Design of Titanium Alloys Insensitive to Thermal History for Additive Manufacturing

Powder bed fusion is the most common technology used for 3D printing, where thermal energy is used to selectively melt/sinter granular materials into solid shapes. The build platform is then lowered, more powder is added, and the process is repeated for the next layer to fully print the design. As a result, the built-up part is repeatedly heated. Therefore, materials that are not sensitive to thermal history are preferred for this process. The Ti–Zr system forms a continuous solid solution for both β- and α-phases. The presence of Fe in Ti alloys is inevitable; however, it provides some beneficial effects. The purpose of this work was to prepare Ti–Zr–Fe alloys and investigate their heat treatment behaviour. Ti-xmass%Zr-1mass%Fe alloys (x = 0, 5, 10) were prepared with arc melting. The formation of a solid solution of Zr in Ti was confirmed on the basis of X-ray diffraction peak shifts and hardening effects. A small amount of β-phase precipitation was suggested by the change in electrical resistivity after isothermal ageing at 673 and 773 K. However, no obvious phase or microstructural changes were observed. The laser scanning increased the volume of the precipitates and also coarsened them, but the effect was limited.Ueda M., Ting Hsuan C., Ikeda M., et al. Design of Titanium Alloys Insensitive to Thermal History for Additive Manufacturing. Crystals 13, 568 (2023); https://doi.org/10.3390/cryst13040568

A novel atrial volume reduction technique to enhance the Cox maze procedure: Initial results

ObjectiveLarge left atrial diameter is reported to be a predictor for recurrent atrial fibrillation after the Cox maze procedure, and left atrial diameter by itself influences the chance of sinus rhythm recovery, as well as maintenance of sinus rhythm. However, additional cut-and-sew procedures to decrease left atrial diameter extend operative time and can cause bleeding. Thus we developed a no-bleeding, faster, and therefore less invasive left atrial volume reduction technique to enhance the Cox maze procedure.MethodsThe modified Cox maze III procedure with cryoablation or the left atrial maze procedure in association with mitral valve surgery was performed in 80 patients with atrial fibrillation and enlarged left atria (≥60 mm). Among them, 44 patients had the concomitant volume reduction technique (VR group); continuous horizontal mattress sutures for left atrial plication were placed on the left atrial wall along the pulmonary vein isolation line. Cryoablation was applied to the suture line so that the plicated left atrium is anatomically and electrically isolated. Another 36 patients did not have the volume reduction technique (control group).ResultsThe VR group had preoperative left atrial diameters similar to those of the control group (67.1 ± 7.8 vs 64.5 ± 6.7 mm) and a longer preoperative duration of atrial fibrillation (14.1 ± 5.4 vs 9.5 ± 5.1 years, P < .05) but had smaller postoperative left atrial diameters (47.6 ± 6.3 vs 62.1 ± 7.9 mm, P < .01). There were no differences in mean crossclamp/bypass time and chest tube drainage for 12 hours between the groups. Twelve months after surgical intervention, the sinus rhythm recovery rate of the VR group was better than that of the control group (90% vs 69%, P < .05).ConclusionsEven in patients with long-standing atrial fibrillation and an enlarged left atrium, maze procedures concomitant with the novel left atrial volume reduction technique improved the sinus rhythm recovery rate without increasing complications. Although further study with a larger number of patients and a longer follow-up period is needed, this safe and thus far potent technique that catheter-based ablation cannot copy might extend indication of the Cox maze procedure for patients with tough atrial fibrillation

Magnetostriction studies up to megagauss fields using fiber Bragg grating technique

We here report magnetostriction measurements under pulsed megagauss fields using a high-speed 100 MHz strain monitoring system devised using fiber Bragg grating (FBG) technique with optical filter method. The optical filter method is a detection scheme of the strain of FBG, where the changing Bragg wavelength of the FBG reflection is converted to the intensity of reflected light to enable the 100 MHz measurement. In order to show the usefulness and reliability of the method, we report the measurements for solid oxygen, spin-controlled crystal, and volborthite, a deformed Kagom\'{e} quantum spin lattice, using static magnetic fields up to 7 T and non-destructive millisecond pulse magnets up to 50 T. Then, we show the application of the method for the magnetostriction measurements of CaV$_{4}$O$_{9}$, a two-dimensional antiferromagnet with spin-halves, and LaCoO$_{3}$, an anomalous spin-crossover oxide, in the megagauss fields.Comment: 9pages, 6 figures, Conference proceedings for MegaGauss16 at Kashiwa, Japan in Sept. 201

Interrupted aortic arch without differential cyanosis due to aberrant subclavian artery

Differential cyanosis indicates a lower percutaneous oxygen saturation （SpO2） level in the lower extremities than in the upper extremities and is generally observed in patients with interrupted aortic arch （IAA）. We report a case of the absence of differential cyanosis in a neonate with IAA. A male neonate was born at 38weeks of gestation. Despite routine care, his SpO2 level dropped to 90％ at 1h after birth. On admission, there was no evidence of differential cyanosis. Systolic murmur was noted 12h after birth, leading to suspicion of IAA on echocardiography; IAA type B was confirmed by computed tomography. IAA type B occurs between the left carotid artery and left subclavian artery. In our patient, the levels of SpO2 were different between the ear and lower extremities without signs of differential cyanosis because his right subclavian artery branched from the aorta distal to the interruption and left subclavian artery. In conclusion, despite the absence of differential cyanosis and lack of detailed echocardiographic evaluation, careful observation is mandatory. SpO2 measurement in the ear is important to rule out IAA