246 research outputs found
Predicting the Debonding of CAD/CAM Composite Resin Crowns with AI
A preventive measure for debonding has not been established and is highly desirable to improve the survival rate of computer-aided design/computer-aided manufacturing (CAD/CAM) composite resin (CR) crowns. The aim of this study was to assess the usefulness of deep learning with a convolution neural network (CNN) method to predict the debonding probability of CAD/CAM CR crowns from 2-dimensional images captured from 3-dimensional (3D) stereolithography models of a die scanned by a 3D oral scanner. All cases of CAD/CAM CR crowns were manufactured from April 2014 to November 2015 at the Division of Prosthodontics, Osaka University Dental Hospital (Ethical Review Board at Osaka University, approval H27-E11). The data set consisted of a total of 24 cases: 12 trouble-free and 12 debonding as known labels. A total of 8,640 images were randomly divided into 6,480 training and validation images and 2,160 test images. Deep learning with a CNN method was conducted to develop a learning model to predict the debonding probability. The prediction accuracy, precision, recall, F-measure, receiver operating characteristic, and area under the curve of the learning model were assessed for the test images. Also, the mean calculation time was measured during the prediction for the test images. The prediction accuracy, precision, recall, and F-measure values of deep learning with a CNN method for the prediction of the debonding probability were 98.5%, 97.0%, 100%, and 0.985, respectively. The mean calculation time was 2 ms/step for 2,160 test images. The area under the curve was 0.998. Artificial intelligence (AI) technology—that is, the deep learning with a CNN method established in this study—demonstrated considerably good performance in terms of predicting the debonding probability of a CAD/CAM CR crown with 3D stereolithography models of a die scanned from patients.Yamaguchi S., Lee C., Karaer O., et al. Predicting the Debonding of CAD/CAM Composite Resin Crowns with AI. Journal of Dental Research, 98(11), 1234-1238. © 2019 Sage Publications. DOI: 10.1177/0022034519867641
A nanoleakage perspective on bonding to oxidized dentin
The mechanism responsible for sodium-hypochlorite-induced reduction in dentin bond strength and its reversal with reducing agents is unknown. This study examined the relationship between nanoleakage and reversal of compromised bonding to oxidized dentin. Acid-etched dentin was completely depleted of demineralized collagen matrix when sodium hypochlorite was used. Specimens were bonded with two single-bottle dentin adhesives. They were immersed in ammoniacal silver nitrate for 24 hrs before being processed for transmission electron microscopy. For both adhesives, tensile bond strengths of acid-etched dentin were significantly reduced after sodium hypochlorite treatment, but were reversed when sodium ascorbate was used. After sodium hypochlorite application, reticular nanoleakge patterns in hybrid layers were replaced by vertical, shag-carpet-like patterns along the demineralization front. This type of nanoleakage was completely eliminated after sodium ascorbate treatment with the materials tested. Residual sodium hypochlorite within the porosities of mineralized dentin may result in incomplete resin polymerization, and hence compromised bond strength.published_or_final_versio
Measurement of direct photon emission in decay using stopped positive kaons
The radiative decay () has
been measured with stopped positive kaons. A sample
containing 4k events was analyzed, and the branching ratio
of the direct photon emission process was determined to be . No interference pattern with internal
bremsstrahlung was observed.Comment: 12 pages, 6 figures, 2 tables, to be published in Phys. Lett.
Tubular occlusion prevents water-treeing and through-and-through fluid movement in a single-bottle, one-step self-etch adhesive model
Water entrapment occurs at resin-dentin interfaces of one-step self-etch adhesives. We hypothesized that by preventing water fluxes from dentin, any water entrapment would be attributed to incomplete removal of adhesive solvents. We tested this hypothesis by bonding to transparent carious dentin containing occluded dentinal tubules. An experimental single-bottle, one-step self-etch adhesive was applied to flat surfaces of caries-affected dentin surrounded by sound dentin, with or without pulpal pressure. Resin-dentin interfaces were examined with TEM after silver-impregnation. Although caries-affected dentin was highly porous, adhesive layers were devoid of silver deposits when tubules were occluded. Conversely, variable extents of water-treeing and water-droplets were identified from adhesive layers in bonded sound dentin. Water-treeing and water-droplet formation, being manifestations of evaporative and convective water fluxes, can be eliminated during bonding to occluded transparent carious dentin. However, the highly porous nature of this clinically relevant substrate after bonding may lead to potentially undesirable consequences.published_or_final_versio
Экономическая безопасность функционирования предприятия в условиях сетевой экономики
В наше время возникновение сетевых особенностей в экономике связывают с развитием информационных технологий, что приводит к эволюции современных экономических систем, развитию нерыночных механизмов регулирования и сетевых организационных структур. Другими словами, сетевые экономические отношения играют особую роль в процессе координации экономических взаимодействий. Данные изменения обостряют проблему экономической безопасности предприятия в условиях развития межорганизационных взаимодействий формального и неформального характера с позиции сетевой экономики
Effects of agitation of self-etching primers/adhesives on resin-dentin bond strength
Abstract no. 1683published_or_final_versio
Effects of agitation of self-etching primers/adhesives on resin-dentin bond strength
Abstract no. 1683published_or_final_versio
Measurement of K^+ \to \pi^0 \mu^+ \nu \gamma decay using stopped kaons
The K^+ \to \pi^0 \mu^+ \nu \gamma () decay has been
measured with stopped positive kaons at the KEK 12 GeV proton synchrotron. A
sample containing 125 events was obtained. The partial
branching ratio was found to be , which is in good agreement with theoretical predictions.Comment: 12 pages, 3 figures, to be published in Physics Letters
In vitro fatigue tests and in silico finite element analysis of dental implants with different fixture/abutment joint types using computer-aided design models
Purpose The aim of this study was to evaluate fatigue resistance of dental fixtures with two different fixture-abutment connections by in vitro fatigue testing and in silico three-dimensional finite element analysis (3D FEA) using original computer-aided design (CAD) models. Methods Dental implant fixtures with external connection (EX) or internal connection (IN) abutments were fabricated from original CAD models using grade IV titanium and step-stress accelerated life testing was performed. Fatigue cycles and loads were assessed by Weibull analysis, and fatigue cracking was observed by micro-computed tomography and a stereomicroscope with high dynamic range software. Using the same CAD models, displacement vectors of implant components were also analyzed by 3D FEA. Angles of the fractured line occurring at fixture platforms in vitro and of displacement vectors corresponding to the fractured line in silico were compared by two-way ANOVA. Results Fatigue testing showed significantly greater reliability for IN than EX (p < 0.001). Fatigue crack initiation was primarily observed at implant fixture platforms. FEA demonstrated that crack lines of both implant systems in vitro were observed in the same direction as displacement vectors of the implant fixtures in silico. Conclusions In silico displacement vectors in the implant fixture are insightful for geometric development of dental implants to reduce complex interactions leading to fatigue failure.Yamaguchi S., Yamanishi Y., Machado L.S., et al. In vitro fatigue tests and in silico finite element analysis of dental implants with different fixture/abutment joint types using computer-aided design models. Journal of Prosthodontic Research 62, 24 (2018); https://doi.org/10.1016/j.jpor.2017.03.006
- …