25,028 research outputs found
Impact of Electrostatic Forces in Contact Mode Scanning Force Microscopy
In this contribution we address the question to what extent surface
charges affect contact-mode scanning force microscopy measurements. % We
therefore designed samples where we could generate localized electric field
distributions near the surface as and when required. % We performed a series of
experiments where we varied the load of the tip, the stiffness of the
cantilever and the hardness of the sample surface. % It turned out that only
for soft cantilevers could an electrostatic interaction between tip and surface
charges be detected, irrespective of the surface properties, i.\,e. basically
regardless its hardness. % We explain these results through a model based on
the alteration of the tip-sample potential by the additional electric field
between charged tip and surface charges
Suppression of spin-pumping by a MgO tunnel-barrier
Spin-pumping generates pure spin currents in normal metals at the ferromagnet
(F)/normal metal (N) interface. The efficiency of spin-pumping is given by the
spin mixing conductance, which depends on N and the F/N interface. We directly
study the spin-pumping through an MgO tunnel-barrier using the inverse spin
Hall effect, which couples spin and charge currents and provides a direct
electrical detection of spin currents in the normal metal. We find that
spin-pumping is suppressed by the tunnel-barrier, which is contrary to recent
studies that suggest that the spin mixing conductance can be enhanced by a
tunnel-barrier inserted at the interface
Multi-excitonic complexes in single InGaN quantum dots
Cathodoluminescence spectra employing a shadow mask technique of InGaN layers
grown by metal organic chemical vapor deposition on Si(111) substrates are
reported. Sharp lines originating from InGaN quantum dots are observed.
Temperature dependent measurements reveal thermally induced carrier
redistribution between the quantum dots. Spectral diffusion is observed and was
used as a tool to correlate up to three lines that originate from the same
quantum dot. Variation of excitation density leads to identification of exciton
and biexciton. Binding and anti-binding complexes are discovered.Comment: 3 pages, 4 figure
The Effects of Additives on the Physical Properties of Electroformed Nickel and on the Stretch of Photoelectroformed Nickel Components
The process of nickel electroforming is becoming increasingly important in
the manufacture of MST products, as it has the potential to replicate complex
geometries with extremely high fidelity. Electroforming of nickel uses
multi-component electrolyte formulations in order to maximise desirable product
properties. In addition to nickel sulphamate (the major electrolyte component),
formulation additives can also comprise nickel chloride (to increase nickel
anode dissolution), sulphamic acid (to control pH), boric acid (to act as a pH
buffer), hardening/levelling agents (to increase deposit hardness and lustre)
and wetting agents (to aid surface wetting and thus prevent gas bubbles and
void formation). This paper investigates the effects of some of these variables
on internal stress and stretch as a function of applied current density.Comment: Submitted on behalf of TIMA Editions
(http://irevues.inist.fr/tima-editions
Surface spin flip probability of mesoscopic Ag wires
Spin relaxation in mesoscopic Ag wires in the diffusive transport regime is
studied via nonlocal spin valve and Hanle effect measurements performed on
permalloy/Ag lateral spin valves. The ratio between momentum and spin
relaxation times is not constant at low temperatures. This can be explained
with the Elliott-Yafet spin relaxation mechanism by considering the momentum
surface relaxation time as being temperature dependent. We present a model to
separately determine spin flip probabilities for phonon, impurity and surface
scattering and find that the spin flip probability is highest for surface
scattering.Comment: 5 pages, 4 figure
Detection and quantification of inverse spin Hall effect from spin pumping in permalloy/normal metal bilayers
Spin pumping is a mechanism that generates spin currents from ferromagnetic
resonance (FMR) over macroscopic interfacial areas, thereby enabling sensitive
detection of the inverse spin Hall effect that transforms spin into charge
currents in non-magnetic conductors. Here we study the spin-pumping-induced
voltages due to the inverse spin Hall effect in permalloy/normal metal bilayers
integrated into coplanar waveguides for different normal metals and as a
function of angle of the applied magnetic field direction, as well as microwave
frequency and power. We find good agreement between experimental data and a
theoretical model that includes contributions from anisotropic
magnetoresistance (AMR) and inverse spin Hall effect (ISHE). The analysis
provides consistent results over a wide range of experimental conditions as
long as the precise magnetization trajectory is taken into account. The spin
Hall angles for Pt, Pd, Au and Mo were determined with high precision to be
, , and ,
respectively.Comment: 11 page
- …