Fabrication of Switches on Polymer-Based by Hot Embossing

In MEMS technology, most of the devices are fabricated on glass or silicon substrate. However, this research presents a novel manufacture method that is derived from conventional hot embossing technology to fabricate the electrostatic switches on polymer material. The procedures of fabrication involve the metal deposition, photolithography, electroplating, hot embossing and hot embed techniques. The fundamental concept of the hot embed technology is that the temperature should be increased above Tg of polymer, and the polymer becomes plastic and viscous and could be molded. According to the fundamental concept, the metal layer on the silicon/glass substrate could be embedded into polymer material during the hot embossing process. Afterward, the metal layer is bonded together with the polymer after removing the substrate in the de-embossing step. Finally, the electrostatic switch is fabricated on polymethylmethacrylate(PMMA) material to demonstrate the novel method.Comment: Submitted on behalf of TIMA Editions (http://irevues.inist.fr/tima-editions

Peccei-Quinn invariant singlet extended SUSY with anomalous U(1) gauge symmetry

Recent discovery of the SM-like Higgs boson with $m_h\simeq 125$ GeV motivates an extension of the minimal supersymmetric standard model (MSSM), which involves a singlet Higgs superfield with a sizable Yukawa coupling to the doublet Higgs superfields. We examine such singlet-extended SUSY models with a Peccei-Quinn (PQ) symmetry that originates from an anomalous $U(1)_A$ gauge symmetry. We focus on the specific scheme that the PQ symmetry is spontaneously broken at an intermediate scale $v_{\rm PQ}\sim \sqrt{m_{\rm SUSY}M_{\rm Pl}}$ by an interplay between Planck scale suppressed operators and tachyonic soft scalar mass $m_{\rm SUSY}\sim \sqrt{D_A}$ induced dominantly by the $U(1)_A$ $D$-term, $D_A$. This scheme also results in spontaneous SUSY breaking in the PQ sector, generating the gaugino masses $M_{1/2}\sim \sqrt{D_A}$ when it is transmitted to the MSSM sector by the conventional gauge mediation mechanism. As a result, the MSSM soft parameters in this scheme are induced mostly by the $U(1)_A$ $D$-term and the gauge mediated SUSY breaking from the PQ sector, so that the sparticle masses can be near the present experimental bounds without causing the SUSY flavor problem. The scheme is severely constrained by the condition that a phenomenologically viable form of the low energy operators of the singlet and doublet Higgs superfields is generated by the PQ breaking sector in a way similar to the Kim-Nilles solution of the $\mu$ problem, and the resulting Higgs mass parameters allow the electroweak symmetry breaking with small $\tan\beta$. We find two minimal models with two singlet Higgs superfields, satisfying this condition with a relatively simple form of the PQ breaking sector, and briefly discuss some phenomenological aspects of the model.Comment: 30 pages, 2 tables, references added, version published in JHE

The Design and Fabrication of Platform Device for Dna Amplification

Thermalcycler were extensively used machine for amplify DNA sample. One of the major problems in the working time was that it spent most of time for cooling and heating. In order to improve the efficient, this study presented a novel method for amplify DNA sample. For this concept, the DNA sample in the silicon chamber which was pushed by a beam through three temperature regions around a center and then the DNA segments could be amplified rapidly after 30 cycles. The polymerase chain reaction platform was composed of thin-film heaters, copper plates, DC powers, and temperature controllers. The photolithography and bulk etching technologies were utilized to construct the thin-film heater and DNA reaction chambers. Finally, 1 pound gL 100bp DNA segment of E. coli K12 was amplified successfully within 36 minutes on this PCR platform.Comment: Submitted on behalf of TIMA Editions (http://irevues.inist.fr/tima-editions

Induced Gauge Structure of Quantum Mechanics on SDS^D

The Ohnuki-Kitakado (O-K) scheme of quantum mechanics on $S^D$ embedded in $R^{D+1}$ is investigated. Generators satisfying the O-K algebra are written down explicitly in term of the induced gauge potential. A direct method is developed to obtain the generators in covariant form. It is seen that there exists an induced gauge configuration which is trivial on $S^D$ but might cause a nontrivial physical effect in $R^{D+1}$. The relation of the O-K scheme to extended objects such as the 't Hooft-Polyakov monopole is discussed.Comment: LaTex,15Page