approach to heterometallic Mn-Fe cluster-based coordination polymers is presented. By employing a mixed-valent μ(3)-oxo trinuclear manganese(II/III) pivalate cluster, isolated as [Mn(II)Mn(III)(2)O(O(2)CCMe(3))(6)(hmta)(3)]·(solvent) (hmta = hexamethylenetetramine; solvent = n-propanol (1), toluene (2)) in the reaction with a μ(3)-oxo trinuclear iron(III) pivalate cluster compound, [Fe(3)O(O(2)CCMe(3))(6)(H(2)O)(3)]O(2)CCMe(3)·2Me(3)CCO(2)H, three new heterometallic {Mn(II)Fe(III)(2)} cluster-based coordination polymers were obtained: the one-dimensional polymer chain compounds {[MnFe(2)O(O(2)CCMe(3))(6)(hmta)(2)]·0.5MeCN}(n) (3) and {[MnFe(2)O(O(2)CCMe(3))(6)(hmta)(2)]·Me(3)CCO(2)H·(n-hexane)}(n) (4) and the two-dimensional layer compound {[MnFe(2)O(O(2)CCMe(3))(6)(hmta)(1.5)]·(toluene)}(n) (5). Single-crystal X-ray diffraction analysis reveals a μ(3)-oxo trinuclear pivalate cluster building block as the main constituent in all polymer compounds. Different M:hmta ratios in 1-5 are related to the different structural functions of the N-containing ligand. In clusters 1 and 2, three hmta ligands are monodentate, whereas in chains 3 and 4 two hmta ligands act as bridging ligands and one is a monodentate ligand; in 5, all hmta molecules act as bidentate bridges. Magnetic studies indicate dominant antiferromagnetic interactions between the metal centers in both homometallic {Mn(3)}-type clusters 1 and 2 and heterometallic {MnFe(2)}-type coordination polymers 3-5. Modeling of the magnetic susceptibility data to a isotropic model Hamiltonian yields least-squares fits for the following parameters: J(1)(Mn(II)-Mn(III)) = -6.6 cm(-1) and J(2)(Mn(III)-Mn(III)) = -5.4 cm(-1) for 1; J(1) = -5.5 cm(-1) and J(2)(Mn(III)-Mn(III)) = -3.9 cm(-1) for 2; J(1)(Mn(II)-Fe(III)) = -17.1 cm(-1) and J(2)(Fe(III)-Fe(III)) = -43.7 cm(-1) for 3; J(1) = -23.8 cm(-1) and J(2) = -53.4 cm(-1) for 4; J(1) = -13.3 cm(-1) and J(2) = -35.4 cm(-1) for 5. Intercluster coupling plays a significant role in all compounds 1-5