2,537 research outputs found
The Cosmic Infrared Background Experiment (CIBER): Instrumentation and First Results
Ultraviolet emission from the first generation of stars in the Universe ionized the intergalactic medium in a process which was completed by z similar to 6; the wavelength of these photons has been redshifted by (1 + z) into the near infrared today and can be measured using instruments situated above the Earth's atmosphere. First flying in February 2009, the Cosmic Infrared Background ExpeRiment (CIBER) comprises four instruments housed in a single reusable sounding rocket borne payload. CIBER will measure spatial anisotropies in the extragalactic IR background caused by cosmological structure from the epoch of reionization using two broadband imaging instruments, make a detailed characterization of the spectral shape of the IR background using a low resolution spectrometer, and measure the absolute brightness of the Zodiacal light foreground with a high resolution spectrometer in each of our six science fields. The scientific motivation for CIBER and details of its first and second flight instrumentation will be discussed. First flight results on the color of the zodiacal light around 1 mu m and plans for the future will also be presented
USING DNA AND ISOZYME MARKERS TO STUDY GENETIC RELATIONSHIP AMONG HIGH REGENERATIVE INTERSPECIFIC HYBRIDS OF HELIANTHUS EGGERTII SMALL. X HELIANTHUS ANNUUS L
ABSTRACT RAPD, AP-PCR, IFLP, SSR and isozymes marker
Observations of the Near-infrared Spectrum of the Zodiacal Light with CIBER
Interplanetary dust (IPD) scatters solar radiation which results in the zodiacal light that dominates the celestial diffuse brightness at optical and near-infrared wavelengths. Both asteroid collisions and cometary ejections produce the IPD, but the relative contribution from these two sources is still unknown. The low resolution spectrometer (LRS) onboard the Cosmic Infrared Background ExpeRiment (CIBER) observed the astrophysical sky spectrum between 0.75 and 2.1 μm over a wide range of ecliptic latitude. The resulting zodiacal light spectrum is redder than the solar spectrum, and shows a broad absorption feature, previously unreported, at approximately 0.9 μm, suggesting the existence of silicates in the IPD material. The spectral shape of the zodiacal light is isotropic at all ecliptic latitudes within the measurement error. The zodiacal light spectrum, including the extended wavelength range to 2.5 μm using Infrared Telescope in Space (IRTS) data, is qualitatively similar to the reflectance of S-type asteroids. This result can be explained by the proximity of S-type asteroidal dust to Earth's orbit, and the relatively high albedo of asteroidal dust compared with cometary dust
The Cosmic Infrared Background Experiment (CIBER): A Sounding Rocket Payload to Study the Near Infrared Extragalactic Background Light
The Cosmic Infrared Background Experiment (CIBER) is a suite of four instruments designed to study the near infrared (IR) background light from above the Earth's atmosphere. The instrument package comprises two imaging telescopes designed to characterize spatial anisotropy in the extragalactic IR background caused by cosmological structure during the epoch of reionization, a low resolution spectrometer to measure the absolute spectrum of the extragalactic IR background, and a narrow band spectrometer optimized to measure the absolute brightness of the Zodiacal light foreground. In this paper we describe the design and characterization of the CIBER payload. The detailed mechanical, cryogenic, and electrical design of the system are presented, including all system components common to the four instruments. We present the methods and equipment used to characterize the instruments before and after flight, and give a detailed description of CIBER's flight profile and configurations. CIBER is designed to be recoverable and has flown twice, with modifications to the payload having been informed by analysis of the first flight data. All four instruments performed to specifications during the second flight, and the scientific data from this flight are currently being analyzed
Approximate Solutions to Fractional Subdiffusion Equations: The heat-balance integral method
The work presents integral solutions of the fractional subdiffusion equation
by an integral method, as an alternative approach to the solutions employing
hypergeometric functions. The integral solution suggests a preliminary defined
profile with unknown coefficients and the concept of penetration (boundary
layer). The prescribed profile satisfies the boundary conditions imposed by the
boundary layer that allows its coefficients to be expressed through its depth
as unique parameter. The integral approach to the fractional subdiffusion
equation suggests a replacement of the real distribution function by the
approximate profile. The solution was performed with Riemann -Liouville
time-fractional derivative since the integral approach avoids the definition of
the initial value of the time-derivative required by the Laplace transformed
equations and leading to a transition to Caputo derivatives. The method is
demonstrated by solutions to two simple fractional subdiffusion equations
(Dirichlet problems): 1) Time-Fractional Diffusion Equation, and 2)
Time-Fractional Drift Equation, both of them having fundamental solutions
expressed through the M-Write function. The solutions demonstrate some basic
issues of the suggested integral approach, among them: a) Choice of the
profile, b) Integration problem emerging when the distribution (profile) is
replaced by a prescribed one with unknown coefficients; c) Optimization of the
profile in view to minimize the average error of approximations; d) Numerical
results allowing comparisons to the known solutions expressed to the M-Write
function and error estimations.Comment: 15 pages, 7 figures, 3 table
Analysis of Dark Data of the PICNIC IR Arrays in the CIBER
We have measured and analyzed the dark data of two PICNIC IR arrays (P574 and P560) obtained through the Cosmic Infrared Background ExpeRiment (CIBER). First, we identified three types of bad pixels: the cold, the hot, and the transient, which are figured in total as 0.06% for P574 and 0.19% for P560. Then, after the bad pixels were masked, we determined the dark noise to be 20.5 ± 0.05 e^- and 16.1 ± 0.05 e^-, and the dark current to be 0.6 ± 0.05 e^-/sec and 0.7 ± 0.05 e^-/sec for P574 and P560, respectively. Finally, we discussed glitches and readout modes for a future mission
BICEP3: a 95 GHz refracting telescope for degree-scale CMB polarization
BICEP3 is a 550 mm-aperture refracting telescope for polarimetry of radiation
in the cosmic microwave background at 95 GHz. It adopts the methodology of
BICEP1, BICEP2 and the Keck Array experiments - it possesses sufficient
resolution to search for signatures of the inflation-induced cosmic
gravitational-wave background while utilizing a compact design for ease of
construction and to facilitate the characterization and mitigation of
systematics. However, BICEP3 represents a significant breakthrough in
per-receiver sensitivity, with a focal plane area 5 larger than a
BICEP2/Keck Array receiver and faster optics ( vs. ).
Large-aperture infrared-reflective metal-mesh filters and infrared-absorptive
cold alumina filters and lenses were developed and implemented for its optics.
The camera consists of 1280 dual-polarization pixels; each is a pair of
orthogonal antenna arrays coupled to transition-edge sensor bolometers and read
out by multiplexed SQUIDs. Upon deployment at the South Pole during the 2014-15
season, BICEP3 will have survey speed comparable to Keck Array 150 GHz (2013),
and will significantly enhance spectral separation of primordial B-mode power
from that of possible galactic dust contamination in the BICEP2 observation
patch.Comment: 12 pages, 5 figures. Presented at SPIE Astronomical Telescopes and
Instrumentation 2014: Millimeter, Submillimeter, and Far-Infrared Detectors
and Instrumentation for Astronomy VII. To be published in Proceedings of SPIE
Volume 915
BICEP2 and Keck Array: upgrades and improved beam characterization
Searching for evidence of inflation by measuring B-modes in the cosmic microwave background (CMB) polarization at degree angular scales remains one of the most compelling experimental challenges in cosmology. BICEP2 and the Keck Array are part of a program of experiments at the South Pole whose main goal is to achieve the sensitivity and systematic control necessary for measurements of the tensor-to-scalar ratio at σ(r) ~0:01. Beam imperfections that are not sufficiently accounted for are a potential source of spurious polarization that could interfere with that goal. The strategy of BICEP2 and the Keck Array is to completely characterize their telescopes' polarized beam response with a combination of in-lab, pre-deployment, and on-site calibrations. We report the status of these experiments, focusing on continued improved understanding of their beams. Far-field measurements of the BICEP2 beam with a chopped thermal source, combined with analysis improvements, show that the level of residual beam-induced systematic errors is acceptable for the goal of σ(r)~ 0:01 measurements. Beam measurements of the Keck Array side lobes helped identify a way to reduce optical loading with interior cold baffles, which we installed in late 2013. These baffles reduced total optical loading, leading to a ~ 10% increase in mapping speed for the 2014 observing season. The sensitivity of the Keck Array continues to improve: for the 2013 season it was 9:5 μK _/s noise equivalent temperature (NET). In 2014 we converted two of the 150-GHz cameras to 100 GHz for foreground separation capability. We have shown that the BICEP2 and the Keck Array telescope technology is sufficient for the goal of σ(r) ~ 0:01 measurements. Furthermore, the program is continuing with BICEP3, a 100-GHz telescope with 2560 detectors
- …