WiFi-based urban localisation using CNNs

IEEE Conference on Intelligent Transportation Systems - ITSC 2019, 27-30/10/2019, Auckland, Nueva Zelanda.The continuous expanding scale of WiFi deployments in metropolitan areas has made possible to find WiFi access points at almost any place in our cities. Although WiFi has been mainly used for indoor localisation, there is a growing number of research in outdoor WiFi-based localisation. This paper presents a WiFi-based localisation system that takes advantage of the huge deployment of WiFi networks in urban areas. The idea is to complement localisation in zones where the GPS coverage is low, such as urban canyons. The proposed method explores the CNNs ability to handle large amounts of data and their high accuracy with reasonable computational costs. The final objective is to develop a system able to handle the large number of access points present in urban areas while preserving high accuracy and real time requirements. The system was tested in a urban environment, improving the accuracy with respect to the state-of-the-art and being able to work in real time

Simple Baseline for Vehicle Pose Estimation: Experimental Validation

Significant progress on human and vehicle pose estimation has been achieved in recent years. The performance of these methods has evolved from poor to remarkable in just a couple of years. This improvement has been obtained from increasingly complex architectures. In this paper, we explore the applicability of simple baseline methods by adding a few deconvolutional layers on a backbone network to estimate heat maps that correspond to the vehicle keypoints. This approach has been proven to be very effective for human pose estimation. The results are analyzed on the PASCAL3DC dataset, achieving state-of-the-art results. In addition, a set of experiments has been conducted to study current shortcomings in vehicle keypoints labelling, which adversely affect performance. A new strategy for de ning vehicle keypoints is presented and validated with our customized dataset with extended keypoints

Fail-aware LIDAR-based odometry for autonomous vehicles

Autonomous driving systems are set to become a reality in transport systems and, so, maximum acceptance is being sought among users. Currently, the most advanced architectures require driver intervention when functional system failures or critical sensor operations take place, presenting problems related to driver state, distractions, fatigue, and other factors that prevent safe control. Therefore, this work presents a redundant, accurate, robust, and scalable LiDAR odometry system with fail-aware system features that can allow other systems to perform a safe stop manoeuvre without driver mediation. All odometry systems have drift error, making it difficult to use them for localisation tasks over extended periods. For this reason, the paper presents an accurate LiDAR odometry system with a fail-aware indicator. This indicator estimates a time window in which the system manages the localisation tasks appropriately. The odometry error is minimised by applying a dynamic 6-DoF model and fusing measures based on the Iterative Closest Points (ICP), environment feature extraction, and Singular Value Decomposition (SVD) methods. The obtained results are promising for two reasons: First, in the KITTI odometry data set, the ranking achieved by the proposed method is twelfth, considering only LiDAR-based methods, where its translation and rotation errors are 1.00% and 0.0041 deg/m, respectively. Second, the encouraging results of the fail-aware indicator demonstrate the safety of the proposed LiDAR odometry system. The results depict that, in order to achieve an accurate odometry system, complex models and measurement fusion techniques must be used to improve its behaviour. Furthermore, if an odometry system is to be used for redundant localisation features, it must integrate a fail-aware indicator for use in a safe manner

Fail-Aware LIDAR-Based Odometry for Autonomous Vehicles

Autonomous driving systems are set to become a reality in transport systems and, so, maximum acceptance is being sought among users. Currently, the most advanced architectures require driver intervention when functional system failures or critical sensor operations take place, presenting problems related to driver state, distractions, fatigue, and other factors that prevent safe control. Therefore, this work presents a redundant, accurate, robust, and scalable LiDAR odometry system with fail-aware system features that can allow other systems to perform a safe stop manoeuvre without driver mediation. All odometry systems have drift error, making it difficult to use them for localisation tasks over extended periods. For this reason, the paper presents an accurate LiDAR odometry system with a fail-aware indicator. This indicator estimates a time window in which the system manages the localisation tasks appropriately. The odometry error is minimised by applying a dynamic 6-DoF model and fusing measures based on the Iterative Closest Points (ICP), environment feature extraction, and Singular Value Decomposition (SVD) methods. The obtained results are promising for two reasons: First, in the KITTI odometry data set, the ranking achieved by the proposed method is twelfth, considering only LiDAR-based methods, where its translation and rotation errors are 1.00% and 0.0041 deg/m, respectively. Second, the encouraging results of the fail-aware indicator demonstrate the safety of the proposed LiDAR odometry system. The results depict that, in order to achieve an accurate odometry system, complex models and measurement fusion techniques must be used to improve its behaviour. Furthermore, if an odometry system is to be used for redundant localisation features, it must integrate a fail-aware indicator for use in a safe manner

Urban intersection classification: a comparative analysis

Understanding the scene in front of a vehicle is crucial for self-driving vehicles and Advanced Driver Assistance Systems, and in urban scenarios, intersection areas are one of the most critical, concentrating between 20% to 25% of road fatalities. This research presents a thorough investigation on the detection and classification of urban intersections as seen from onboard front-facing cameras. Different methodologies aimed at classifying intersection geometries have been assessed to provide a comprehensive evaluation of state-of-the-art techniques based on Deep Neural Network (DNN) approaches, including single-frame approaches and temporal integration schemes. A detailed analysis of most popular datasets previously used for the application together with a comparison with ad hoc recorded sequences revealed that the performances strongly depend on the field of view of the camera rather than other characteristics or temporal-integrating techniques. Due to the scarcity of training data, a new dataset is created by performing data augmentation from real-world data through a Generative Adversarial Network (GAN) to increase generalizability as well as to test the influence of data quality. Despite being in the relatively early stages, mainly due to the lack of intersection datasets oriented to the problem, an extensive experimental activity has been performed to analyze the individual performance of each proposed systems.European Commissio

3D Visual Odometry for Road Vehicles

This paper describes a method for estimating the vehicle global position in a network of roads by means of visual odometry. To do so, the ego-motion of the vehicle relative to the road is computed using a stereo-vision system mounted next to the rear view mirror of the car. Feature points are matched between pairs of frames and linked into 3D trajectories. Vehicle motion is estimated using the non-linear, photogrametric approach based on RANSAC. This iterative technique enables the formulation of a robust method that can ignore large numbers of outliers as encountered in real traffic scenes. The resulting method is defined as visual odometry and can be used in conjunction with other sensors, such as GPS, to produce accurate estimates of the vehicle global position. The obvious application of the method is to provide on-board driver assistance in navigation tasks, or to provide a means for autonomously navigating a vehicle. The method has been tested in real traffic conditions without using prior knowledge about the scene nor the vehicle motion. We provide examples of estimated vehicle trajectories using the proposed method and discuss the key issues for further improvement

Perception advances in outdoor vehicle detection for automatic cruise control

This paper describes a vehicle detection system based on support vector machine (SVM) and monocular vision. The final goal is to provide vehicle-to-vehicle time gap for automatic cruise control (ACC) applications in the framework of intelligent transportation systems (ITS). The challenge is to use a single camera as input, in order to achieve a low cost final system that meets the requirements needed to undertake serial production in automotive industry. The basic feature of the detected objects are first located in the image using vision and then combined with a SVMbased classifier. An intelligent learning approach is proposed in order to better deal with objects variability, illumination conditions, partial occlusions and rotations. A large database containing thousands of object examples extracted from real road scenes has been created for learning purposes. The classifier is trained using SVM in order to be able to classify vehicles, including trucks. In addition, the vehicle detection system described in this paper provides early detection of passing cars and assigns lane to target vehicles. In the paper, we present and discuss the results achieved up to date in real traffic conditions.Ministerio de Educación y Cienci

Vision-based active safety system for automatic stopping

ntelligent systems designed to reduce highway fatalities have been widely applied in the automotive sector in the last decade. Of all users of transport systems, pedestrians are the most vulnerable in crashes as they are unprotected. This paper deals with an autonomous intelligent emergency system designed to avoid collisions with pedestrians. The system consists of a fuzzy controller based on the time-to-collision estimate – obtained via a vision-based system – and the wheel-locking probability – obtained via the vehicle’s CAN bus – that generates a safe braking action. The system has been tested in a real car – a convertible Citroën C3 Pluriel – equipped with an automated electro-hydraulic braking system capable of working in parallel with the vehicle’s original braking circuit. The system is used as a last resort in the case that an unexpected pedestrian is in the lane and all the warnings have failed to produce a response from the driver

Intelligent automatic overtaking system using vision for vehicle detection

There is clear evidence that investment in intelligent transportation system technologies brings major social and economic benefits. Technological advances in the area of automatic systems in particular are becoming vital for the reduction of road deaths. We here describe our approach to automation of one the riskiest autonomous manœuvres involving vehicles – overtaking. The approach is based on a stereo vision system responsible for detecting any preceding vehicle and triggering the autonomous overtaking manœuvre. To this end, a fuzzy-logic based controller was developed to emulate how humans overtake. Its input is information from the vision system and from a positioning-based system consisting of a differential global positioning system (DGPS) and an inertial measurement unit (IMU). Its output is the generation of action on the vehicle’s actuators, i.e., the steering wheel and throttle and brake pedals. The system has been incorporated into a commercial Citroën car and tested on the private driving circuit at the facilities of our research center, CAR, with different preceding vehicles – a motorbike, car, and truck – with encouraging results