Rhodamine B Photodegradation in Aqueous Solutions Containing Nitrogen Doped TiO₂ and Carbon Nanotubes Composites

In this work, new results concerning the potential of mixtures based on nitrogen doped titanium dioxide (TiO2:N) and carbon nanotubes (CNTs) as possible catalyst candidates for the rhodamine B (RhB) UV photodegradation are reported. The RhB photodegradation was evaluated by UV–VIS absorption spectroscopy using samples of TiO2:N and CNTs of the type of single-walled carbon nanotubes (SWNTs), double-wall carbon nanotubes (DWNTs), multi-wall carbon nanotubes (MWNTs), and single-walled carbon nanotubes functionalized with carboxyl groups (SWNT-COOH) having various concentrations of CNTs. The best photocatalytic performance was obtained for sample containing TiO2:N and 2.5 wt.% SWNTs-COOH, when approx. 85% of dye removal was achieved after 300 min. of UV irradiation. The reaction kinetics of RhB aqueous solutions containing TiO2:N/CNT mixtures followed a complex first-order kinetic model. The TiO2:N/CNTs catalyst induced higher photodegradation efficiency of RhB than TiO2:N due to the presence of CNTs, which act as adsorbent and dispersing agent and capture the photogenerated electrons of TiO2:N hindering the electron–hole recombination

Annealing-Induced High Ordering and Coercivity in Novel L10 CoPt-Based Nanocomposite Magnets

A novel class of quaternary intermetallic alloys based on CoPt is investigated in view of their interesting magnetic properties induced by the presence of hard magnetic L10 phase. A Co48Pt28Ag6B18 alloy has been prepared by rapid solidification from the melt and subjected to various isothermal annealing procedures. The structure and magnetism of both as-cast and annealed samples as well as the phase evolution with temperature are investigated by means of thermal analysis, X-ray, and selected area electron diffraction, scanning and high-resolution electron microscopy, and magnetic measurements. The X-ray diffraction (XRD) analysis shows that both the as-cast alloy and the sample annealed at 400 °C (673 K) have a nanocrystalline structure where fcc CoPt phase predominates. Annealing at 473 °C promotes the formation of L10 phase triggered by the disorder-order phase transformation as documented in the differential scanning calorimetry results. The sample annealed at 670 °C (943 K) shows full formation of L10 CoPt as revealed by XRD. Magnetic measurements showed coercivity values ten times increased compared to the as-cast state. This confirms the full formation of L10 CoPt in the annealed samples. Moreover, detailed atomic resolution HREM images and SAED patterns show the occurrence of the rarely seen (003) superlattice peaks, which translated into a high ordering of the L10 CoPt superlattice. Such results spur more interest in finding novel classes of nanocomposite magnets based on L10 phase

Polyaniline photoluminescence quenching induced by single-walled carbon nanotubes enriched in metallic and semiconducting tubes

International audienc

Multifunctional GaFeO3 Obtained via Mechanochemical Activation Followed by Calcination of Equimolar Nano-System Ga2O3–Fe2O3

The equimolar oxide mixture β-Ga2O3—α-Fe2O3 was subjected to high-energy ball milling (HEBM) with the aim to obtain the nanoscaled GaFeO3 ortho-ferrite. X-ray diffraction, 57Fe Mössbauer spectroscopy, and transmission electron microscopy were used to evidence the phase structure and evolution of the equimolar nano-system β-Ga2O3—α-Fe2O3 under mechanochemical activation, either as-prepared or followed by subsequent calcination. The mechanical activation was performed for 2 h to 12 h in normal atmosphere. After 12 h of HEBM, only nanoscaled (~20 nm) gallium-doped α-Fe2O3 was obtained. The GaFeO3 structure was obtained as single phase, merely after calcination at 950 °C for a couple of hours, of the sample being subjected to HEBM for 12 h. This temperature is 450 °C lower than used in the conventional solid phase reaction to obtain gallium orthoferrite. The optical and magnetic properties of representative nanoscaled samples, revealing their multifunctional character, were presented

Reduced Graphene Oxide Sheets as Inhibitors of the Photochemical Reactions of α-Lipoic Acid in the Presence of Ag and Au Nanoparticles

The influence of Ag and Au nanoparticles and reduced graphene oxide (RGO) sheets on the photodegradation of α-lipoic acid (ALA) was determined by UV-VIS spectroscopy. The ALA photodegradation was explained by considering the affinity of thiol groups for the metallic nanoparticles synthesized in the presence of trisodium citrate. The presence of excipients did not induce further changes when ALA interacts with Ag and Au nanoparticles with sizes of 5 and 10 nm by exposure to UV light. Compared to the Raman spectrum of ALA powder, changes in Raman lines’ position and relative intensities when ALA has interacted with films obtained from Au nanoparticles with sizes between 5 and 50 nm were significant. These changes were explained by considering the chemical mechanism of surface-enhanced Raman scattering (SERS) spectroscopy. The photodegradation of ALA that had interacted with metallic nanoparticles was inhibited in the presence of RGO sheets

Room Temperature Ferromagnetic Mn:Ge(001)

We report the synthesis of a room temperature ferromagnetic Mn-Ge system obtained by simple deposition of manganese on Ge(001), heated at relatively high temperature (starting with 250 °C). The samples were characterized by low energy electron diffraction (LEED), scanning tunneling microscopy (STM), high resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), superconducting quantum interference device (SQUID), and magneto-optical Kerr effect (MOKE). Samples deposited at relatively elevated temperature (350 °C) exhibited the formation of ~5–8 nm diameter Mn5Ge3 and Mn11Ge8 agglomerates by HRTEM, while XPS identified at least two Mn-containing phases: the agglomerates, together with a Ge-rich MnGe~2.5 phase, or manganese diluted into the Ge(001) crystal. LEED revealed the persistence of long range order after a relatively high amount of Mn (100 nm) deposited on the single crystal substrate. STM probed the existence of dimer rows on the surface, slightly elongated as compared with Ge–Ge dimers on Ge(001). The films exhibited a clear ferromagnetism at room temperature, opening the possibility of forming a magnetic phase behind a nearly ideally terminated Ge surface, which could find applications in integration of magnetic functionalities on semiconductor bases. SQUID probed the co-existence of a superparamagnetic phase, with one phase which may be attributed to a diluted magnetic semiconductor. The hypothesis that the room temperature ferromagnetic phase might be the one with manganese diluted into the Ge crystal is formulated and discussed

Magnetite-Based Nanostructured Coatings Functionalized with <i>Nigella sativa</i> and Dicloxacillin for Improved Wound Dressings

In this study, we report the performance improvement of wound dressings by covering them with magnetite-based nanostructured coatings. The magnetite nanoparticles (Fe3O4 NPs) were functionalized with Nigella sativa (N. sativa) powder/essential oil and dicloxacillin and were synthesized as coatings by matrix assisted pulsed laser evaporation (MAPLE). The expected effects of this combination of materials are: (i) to reduce microbial contamination, and (ii) to promote rapid wound healing. The crystalline nature of core/shell Fe3O4 NPs and coatings was determined by X-ray diffraction (XRD). Differential Scanning Calorimetry (DSC) and Thermo Gravimetric Analysis (TGA) have been coupled to investigate the stability and thermal degradation of core/shell nanoparticle components. The coatings’ morphology was examined by scanning electron microscopy (SEM). The distribution of chemical elements and functional groups in the resulting coatings was evidenced by Fourier transform infrared (FTIR) spectrometry. In order to simulate the interaction between wound dressings and epithelial tissues and to evaluate the drug release in time, the samples were immersed in simulated body fluid (SBF) and investigated after different durations of time. The antimicrobial effect was evaluated in planktonic (free-floating) and attached (biofilms) bacteria models. The biocompatibility and regenerative properties of the nanostructured coatings were evaluated in vitro, at cellular, biochemical, and the molecular level. The obtained results show that magnetite-based nanostructured coatings functionalized with N. sativa and dicloxacillin are biocompatible and show an enhanced antimicrobial effect against Gram positive and Gram negative opportunistic bacteria

X-ray Crystal Structure, Geometric Isomerism, and Antimicrobial Activity of New Copper(II) Carboxylate Complexes with Imidazole Derivatives

Five new copper(II) acrylate complexes (acr is the acrylate anion: C3H3O2) with imidazole derivatives (2-methylimidazole/2-MeIm, 5-methylimidazole/5-MeIm, 2-ethylimidazole/2-EtIm) of type: cis-[Cu(2-RIm)2(acr)2]&#183;xH2O ((1): R = &#8315;CH3, x = 2; (4): R = &#8315;CH2&#8315;CH3, x = 0), trans-[Cu(2-RIm)2(acr)2] ((2): R = &#8315;CH3; (5): R = &#8315;CH2&#8315;CH3) and trans-[Cu(5-RIm)2(acr)2] ((3): R = &#8315;CH3) have been prepared and characterized by elemental analysis, Fourier Transform Infrared spectrometry (FTIR), Electron Paramagnetic Resonance (EPR), electronic reflectance spectroscopy, scanning electron microscopy, and mass spectrometry. The single crystal X-ray diffraction study of complexes (2) and (5) reveals that the copper(II) ion is located on an inversion center and show elongated octahedral geometry completed by two coplanar bidentate acrylates and two unidentate imidazole derivatives displayed in trans positions. For complex (4) the single crystal X-ray diffraction shows that the copper(II) ion is in a distorted octahedral environment which can be easily confused with a trigonal prism completed by two bidentate acrylates and two unidentate imidazole derivatives displayed in cis positions. These results indicate the fact that complexes (4) and (5) are the geometric isomers of the same compound bis(acrylate)-bis(2-ethylimidazole)-copper(II). Complexes (1) and (2), as well as (4) and (5), were produced simultaneously in the reaction of the corresponding copper(II) acrylate with imidazole derivatives in methanol solution. Furthermore, in order to be able to formulate potential applications of the obtained compounds, our next goal was to investigate the in vitro antimicrobial activity of the synthesized complexes against Gram-positive and Gram-negative bacteria, as well as fungal strains, of both clinical and ecological importance (biodeterioration of historical buildings). The trans isomers (2) and (5), followed by (4) have shown the broadest range of antimicrobial activity. In case of (1) and (2) isomers, the trans isomer (2) was significantly more active than cis (1), while the cis isomer (4) proved to be more active than trans (5). Taken together, the biological evaluation results indicate that the trans (2) was the most active complex, demonstrating its potential for the development of novel antimicrobial agents, with potential applications in the biomedical and restoration of architectural monuments fields

Innovative Self-Cleaning and Biocompatible Polyester Textiles Nano-Decorated with Fe–N-Doped Titanium Dioxide

The development of innovative technologies to modify natural textiles holds an important impact for medical applications, including the prevention of contamination with microorganisms, particularly in the hospital environment. In our study, Fe and N co-doped TiO2 nanoparticles have been obtained via the hydrothermal route, at moderate temperature, followed by short thermal annealing at 400 °C. These particles were used to impregnate polyester (PES) materials which have been evaluated for their morphology, photocatalytic performance, antimicrobial activity against bacterial reference strains, and in vitro biocompatibility on human skin fibroblasts. Microscopic examination and quantitative assays have been used to evaluate the cellular morphology and viability, cell membrane integrity, and inflammatory response. All treated PES materials specifically inhibited the growth of Gram-negative bacilli strains after 15 min of contact, being particularly active against Pseudomonas aeruginosa. PES fabrics treated with photocatalysts did not affect cell membrane integrity nor induce inflammatory processes, proving good biocompatibility. These results demonstrate that the treatment of PES materials with TiO2-1% Fe–N particles could provide novel biocompatible fabrics with short term protection against microbial colonization, demonstrating their potential for the development of innovative textiles that could be used in biomedical applications for preventing patients’ accidental contamination with microorganisms from the hospital environment