Free Vibration and Dynamic Stability of Functionally Graded Material Plates on Elastic Foundation

The study of parametric resonance characteristics of functionally-graded material (FGM) plates on elastic foundation is proposed under biaxial in plane periodic load. Finite element method in conjunction with Hamilton’s principle is utilised to establish the governing equations in a discrete form, Floquet’s theory was applied to determine the instability regions of FGM plate resting on elastic foundation. The effects of power law index, temperature rise, and foundation coefficients on the natural frequencies and dynamic stability of the plate have been examined in detail through parametric studies. The first two natural frequencies decrease with increase in temperature and power law index values, on the contrary, these two frequencies increase with increase in the foundation constants. Increase in power law index enhances the instability of the FGM plate. Increased foundation stiffness enhances the stability of the plate. Influence of shear layer constant is more dominant compared to the Winkler foundation constant.Defence Science Journal, Vol. 65, No. 3, May 2015, pp.245-251, DOI: http://dx.doi.org/10.14429/dsj.65.862

An electrical probe of the phonon mean-free path spectrum

Most studies of the mean-free path accumulation function (MFPAF) rely on optical techniques to probe heat transfer at length scales on the order of the phonon mean-free path. In this paper, we propose and implement a purely electrical probe of the MFPAF that relies on photo-lithographically defined heater-thermometer separation to set the length scale. An important advantage of the proposed technique is its insensitivity to the thermal interfacial impedance and its compatibility with a large array of temperature-controlled chambers that lack optical ports. Detailed analysis of the experimental data based on the enhanced Fourier law (EFL) demonstrates that heat-carrying phonons in gallium arsenide have a much wider mean-free path spectrum than originally thought

Sustainable degradation of carbon tetrafluoride to non-corrosive useful products by incorporating reduced electron mediator within electro-scrubbing

The degradation of CF4 gas using existing technologies produces other types of greenhouse gas (CO2) and corrosive side products. The main aim of this study is to degrade CF4 gas at room temperature into useful products without producing corrosive side products by mediated electrochemical reduction (MER) process using an electrogenerated Cu1+[Ni2+(CN)4]1− mediator. Initial studies on the electrolytic reduction of the hetero-bimetallic complex in catholyte solution at anodized Ti cathode was monitored by oxidation/reduction potential (ORP) variation whether the Cu2+ or Ni2+ was reduced in the Cu2+[Ni2+(CN)4] and confirmed by electron spin resonance (ESR) spectroscopy the Cu1+[Ni2+(CN)4]1− formation. The concentration variation of Cu1+[Ni2+(CN)4]1− during CF4 injection demonstrated the degradation of CF4 followed the MER by electrogenerated Cu1+[Ni2+(CN)4]1−. Maximum removal efficiency of CF4 using electroscrubbing process was 96% at room temperature. Through the variation in gas phase parameters, the gas phase mass transfer coefficient was calculated that can facilitate scale up the developed process. Fourier transform infrared spectroscopy analysis in both the gas and solution phases showed that CH3CH2OH was the main product that formed during the removal of CF4 by electrogenerated Cu1+[Ni2+(CN)4]1− at electroscrubber along with a small amount of CF3CH3 intermediate. Importantly, this mechanism also avoided formation of the corrosive product HF

A self-branched lamination of hierarchical patronite nanoarchitectures on carbon fiber cloth as novel electrode for ionic liquid electrolyte-based high energy density supercapacitors

This is the peer reviewed version of the following article: Ramu, M., Chellan, J. R., Goli, N., Joaquim, P., Cristobal, V., Kim, B. C., A Self‐Branched Lamination of Hierarchical Patronite Nanoarchitectures on Carbon Fiber Cloth as Novel Electrode for Ionic Liquid Electrolyte‐Based High Energy Density Supercapacitors. Adv. Funct. Mater. 2019, 1906586. https://doi.org/10.1002/adfm.201906586, which has been published in final form at https://doi.org/10.1002/adfm.201906586. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions.The developments of rationally designed binder-free metal chalcogenides decorated flexible electrodes are of paramount importance for advanced energy storage devices. Herein, binder-free patronite (VS4) flower-like nanostructures are facilely fabricated on a carbon cloth (CC) using a facile hydrothermal method for high-performance supercapacitors. The growth density and morphology of VS4 nanostructures on CC are also controlled by varying the concentrations of vanadium and sulfur sources along with the complexing agent in the growth solution. The optimal electrode with an appropriate growth concentration (VS4-CC@VS-3) demonstrates a considerable pseudocapacitance performance in the ionic liquid (IL) electrolyte (1-ethyl-3-methylimidazolium trifluoromethanesulfonate), with a high operating potential of 2 V. Utilizing VS4-CC@VS-3 as both positive and negative electrodes, the IL-based symmetric supercapacitor is assembled, which demonstrates a high areal capacitance of 536 mF cm-2 (206 F g-1) and excellent cycling durability (93%) with superior energy and power densities of 74.4 µWh cm-2 (28.6 Wh kg-1) and 10154 µW cm-2 (9340 W kg-1), respectively. As for the high energy storage performance, the device stably energizes various portable electronic applications for a long time, which make the fabricated composite material open up news for the fabrication of fabrics supported binder-free chalcogenides for high-performance energy storage devices.Peer ReviewedPostprint (author's final draft

Electrochemically generated bimetallic reductive mediator Cu1+ [Ni2+ (CN) 4] 1− for the degradation of CF4 to ethanol by electro-scrubbing

Remediation of electronic gas CF4 using commercially available technologies results in another kind of greenhouse gas and corrosive side products. This investigation aimed to develop CF4 removal at room temperature with formation of useful product by attempting an electrogenerated Cu1+[Ni2+(CN)4]1− mediator. The initial electrolysis of the bimetallic complex at the anodized Ti cathode demonstrated Cu1+[Ni2+(CN)4]1− formation, which was confirmed by additional electron spin resonance results. The degradation of CF4 followed mediated electrochemical reduction by electrogenerated Cu1+[Ni2+(CN)4]1−. The removal efficiency of CF4 of 95% was achieved by this electroscrubbing process at room temperature. The spectral results of online and offline Fourier transform infrared analyzer, either in gas or in solution phase, demonstrated that the product formed during the removal of CF4 by electrogenerated Cu1+[Ni2+(CN)4]1− by electroscrubbing was ethanol (CH3CH2OH), with a small amount of trifluoroethane (CF3CH3) intermediate

Validation of Concentric Rings Method as a Topographic Measure of Retinal Nonperfusion in Ultra-Widefield Fluorescein Angiography

PURPOSE: To validate the use of concentric rings as a method to measure topographic area of retinal nonperfusion in ultra-widefield angiography with the ischemic index method, which is the most frequently used method to measure nonperfusion in ultra-widefield angiography. DESIGN: Validation study and reliability analysis. METHODS: setting: Single-center study performed at National Institute for Health Research Moorfields Biomedical Research Centre, London, United Kingdom. STUDY POPULATION: Twenty-eight ultra-widefield angiogram images of eyes with central retinal vein occlusion. OBSERVATION PROCEDURE: The concentric rings method consists of 6 macula-centered concentric rings divided into 12 segments each. Each image was graded by 5 graders using both the concentric rings and the ischemic index methods. MAIN OUTCOME MEASURES: Agreement between the 2 methods was calculated using the intraclass correlation coefficient. Intertest agreement, intergrader agreement, test-retest reliability, and the time taken to grade using these 2 methods were compared. RESULTS: The intertest agreement between concentric rings method and ischemic index method was 0.965. The intergrader agreement was 0.910 for the concentric rings method and 0.898 with the ischemic index method. The test-retest reliability was 0.975 for the rings and 0.979 for the ischemic index. Average grading time per image was 187 s and 297 s for the concentric rings method and ischemic index method, respectively, P < .001. CONCLUSION: The concentric rings method has an "almost-perfect" intergrader agreement and intertest agreement with the ischemic index method, with a shorter grading time

Sustainable removal of N2O by mediated electrocatalytic reduction at ambient temperature electro-scrubbing using electrogenerated Ni(I) electron mediator

Direct catalysis is generally proposed for nitrous oxide (N2O) abatement but catalysis is expensive, requires high temperatures, and suffers from media fouling, which limits its lifetime. In the present study, an ambient temperature electroscrubbing method was developed, coupling wet-scrubbing with an electrogenerated Ni(I) ([Ni(I)(CN)4]3−) mediator, to enable N2O reduction in a single process stage. The initial studies of 10 ppm N2O absorption into 9 M KOH and an electrolyzed 9 M KOH solution showed no removal. However, 95% N2O removal was identified through the addition of Ni(I) to an electrolyzed 9 M KOH. A change in the oxidation/reduction potential from −850 mV to −650 mV occurred following a decrease in Ni(I) concentration from 4.6 mM to 4.0 mM, which confirmed that N2O removal was mediated by an electrocatalytic reduction (MER) pathway. Online analysis identified the reaction product to be ammonia (NH3). Increasing the feed N2O concentration increased NH3 formation, which suggests that a decrease in electrolyzed solution reactivity induced by the increased N2O load constrained the side reaction with the carrier gas. Importantly, this study outlines a new regenerable method for N2O removal to commodity product NH3 at ambient temperature that fosters process intensification, overcomes the limitations generally observed with catalysis, and permits product transformation to NH3

A new antibiotic with potent activity targets MscL

The growing problem of antibiotic-resistant bacteria is a major threat to human health. Paradoxically, new antibiotic discovery is declining, with most of the recently approved antibiotics corresponding to new uses for old antibiotics or structurally similar derivatives of known antibiotics. We used an in silico approach to design a new class of nontoxic antimicrobials for the bacteria-specific mechanosensitive ion channel of large conductance, MscL. One antimicrobial of this class, compound 10, is effective against methicillin-resistant Staphylococcus aureus with no cytotoxicity in human cell lines at the therapeutic concentrations. As predicted from in silico modeling, we show that the mechanism of action of compound 10 is at least partly dependent on interactions with MscL. Moreover we show that compound 10 cured a methicillin-resistant S. aureus infection in the model nematode Caenorhabditis elegans. Our work shows that compound 10, and other drugs that target MscL, are potentially important therapeutics against antibiotic-resistant bacterial infections.Irene Iscla, Robin Wray, Paul Blount, Jonah Larkins-Ford, Annie L Conery, Frederick M Ausubel, Soumya Ramu, Angela Kavanagh, Johnny X Huang, Mark A Blaskovich, Matthew A Cooper, Andres Obregon-Henao, Ian Orme, Edwin S Tjandra, Uwe H Stroeher, Melissa H Brown, Cindy Macardle, Nick van Holst, Chee Ling Tong, Ashley D Slattery, Christopher T Gibson, Colin L Raston and Ramiz A Boulo

Maternal proviral load and vertical transmission of Human T cell Lymphotropic Virus type 1 in Guinea-Bissau

The relative importance of routes of transmission of human T cell lymphotropic virus type 1 (HTLV-1) in Guinea-Bissau is largely unknown; vertical transmission is thought to be important, but there are very few existing data. We aimed to examine factors associated with transmission in mothers and children in Guinea-Bissau, where HTLV-1 is endemic (prevalence of 5% in the adult population). A cross-sectional survey was performed among mothers and their children (aged <15 years) in a rural community in Guinea-Bissau. A questionnaire to identify risk factors for infection and a blood sample were obtained. HTLV-1 proviral load in peripheral blood was determined and PCR was performed to compare long terminal repeat (LTR) sequences in mother-child pairs. Fourteen out of 55 children (25%) of 31 HTLV-1-infected mothers were infected versus none of 70 children of 30 uninfected mothers. The only factor significantly associated with HTLV-1 infection in the child was the proviral load of the mother; the risk of infection increased significantly with the log(10) proviral load in the mother's peripheral blood (OR 5.5, 95% CI 2.1-14.6, per quartile), adjusted for weaning age and maternal income. HTLV-1 sequences of the LTR region obtained from mother-child pairs were identical within pairs but differed between the pairs. Vertical transmission plays an important role in HTLV-1 transmission in this community in Guinea-Bissau. The risk of transmission increases with the mother's proviral load in the peripheral blood. Identical sequences in mother-child pairs give additional support to the maternal source of the children's infectio

Genome-Wide Association Mapping of Correlated Traits in Cassava: Dry Matter and Total Carotenoid Content

Article purchased; Published online: 3 August 2017Cassava (Manihot esculenta (L.) Crantz) is a starchy root crop cultivated in the tropics for fresh consumption and commercial processing. Dry matter content and micronutrient density, particularly of provitamin A, traits that are negatively correlated, are among the primary selection objectives in cassava breeding. This study aimed at identifying genetic markers associated with these traits and uncovering the potential underlying cause of their negative correlation - whether linkage and/or pleiotropy. A genome-wide association mapping using 672 clones genotyped at 72,279 SNP loci was carried out. Root yellowness was used indirectly to assess variation in carotenoid content. Two major loci for root yellowness was identified on chromosome 1 at positions 24.1 and 30.5 Mbp. A single locus for dry matter content that co-located with the 24.1 Mbp peak for carotenoid content was identified. Haplotypes at these loci explained a large proportion of the phenotypic variability. Evidence of mega-base-scale linkage disequilibrium around the major loci of the two traits and detection of the major dry matter locus in independent analysis for the white- and yellow-root subpopulations suggests that physical linkage rather that pleiotropy is more likely to be the cause of the negative correlation between the target traits. Moreover, candidate genes for carotenoid (phytoene synthase) and starch biosynthesis (UDP-glucose pyrophosphorylase and sucrose synthase) occurred in the vicinity of the identified locus at 24.1 Mbp. These findings elucidate on the genetic architecture of carotenoids and dry matter in cassava and provides an opportunity to accelerate genetic improvement of these traits