55 research outputs found
A novel one-pot synthesis and characterization of silk fibroin/α-calcium sulfate hemihydrate for bone regeneration
Funding Information: Funding: Support for this work was provided by the Ministry of Science and Technology, Taiwan MOST 109-2224-E-038-002. The APC was funded by MOST. Publisher Copyright: © 2021 by the authors. Licensee MDPI, Basel, Switzerland.This study aims to fabricate silk fibroin/calcium sulfate (SF/CS) composites by one-pot synthesis for bone regeneration applications. The SF was harvested from degummed silkworm cocoons, dissolved in a solvent system comprising of calcium chloride:ethanol:water (1:2:8), and then mixed with a stoichiometric amount of sodium sulfate to prepare various SF/CS composites. The crystal pattern, glass transition temperature, and chemical composition of SF/CS samples were analyzed by XRD, DSC, and FTIR, respectively. These characterizations revealed the successful synthesis of pure calcium sulfate dihydrate (CSD) and calcium sulfate hemihydrate (CSH) when it was combined with SF. The thermal analysis through DSC indicated molecular-level interaction between the SF and CS. The FTIR deconvolution spectra demonstrated an increment in the β-sheet content by increasing CS content in the composites. The investigation into the morphology of the composites using SEM revealed the formation of plate-like dihydrate in the pure CS sample, while rod-like structures of α-CSH surrounded by SF in the composites were observed. The compressive strength of the hydrated 10 and 20% SF-incorporated CSH composites portrayed more than a twofold enhancement (statistically significant) in comparison to that of the pure CS samples. Reduced compressive strength was observed upon further increasing the SF content, possibly due to SF agglomeration that restricted its uniform distribution. Therefore, the one-pot synthesized SF/CS composites demonstrated suitable chemical, thermal, and morphological properties. However, additional biological analysis of its potential use as bone substitutes is required.publishersversionPeer reviewe
The Processing and Electrical Properties of Isotactic Polypropylene/Copper Nanowire Composites
Funding Information: The authors would like to thank MOST for financially supporting this work under grant No. MOST 110-2224-E-038-001. Publisher Copyright: © 2022 by the authors.Polypropylene (PP), a promising engineering thermoplastic, possesses the advantages of light weight, chemical resistance, and flexible processability, yet preserving insulative properties. For the rising demand for cost-effective electronic devices and system hardware protections, these applications require the proper conductive properties of PP, which can be easily modified. This study investigates the thermal and electrical properties of isotactic polypropylene/copper nanowires (i-PP/CuNWs). The CuNWs were harvested by chemical reduction of CuCl 2 using a reducing agent of glucose, capping agent of hexadecylamine (HDA), and surfactant of PEG-7 glyceryl cocoate. Their morphology, light absorbance, and solution homogeneity were investigated by SEM, UV-visible spectrophotometry, and optical microscopy. The averaged diameters and the length of the CuNWs were 66.4 ± 16.1 nm and 32.4 ± 11.8 µm, respectively. The estimated aspect ratio (L/D, length-to-diameter) was 488 ± 215 which can be recognized as 1-D nanomaterials. Conductive i-PP/CuNWs composites were prepared by solution blending using p-xylene, then melt blending. The thermal analysis and morphology of CuNWs were characterized by DSC, polarized optical microscopy (POM), and SEM, respectively. The melting temperature decreased, but the crystallization temperature increasing of i-PP/CuNWs composites were observed when increasing the content of CuNWs by the melt blending process. The WAXD data reveal the coexistence of Cu 2O and Cu in melt-blended i-PP/CuNWs composites. The fit of the electrical volume resistivity (ρ) with the modified power law equation: ρ = ρ o (V - Vc) -t based on the percolation theory was used to find the percolation concentration. A low percolation threshold value of 0.237 vol% and high critical exponent t of 2.96 for i-PP/CuNWs composites were obtained. The volume resistivity for i-PP/CuNWs composite was 1.57 × 10 7 Ω-cm at 1 vol% of CuNWs as a potential candidate for future conductive materials.publishersversionPeer reviewe
Robust estimation of bacterial cell count from optical density
Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data
Mass Gathering Emergency Medicine: A Review of the Taiwan Experience of Long-distance Swimming Across Sun-Moon Lake
Once a year during the festival of Sun-Moon Lake in Nan-Tou County, Taiwan, a long-distance swimming mass gathering (LDSMG) event takes place. This event, in which participants swim an estimated 30 km, is very popular; the total number of spectators and participants at the 2002 festival was 15,189. This study, the first pertaining to the LDSMG, aimed to review the effect of the environmental factors at this particular mass gathering event, with mass being defined here as more than 1,000 people, upon the event's patient presentation rate (PPR). This was done to provide improved medical services at this event in future years The study also aimed to collect patient data from the two medical stations (one upstream and one downstream) and analyze the differences between them. In 2002, the number of patients requiring first aid treatment was determined from data gathered on-site. A total of 63 presented at on-site medical stations (PPR, 4.15 per 1,000 attendees), where 14 patients presented to a downstream medical station and 49 to an upstream medical station. The mean age of the patients was 35.46 ± 15.14 years; ages ranged from 1 to 65 years. Forty-nine of the patients (78%) were male. Fifty-nine patients were treated with medication (3.88 per 1,000 attendees), and two were taken to hospital (0.13 per 1,000 attendees). Injuries sustained included trauma (71%), such as impact, fall, sprain, stabbed laceration and burn, hypothermia (5%), and foreign bodies (3%). The PPR at the LDSMG was related to factors including the presence or absence of seating, whether the event was outdoors or indoors, mobility of the crowd, whether the activity was contained within a boundary, attendance figures, and humidity level. The weather, particularly the relative humidity (81%), was also positively correlated with an increase in the number of presentations at the medical stations
交易量在估計期貨市場動態極端風險值的角色
http://nchuae.nchu.edu.tw/tc/modules/wfdownloads/visit.php?cid=61&lid=41
A Silk Fibroin Based Hydration Accelerator for Root Canal Filling Materials
Mineral trioxide aggregate (MTA) is widely used in various dental endodontic applications such as root-end filling, furcal perforation repair, and vital pulp therapy. In spite of many attempts to improve handling properties and reduce the discoloration of MTA, the ideal root canal filling material has yet to be fully developed. The objective of this study was to investigate the setting time, mechanical properties, and biocompatibility of MTA set by a silk fibroin solution. A 5 wt% silk fibroin (SF) solution (a novel hydration accelerant) was used to set SavDen® MTA and ProRoot® white MTA (WMTA). Changes in setting time, diametral tensile strength (DTS), material crystallization, in vitro cell viability, and cell morphology were assessed by Vicat needle measurement, a universal testing machine, scanning electron microscopy (SEM), and WST-1 assay, respectively. The initial setting time of ProRoot® MTA and SavDen® MTA experienced a drastic decrease of 83.9% and 42.1% when deionized water was replaced by 5 wt% SF solution as the liquid phase. The DTS of SavDen® MTA showed a significant increase after set by the SF solution in 24 h. A human osteoblast-like cell (MG-63)-based WST-1 assay revealed that both ProRoot® MTA and SavDen® MTA hydrated using SF solution did not significantly differ (p > 0.05) in cell viability. MG-63 cells with pseudopodia attachments and nuclear protrusions represent a healthier and more adherent status on the surface of MTA when set with SF solution. The results suggest that the 5 wt% SF solution may be used as an alternative hydration accelerant for MTA in endodontic applications
Su2034 Inhibition of Hec-1 as a Novel Approach to the Treatment of Hepatocellular Carcinoma
Betel Nut Chewing Is Associated with the Risk of Kidney Stone Disease
(1) Background: Betel nut chewing injures bodily health. Although, the relationship between betel nut chewing and kidney stone disease (KSD) is unknown. (2) Methods: We analyzed 43,636 men from Taiwan Biobank. We divided them into two groups on the status of betel nut chewing, the never-chewer and ever-chewer groups. Self-reported diagnosed KSD was defined as the subject’s medical history of KSD in the questionnaire. Logistic regression was used to analyze the association of betel nut chewing and the risk of KSD. (3) Results: The mean age of subjects in the present study was 50 years, and 16% were ever-chewers. KSD was observed in 3759 (10.3%) and 894 (12.6%) participants in the group of never-chewer and ever-chewer groups, respectively. Higher risk of KSD was found in participants with betel nut chewing compared with to without betel nut chewing (odds ratio (OR), 1.094; 95% confidence interval (95% CI), 1.001 to 1.196). Furthermore, the daily amounts of betel nut chewing >30 quids was associated with a more than 1.5-fold increase (OR, 1.571; 95% CI, 1.186 to 2.079) in the odds of KSD; (4) Conclusions: Our study suggests that betel nut chewing is associated with the risk of KSD and warrants further attention to this problem
- …