139 research outputs found
Multi-mode soft switching control for variable pitch of wind turbines based on T-S fuzzy weighted
Variable pitch control is an effective way to ensure the constant power operation of the wind turbines over rated wind speed. The pitch actuator acts frequently with larger amplitude and the increasing mechanical fatigue load of parts of wind turbines affects the output quality of generator and damages the service life of wind turbines. The existing switching control methods only switch at a certain threshold, which can result in switch oscillation. In order to deal with these problems, a multi-mode soft switching variable pitch control strategy was put forward based on Takagi-Sugeno (T-S) fuzzy weighted to accomplish soft switch, which combined intelligent control with classical control. The T-S fuzzy inference was carried out according to the error and its change rate, which was used to smooth the modal outputs of fuzzy control, radial basis function neuron network proportion integration differentiation (RBFNN PID) control and proportion integration (PI) control. This method takes the advantages of the three controllers into consideration. A multi-mode soft switch control model for variable pitch of permanent magnet direct drive wind turbines was built in the paper. The simulation results show that this method has the advantages of three control modes, switch oscillation is overcome. The integrated control performance is superior to the others, which can not only stabilize the output power of wind turbines but also reduce the fatigue load
Superphobicity/philicity janus fabrics with Switchable, spontaneous, directional transport ability to water and oil fluids
Herein we demonstrate that switchable, spontaneous, directional-transport ability to both water and oil fluids can be created on fabric materials through wet-chemistry coating and successive UV irradiation treatment. When the fabric showed directional transport to a liquid, it prevented liquids of higher surface tension from penetration, but allowed liquids of lower surface tension to permeate, from either side. The directional transport ability can be switched from one fluid to another simply by heating the fabric at an elevated temperature and then re-irradiating the fabric with UV light for required period of time. By attaching liquid drops vertically upwards to a horizontally-laid fabric, we further demonstrated that this novel directional fluid transport was an automatic process driven by surface property alone, irrespective of gravity's effect. This novel fabric may be useful for development of “smart” textiles and functional membranes for various applications
Robust, electro-conductive, self-healing superamphiphobic fabric prepared by one-step vapour-phase polymerisation of poly(3,4-ethylenedioxythiophene) in the presence of fluorinated decyl polyhedral oligomeric silsesquioxane and fluorinated alkyl silane
A robust, electrically conductive, superamphiphobic fabric was prepared by vapour-phase polymerisation of 3,4-ethylenedioxythiophene (EDOT) on fabric in the presence of fluorinated decyl polyhedral oligomeric silsesquioxane (FD-POSS) and a fluorinated alkyl silane (FAS). The coated fabric had contact angles of 169° and 156° respectively to water and hexadecane, and a surface resistance in the range of 0.8–1.2 kΩ o⁻¹ . The incorporation of FD-POSS and FAS into the PEDOT layer showed a very small influence on the conductivity but improved the washing and abrasion stability considerably. The coated fabric can withstand at least 500 cycles of standard laundry and 10000 cycles of abrasion without apparently changing the superamphiphobicity, while the conductivity only had a small reduction after the washing and abrasion. More interestingly, the coating had a self-healing ability to auto-repair from chemical damages to restore the liquid repellency
Texture evolution induced by twinning and dynamic recrystallization in dilute Mg-1Sn-1Zn-1Al alloy during hot compression
Texture evolution of an extruded dilute Mg-1Sn-1Zn-1Al alloy was thoroughly investigated based on the twinning and dynamic recrystallization (DRX) behavior via hot compression at a strain rate of 10 s−1 and temperature of 225°C. It was found that the types and intensities of the texture are strongly dependent on the fraction of twins and DRX modes as well as regions where sub-grain boundaries (sub-GBs) are intensively accumulated. At the initial stage of deformation, the formation of compression direction (CD)-tilted basal texture was mainly determined by the occurrence of {101¯2} extension twins. As the strain increases, the variation in the texture intensity was greatly dominated by the DRX modes but the type of main texture remained unchanged. These findings are of great importance for texture modification of wrought Mg-Sn-based alloys during post-deformation
Research on speed control of high-speed trains based on hybrid modeling
With the continuous improvement of train speed, the automatic driving of trains instead of driver driving has become the development direction of rail transit in order to realize traffic automation. The application of single modeling methods for speed control in the automatic operation of high-speed trains lacks exploration of the com-bination of train operation data information and physical model, resulting in low system modeling accuracy, which impacts the effectiveness of speed control and the operation of high-speed trains. To further increase the dynamic modeling accuracy of high-speed train operation and the high-speed train's speed control effect, a high-speed train speed control method based on hybrid modeling of mechanism and data drive is put forward. Firstly, a model of the high-speed train's mechanism was created by analyzing the train's dynamics. Secondly, the improved kernel-principal component regression algorithm was used to create a data-driven model using the actual opera-tion data of the CRH3 (China Railway High-speed 3) high-speed train from Huashan North Railway Station to Xi'an North Railway Station of "Zhengxi High-speed Railway," completing the mechanism model compensation and the error correction of the speed of the actual operation process of the high-speed train, and realizing the hybrid modeling of mechanism and data-driven. Finally, the prediction Fuzzy PID control algorithm was devel-oped based on the natural line and train characteristics to complete the train speed control simulation under the hybrid model and the mechanism model, respectively. In addition, analysis and comparison analysis were conduct-ed. The results indicate that, compared to the high-speed train speed control based on the mechanism model, the high-speed train speed control based on hybrid modeling is more accurate, with an average speed control error reduced by 69.42%. This can effectively reduce the speed control error, improve the speed control effect and oper-ation efficiency, and demonstrate the efficacy of the hybrid modeling and algorithm. The research results can provide a new ideal of multi-model fusion modeling for the dynamic modeling of high-speed train operation, further improve control objectives such as safety, comfort, and efficiency of high-speed train operation, and pro-vide a reference for automatic driving and intelligent driving of high-speed trains
Validation of an Arrhythmogenic Right Ventricular Cardiomyopathy Risk-Prediction Model in a Chinese Cohort
BACKGROUND: The novel arrhythmogenic right ventricular cardiomyopathy (ARVC)-associated ventricular arrhythmias (VAs) risk-prediction model endorsed by Cadrin-Tourigny et al. was recently developed to estimate visual VA risk and was identified to be more effective for predicting ventricular events than the International Task Force Consensus (ITFC) criteria, and the Heart Rhythm Society (HRS) criteria. Data regarding its application in Asians are lacking.
OBJECTIVES: We aimed to perform an external validation of this algorithm in the Chinese ARVC population.
METHODS: The study enrolled 88 ARVC patients who received implantable cardioverter-defibrillator (ICD) from January 2005 to January 2020. The primary endpoint was appropriate ICD therapies. The novel prediction model was used to calculate a priori predicted VA risk that was compared with the observed rates.
RESULTS: During a median follow-up of 3.9 years, 57 (64.8%) patients received the ICD therapy. Patients with implanted ICDs for primary prevention had non-significantly lower rates of ICD therapy than secondary prevention (5-year event rate: 0.46 (0.13-0.66) and 0.80 (0.64-0.89); log-rank p = 0.098). The validation study revealed the C-statistic of 0.833 (95% confidence interval (CI) 0.615-1.000), and the predicted and the observed patterns were similar in primary prevention patients (mean predicted-observed risk: -0.07 (95% CI -0.21, 0.09)). However, in secondary prevention patients, the C-statistic was 0.640 (95% CI 0.510-0.770) and the predicted risk was significantly underestimated (mean predicted-observed risk: -0.32 (95% CI -0.39, -0.24)). The recalibration analysis showed that the performance of the prediction model in secondary prevention patients was improved, with the mean predicted-observed risk of -0.04 (95% CI -0.10, 0.03).
CONCLUSIONS: The novel risk-prediction model had a good fitness to predict arrhythmic risk in Asian ARVC patients for primary prevention, and for secondary prevention patients after recalibration of the baseline risk
Characterization and cytotoxicity of PAHs in PM2.5 emitted from residential solid fuel burning in the Guanzhong Plain, China
The emission factors (EFs) of polycyclic aromatic hydrocarbons (PAHs) in PM2.5 were measured from commonly used stoves and fuels in the rural Guanzhong Plain, China. The toxicity of the PM2.5 also was measured using in vitro cellular tests. EFs of PAHs varied from 0.18 mg kg(-1) (maize straw charcoal burning in a clean stove) to 83.3 mg kg(-1) (maize straw burning in Heated Kang). The two largest influencing factors on PAH EFs were air supply and volatile matter proportion in fuel. Improvements in these two factors could decrease not only EFs of PAHs but also the proportion of 3-ring to 5-ring PAHs. Exposure to PM2.5 extracts caused a concentration-dependent decline in cell viability but an increase in reactive oxygen species (ROS), tumor necrosis factor alpha (TNF-alpha) and interleukin 6 (IL-6). PM2.5 emitted from maize burning in Heated Kang showed the highest cytotoxicity, and EFs of ROS and inflammatory factors were the highest as well. In comparison, maize straw charcoal burning in a clean stove showed the lowest cytotoxicity, which indicated a clean stove and fuel treatment were both efficient methods for reducing cytotoxicity of primary PM2.5. The production of these bioreactive factors were highly correlated with 3-ring and 4-ring PAHs. Specifically, pyrene, anthracene and benzo(a)anthracene had the highest correlations with ROS production (R = 0.85, 0.81 and 0.80, respectively). This study shows that all tested stoves emitted PM2.5 that was cytotoxic to human cells; thus, there may be no safe levels of exposure to PM2,5 emissions from cooking and heating stoves using solid fuels. The study may also provide a new approach for evaluating the cytotoxicity of primary emitted PM2.5 from solid fuel burning as well as other PM2.5 sources. (C) 2018 Elsevier Ltd. All rights reserved
Multi-Stage Tuberculosis Subunit Vaccine Candidate LT69 Provides High Protection against Mycobacterium tuberculosis Infection in Mice
Effective tuberculosis (TB) vaccine should target tubercle bacilli with various metabolic states and confer long-term protective immunity. In this study, we constructed a novel multi-stage TB subunit vaccine based on fusion protein ESAT6-Ag85B-MPT64(190-198)-Mtb8.4-HspX (LT69 for short) which combined early expressed antigens and latency-associated antigen. The fusion protein was mixed with an adjuvant being composed of N, N’-dimethyl-N, N’-dioctadecylammonium bromide (DDA) and polyriboinosinic polyribocytidylic acid (PolyI:C) to construct subunit vaccine, whose immunogenicity and protective ability were evaluated in C57BL/6 mice. The results showed that LT69 had strong immunogenicity and high protective effect against Mycobacterium tuberculosis (M. tuberculosis) H37Rv aerosol challenge. Low-dose (2 μg) of LT69 generated long-term immune memory responses and provided effective protection, which was even higher than traditional vaccine BCG did at 30 weeks post the last vaccination. In conclusion, multistage subunit vaccine LT69 showed high and long-term protection against M. tuberculosis infection in mice, whose effect could be enhanced by using a relative low dosage of antigen.National Major Science and Technology Projects (China) (2012ZX10003-008-006)National Natural Science Foundation (China) (31470895)National Natural Science Foundation (China) (81072499)China. Ministry of Education (Doctoral Fund 20120211110038
- …