Thin polymer films based on poly(vinyl alcohol) containing graphene oxide and reduced graphene oxide with functional properties

10 pags., 7 figs., 2 tabs.In this article, the effect of the addition of graphene oxide (GO) and reduced graphene oxide (rGO) on the mechanical properties, thermal stability, and electrical conductivity of polyvinyl alcohol (PVA) has been investigated. Different weight percentages of nanofillers ranging from 0.5 to 5 wt% have been combined with PVA. The ultrasonic technique has been applied to disperse nanofillers in the PVA solution. The nanocomposite films have been prepared via solution casting technique and the dispersion of nanofillers into the PVA has been studied through optical microscopy. The microstructure, crystallization behavior, and interfacial interaction were characterized through X-ray diffraction and Fourier transform infrared spectroscopy. Differential scanning calorimetry (DSC) and thermogravimetric analysis have been applied to study the thermal properties of the prepared nanocomposites. The DSC results revealed that the crystallization temperature and melting temperature were enhanced in the presence of GO nanofiller. Besides, the tensile strength at break was improved along with the addition of GO; however, elongation at break for PVA/GO and PVA/rGO was diminished. Moreover, all specimens showed insulating behavior and the only sample was electrically conducting, which contain a high amount of rGO (5 wt%).Spanish Ministry of Science and Innovation, Grant/Award Number:PID2019-107514GB-I0

Microwave-synthesized freestanding iron-carbon nanotubes on polyester composites of woven Kevlar fibre and silver nanoparticle-decorated graphene

We synthesized Ag nanoparticle-decorated multilayered graphene nanosheets (Ag-graphene) from graphite nanoplatelets and silver nitrate through 90-100 s of microwave exposure, without the use of any mineral acids or harsh reducing agents. Fe nanoparticle-decorated carbon nanotubes (Fe-CNTs) were grown on polypyrrole (PPy) deposited on woven Kevlar fibre (WKF), using ferrocene as a catalyst, under microwave irradiation. Fe-CNTs grown on WKF and Ag-graphene dispersed in polyester resin (PES) were combined to fabricate Ag-graphene/Fe-CNT/PPy-coated WKF/PES composites by vacuum-assisted resin transfer moulding. The combined effect of Fe-CNTs and Ag-graphene in the resulting composites resulted in a remarkable enhancement of tensile properties (a 192.56% increase in strength and 100.64% increase in modulus) as well as impact resistance (a 116.33% increase). The electrical conductivity significantly increased for Ag-graphene/Fe-CNT/PPy-coated WKF/PES composites. The effectiveness of electromagnetic interference shielding, which relies strongly on the Ag-graphene content in the composites, was 25 times higher in Ag-graphene/Fe-CNT/PPy-coated WKF/PES than in neat WKF/PES composites. The current work offers a novel route for fabricating highly promising, cost effective WKF/PES composites through microwave-assisted synthesis of Fe-CNTs and Ag-graphene.ope

Influence of hybrid system of nanofillers on the functional properties of postconsumer PET-G–based nanocomposites

10 pags., 7 figs., 4 tabs.In this article, postconsumer poly (ethylene glycol-co-1,4-cyclohexanedimethanol terephthalate) (PET-G) foils have been modified with three types of carbon nanofillers that differ in size and shape, ie, multiwalled carbon nanotubes (MWCNTs), graphene nanoplatelets (GNP), and nanosized carbon black (nCB), thus enabling the reusage of recyclate in receiving new functional materials. The series of polymer hybrid nanocomposites have been prepared via a two-stage polycondensation process, be means of glycolysis of postconsumer PET-G foil, followed by polycondensation in the presence of carbon nanofillers. The scanning electron microscopy revealed that nanoadditives were uniformly dispersed into the whole volume of polymer matrix. The results present the synergistic effect of hybrid system of nanofillers in improving tensile properties of PET-G. It has been found that the incorporation of three types of carbon nanofillers has not affected the glass transition temperature of the polymer matrix. Moreover, the incorporation of carbon nanofillers, and the mixture of two, or even three of those, caused an improvement in thermal conductivity and thermal stability.National Centre for Research and Development and National Fund for Environmental Protection and Water Management, Poland, Grant/Award Numbers: GEKON2/O5/ 266860/24/2016 and GEKON2/O5/266860/ 24/201

Electrically and thermally conductive thin elastic polymer foils containing SiC nanofibers

6 pags., 6 figs.Design and experiment of polymeric nanocomposites (NCs) for photovoltaic applications with outstanding electrical and thermal properties has been investigated with the introduction of SiC nanofibers (NFs) into the poly(trimethylene terephthalate)-block-poly(tetramethylene oxide) (PTT-PTMO) copolymers. In order to enhance the electrical and thermal conductivity, different concentrations of SiC NFs, ranging from 0.1 to 3.0 wt %, have been selected to mix with PTT-PTMO via in situ polymerization method. This reaction method is an excellent choice for incorporation of high amount of SiC NFs (3 wt %) into the polymer that was confirmed by morphological studies. From dielectric spectroscopy studies a percolating behavior was confirmed at low percolation threshold (less than 2% wt %). Furthermore, the 15% increment for thermal conductivity appeared with combination of 0.5 wt % SiC NFs with PTT-PTMO copolymers, which can be affected by manufacturing process of NCs, state of nanofillers dispersion and aspect ratio of nanofillers.Sandra Paszkiewicz would like to thank for financial support from West Pomeranian University of Technology (Dean's Grant for Young Scientists). Amelia Linares and Tiberio A. Ezquerra acknowledge the financial support provided by MINECO (grant MAT2015-66443-C02-1-R).Peer Reviewe

Thermally and electrically conducting polycarbonate/elastomer blends combined with multiwalled carbon nanotubes

In this article, we have studied thermal and dielectric conductivity and morphology of polycarbonate (PC)/ethylene–propylene copolymer (EPC)/multiwalled carbon nanotubes (MWCNTs) nanocomposites. Transmission electron microscopy has been used to investigate the localization and migration of MWCNTs within the matrix. The MWCNTs were located in the PC phase and at the interface of PC and EPC. The results showed that the thermal conductivity of the PC decreased with the increasing content of EPC elastomeric particles. However, at the same time, one could observe an increase of the thermal conductivity in the polymer blends along with an addition of MWCNT. The electrical conductivity of the PC/EPC blends containing 10 wt% of EPC increased with the incorporation of MWCNTs, and the conducting paths were formed at additive content less than 0.5 wt% of MWCNT