High-resolution three-dimensional hybrid MRI + low dose CT vocal tract modeling:A cadaveric pilot study

SummaryObjectivesMRI based vocal tract models have many applications in voice research and education. These models do not adequately capture bony structures (e.g. teeth, mandible), and spatial resolution is often relatively low in order to minimize scanning time. Most MRI sequences achieve 3D vocal tract coverage at gross resolutions of 2 mm3 within a scan time of <20 seconds. Computed tomography (CT) is well suited for vocal tract imaging, but is infrequently used due to the risk of ionizing radiation. In this cadaveric study, a single, extremely low-dose CT scan of the bony structures is blended with accelerated high-resolution (1 mm3) MRI scans of the soft tissues, creating a high-resolution hybrid CT-MRI vocal tract model.MethodsMinimum CT dosages were determined and a custom 16-channel airway receiver coil for accelerated high (1 mm3) resolution MRI was evaluated. A rigid body landmark based partial volume registration scheme was then applied to the images, creating a hybrid CT-MRI model that was segmented in Slicer.ResultsUltra-low dose CT produced images with sufficient quality to clearly visualize the bone, and exposed the cadaver to 0.06 mSv. This is comparable to atmospheric exposures during a round trip transatlantic flight. The custom 16-channel vocal tract coil produced acceptable image quality at 1 mm3 resolution when reconstructed from ∼6 fold undersampled data. High (1 mm3) resolution MR imaging of short (<10 seconds) sustained sounds was achieved. The feasibility of hybrid CT-MRI vocal tract modeling was successfully demonstrated using the rigid body landmark based partial volume registration scheme. Segmentations of CT and hybrid CT-MRI images provided more detailed 3D representations of the vocal tract than 2 mm3 MRI based segmentations.ConclusionsThe method described in this study indicates that high-resolution CT and MR image sets can be combined so that structures such as teeth and bone are accurately represented in vocal tract reconstructions. Such scans will aid learning and deepen understanding of anatomical features that relate to voice production, as well as furthering knowledge of the static and dynamic functioning of individual structures relating to voice production

A Cervid Vocal Fold Model Suggests Greater Glottal Efficiency in Calling at High Frequencies

Male Rocky Mountain elk (Cervus elaphus nelsoni) produce loud and high fundamental frequency bugles during the mating season, in contrast to the male European Red Deer (Cervus elaphus scoticus) who produces loud and low fundamental frequency roaring calls. A critical step in understanding vocal communication is to relate sound complexity to anatomy and physiology in a causal manner. Experimentation at the sound source, often difficult in vivo in mammals, is simulated here by a finite element model of the larynx and a wave propagation model of the vocal tract, both based on the morphology and biomechanics of the elk. The model can produce a wide range of fundamental frequencies. Low fundamental frequencies require low vocal fold strain, but large lung pressure and large glottal flow if sound intensity level is to exceed 70 dB at 10 m distance. A high-frequency bugle requires both large muscular effort (to strain the vocal ligament) and high lung pressure (to overcome phonation threshold pressure), but at least 10 dB more intensity level can be achieved. Glottal efficiency, the ration of radiated sound power to aerodynamic power at the glottis, is higher in elk, suggesting an advantage of high-pitched signaling. This advantage is based on two aspects; first, the lower airflow required for aerodynamic power and, second, an acoustic radiation advantage at higher frequencies. Both signal types are used by the respective males during the mating season and probably serve as honest signals. The two signal types relate differently to physical qualities of the sender. The low-frequency sound (Red Deer call) relates to overall body size via a strong relationship between acoustic parameters and the size of vocal organs and body size. The high-frequency bugle may signal muscular strength and endurance, via a ‘vocalizing at the edge’ mechanism, for which efficiency is critical

Adapted to Roar: Functional Morphology of Tiger and Lion Vocal Folds

Vocal production requires active control of the respiratory system, larynx and vocal tract. Vocal sounds in mammals are produced by flow-induced vocal fold oscillation, which requires vocal fold tissue that can sustain the mechanical stress during phonation. Our understanding of the relationship between morphology and vocal function of vocal folds is very limited. Here we tested the hypothesis that vocal fold morphology and viscoelastic properties allow a prediction of fundamental frequency range of sounds that can be produced, and minimal lung pressure necessary to initiate phonation. We tested the hypothesis in lions and tigers who are well-known for producing low frequency and very loud roaring sounds that expose vocal folds to large stresses. In histological sections, we found that the Panthera vocal fold lamina propria consists of a lateral region with adipocytes embedded in a network of collagen and elastin fibers and hyaluronan. There is also a medial region that contains only fibrous proteins and hyaluronan but no fat cells. Young's moduli range between 10 and 2000 kPa for strains up to 60%. Shear moduli ranged between 0.1 and 2 kPa and differed between layers. Biomechanical and morphological data were used to make predictions of fundamental frequency and subglottal pressure ranges. Such predictions agreed well with measurements from natural phonation and phonation of excised larynges, respectively. We assume that fat shapes Panthera vocal folds into an advantageous geometry for phonation and it protects vocal folds. Its primary function is probably not to increase vocal fold mass as suggested previously. The large square-shaped Panthera vocal fold eases phonation onset and thereby extends the dynamic range of the voice

Principles of voice production

xxiv, 354 p.; 23 cm

Voice Simulation: The Next Generation

Simulation of the acoustics and biomechanics of sound production in humans and animals began half a century ago. The three major components are the mechanics of tissue under self-sustained oscillation, the transport of air from the lungs to the lips, and the propagation of sound in the airways. Both low-dimensional and high-dimensional computer models have successfully predicted control of pitch, loudness, spectral content, vowel production, and many other features of speaking and singing. However, the problems of computational efficiency, validity, and accuracy have not been adequately addressed. Low-dimensional models are often more revealing of nonlinear phenomena in coupled oscillators, but the simplifying assumptions are not always validated. High-dimensional models can provide more accuracy, but interpretations of results are sometimes clouded by computational redundancy and uncertainty of parameters. The next generation will likely combine pre-calculations and machine learning with abbreviated critical calculations