Strontium Substituted Tricalcium Phosphate Bone Cement: Short and Long‐Term Time‐Resolved Studies and In Vitro Properties

Due to a significant influence of strontium (Sr) on bone regeneration, Sr substituted beta-tricalcium phosphate (Sr-TCP) cement is prepared and investigated by short- and long-term time-resolved techniques. For short-term investigations, energy-dispersive X-ray diffraction, infrared spectroscopy, and, for the first time, terahertz time-domain spectroscopy techniques are applied. For long-term time-resolved studies, angular dispersive X-ray diffraction, scanning electron microscopy, mechanical tests, and behavior in Ringer solution are carried out. After 45 min of the cement setting, the Sr-TCP phase is no longer detectable. During this time period, an appearance and constant increase of the final brushite phase are registered. The compressive strength of the Sr-TCP cement increases from 4.5 MPa after 2 h of setting and reaches maximum at 13.3 MPa after 21 d. After cement soaking for 21 d in Ringer solution, apatite final product, with an admixture of brushite and TCP phases is detected. The cytotoxicity aspects of the prepared cement are investigated using NCTC 3T3 fibroblast cell line, and the cytocompatibility-by human dental pulp mesenchymal stem cells. The obtained results allow to conclude that the developed Sr-TCP cement is promising for biomedical applications for bone tissue

World Experience in Immunization against Noncommunicable Diseases: Successes and Vectors for Further Development

According to the World Health Organization, noncommunicable diseases (NCDs), also known as chronic diseases that do not spread from person to person, are one of the major burdens on public health and cause approximately 28 premature deaths worldwide every minute and close to 74% of deaths globally each year [...

Incorporation of Manganese (II) in Beta-Tricalcium Phosphate from EPR and ENDOR Measurements for Powders

Powders of β-tricalcium phosphate (β-TCP, Ca3PO4) doped with manganese (Mn2+) are comprehensively analyzed with electron paramagnetic resonance (EPR) and electron-nuclear double resonance (ENDOR) techniques. The modeling of the spectra permitted to calculate the values of zero-field splitting (B20 = −904 MHz; B40 = −1.41 MHz and B43 = 195.2 MHz) and explain the origin of the low-field hyperfine structures as the allowed spin transitions of fine structure. Three structurally inequivalent positions for Mn2+ in the β-TCP crystal lattice are identified and their g-factors and hyperfine constants are quantified. The obtained results can serve as fundamental background to the study of structurally disordered matrices with high spin (S ≥ 1) impurities which are important for catalytic systems

Incorporation of Manganese (II) in Beta-Tricalcium Phosphate from EPR and ENDOR Measurements for Powders

Powders of β-tricalcium phosphate (β-TCP, Ca3PO4) doped with manganese (Mn2+) are comprehensively analyzed with electron paramagnetic resonance (EPR) and electron-nuclear double resonance (ENDOR) techniques. The modeling of the spectra permitted to calculate the values of zero-field splitting (B20 = −904 MHz; B40 = −1.41 MHz and B43 = 195.2 MHz) and explain the origin of the low-field hyperfine structures as the allowed spin transitions of fine structure. Three structurally inequivalent positions for Mn2+ in the β-TCP crystal lattice are identified and their g-factors and hyperfine constants are quantified. The obtained results can serve as fundamental background to the study of structurally disordered matrices with high spin (S ≥ 1) impurities which are important for catalytic systems

Study of Tricalcium Phosphate Ceramics Doped with Gadolinium Ions with Various EPR Techniques

Tricalcium phosphate (TCP)-based materials, such as β-Ca3(PO4)2 doped with rare earth ions (RE), have shown applications as biomaterials, lighting emitting materials, scintillating materials, in vivo imaging probes, and thermoluminescent dosimeters. Their properties are found to be dependent on the distribution of RE3+ on Ca2+ sites that can be controlled by pulsed electron paramagnetic resonance (EPR) and electron spin echo envelop modulation (ESEEM) experiments. The main spectroscopic parameters (spin Hamiltonian values) of Gd3+ and nitrogen impurity centers are quantitatively determined (g-factor, the fine structure parameters D and E, the hyperfine constants A) as well as dynamic characteristics: spin–lattice T1 and spin–spin T2 relaxation times. Based on the analysis of the EPR datasets, the interatomic distance between Gd3+ and 31P was estimated in the dipole–dipole approximation. Two structurally nonequivalent Gd3+ positions in the β-TCP structure have been identified. The obtained valuable results demonstrate applicability of modern EPR techniques to characterize Gd-TCP systems despite the powder structure of the material and high electron spin S = 7/2 of Gd3+ ions

Composite Polyvinylpyrrolidone–Sodium Alginate—Hydroxyapatite Hydrogel Films for Bone Repair and Wound Dressings Applications

Today, the synthesis of biocompatible and bioresorbable composite materials such as “polymer matrix-mineral constituent,” which stimulate the natural growth of living tissues and the restoration of damaged parts of the body, is one of the challenging problems in regenerative medicine. In this study, composite films of bioresorbable polymers of polyvinylpyrrolidone (PVP) and sodium alginate (SA) with hydroxyapatite (HA) were obtained. HA was introduced by two different methods. In one of them, it was synthesized in situ in a solution of polymer mixture, and in another one, it was added ex situ. Phase composition, microstructure, swelling properties and biocompatibility of films were investigated. The crosslinked composite PVP-SA-HA films exhibit hydrogel swelling characteristics, increasing three times in mass after immersion in a saline solution. It was found that composite PVP-SA-HA hydrogel films containing HA synthesized in situ exhibited acute cytotoxicity, associated with the presence of HA synthesis reaction byproducts—ammonia and ammonium nitrate. On the other hand, the films with HA added ex situ promoted the viability of dental pulp stem cells compared to the films containing only a polymer PVP-SA blend. The developed composite hydrogel films are recommended for such applications, such as membranes in osteoplastic surgery and wound dressing

Polyvinylpyrrolidone–Alginate Film Barriers for Abdominal Surgery: Anti-Adhesion Effect in Murine Model

Surgical operations on the peritoneum are often associated with the formation of adhesions, which can interfere with the normal functioning of the internal organs. The effectiveness of existing barrier materials is relatively low. In this work, the effectiveness of soluble alginate–polyvinylpyrrolidone (PVP-Alg) and non-soluble Ca ion cross-linked (PVP-Alg-Ca) films in preventing these adhesions was evaluated. Experiments in vivo were performed on mice via mechanical injury to the adjacent peritoneum wall and the caecum, followed by the application of PVP-Alg or PVP-Alg-Ca films to the injured area. After 7 days, samples from the peritoneal wall and caecum were analyzed using histology and quantitative polymerase chain reaction (qPCR). It was shown that the expression of genes responsible for adhesion formation in the caecum in the PVP-Alg group was comparable to that in the control group, while in the PVP-Alg-Ca group, it increased by 5–10 times. These results were consistent with the histology: in the PVP-Alg group, the adhesions did not form, while in the PVP-Alg-Ca group, the adhesions corresponded to five points on the adhesion scale. Therefore, the formation of intraperitoneal adhesions can be effectively prevented by non-crosslinked, biodegradable PVP-Alg films, whereas cross-linked, not biodegradable PVP-Alg-Ca films cause inflammation and adhesion formation

The Role of Chloroviruses as Possible Infectious Agents for Human Health: Putative Mechanisms of ATCV-1 Infection and Potential Routes of Transmission

The Chlorovirus genus of the Phycodnaviridae family includes large viruses with a double-stranded DNA genome. Chloroviruses are widely distributed in freshwater bodies around the world and have been isolated from freshwater sources in Europe, Asia, Australia, and North and South America. One representative of chloroviruses is Acanthocystis turfacea chlorella virus 1 (ATCV-1), which is hosted by Chlorella heliozoae. A few publications in the last ten years about the potential effects of ATCV-1 on the human brain sparked interest among specialists in the field of human infectious pathology. The goal of our viewpoint was to compile the scant research on the effects of ATCV-1 on the human body, to demonstrate the role of chloroviruses as new possible infectious agents for human health, and to indicate potential routes of virus transmission. We believe that ATCV-1 transmission routes remain unexplored. We also question whether chlorella-based nutritional supplements are dangerous for ATCV-1 infections. Further research will help to identify the routes of infection, the cell types in which ATCV-1 can persist, and the pathological mechanisms of the virus’s effect on the human body

Polyvinylpyrrolidone—Alginate—Carbonate Hydroxyapatite Porous Composites for Dental Applications

An alternative approach for the currently used replacement therapy in dentistry is to apply materials that restore tooth tissue. Among them, composites, based on biopolymers with calcium phosphates, and cells can be applied. In the present work, a composite based on polyvinylpyrrolidone (PVP) and alginate (Alg) with carbonate hydroxyapatite (CHA) was prepared and characterized. The composite was investigated by X-ray diffraction, infrared spectroscopy, electron paramagnetic resonance (EPR) and scanning electron microscopy methods, and the microstructure, porosity, and swelling properties of the material were described. In vitro studies included the MTT test using mouse fibroblasts, and adhesion and survivability tests with human dental pulp stem cells (DPSC). The mineral component of the composite corresponded to CHA with an admixture of amorphous calcium phosphate. The presence of a bond between the polymer matrix and CHA particles was shown by EPR. The structure of the material was represented by micro- (30–190 μm) and nano-pores (average 8.71 ± 4.15 nm). The swelling measurements attested that CHA addition increased the polymer matrix hydrophilicity by 200%. In vitro studies demonstrated the biocompatibility of PVP-Alg-CHA (95 ± 5% cell viability), and DPSC located inside the pores. It was concluded that the PVP-Alg-CHA porous composite is promising for dentistry applications

Antibacterial Composite Material Based on Polyhydroxybutyrate and Zn-Doped Brushite Cement

A composite material based on electrospinning printed polyhydroxybutyrate fibers impregnated with brushite cement containing Zn substitution was developed for bone implant applications. Powder X-ray Diffraction (PXRD), Fourier Transform Infrared Spectroscopy and Scanning Electron Microscopy were applied for materials characterization. Soaking the composite in Ringer’s solution led to the transformation of brushite into apatite phase, accompanied by the morphology changes of the material. The bending strength of the composite material was measured to be 3.1 ± 0.5 MPa. NCTC mouse fibroblast cells were used to demonstrate by means of the MTT test that the developed material was not cytotoxic. The behavior of the human dental pulp stem cells on the surface of the composite material investigated by the direct contact method was similar to the control. It was found that the developed Zn containing composite material possessed antibacterial properties, as testified by microbiology investigations against bacteria strains of Escherichia coli and Staphylococcus aureus. Thus, the developed composite material is promising for the treatment of damaged tissues with bacterial infection complications