Designing of a Fleet-Leader Program for Carbon Composite Overwrapped Pressure Vessels

Composite Overwrapped Pressure Vessels (COPVs) are often used for storing pressurant gases on board spacecraft when mass saving is a prime requirement. Substantial weight savings can be achieved compared to all metallic pressure vessels. For example, on the space shuttle, replacement of all metallic pressure vessels with Kevlar COPVs resulted in a weight savings of about 30 percent. Mass critical space applications such as the Ares and Orion vehicles are currently being planned to use as many COPVs as possible in place of all-metallic pressure vessels to minimize the overall mass of the vehicle. Due to the fact that overwraps are subjected to sustained loads during long periods of a mission, stress rupture failure is a major concern. It is, therefore, important to ascertain the reliability of these vessels by analysis, since it is practically impossible to show by experimental testing the reliability of flight quality vessels. Also, it is a common practice to set aside flight quality vessels as "fleet leaders" in a test program where these vessels are subjected to slightly accelerated operating conditions so that they lead the actual flight vessels both in time and load. The intention of fleet leaders is to provide advanced warning if there is a serious design flaw in the vessels so that a major disaster in the flight vessels can be averted with advance warning. On the other hand, the accelerating conditions must be not so severe as to be prone to false alarms. The primary focus of the present paper is to provide an analytical basis for designing a viable fleet leader program for carbon COPVs. The analysis is based on a stress rupture behavior model incorporating Weibull statistics and power-law sensitivity of life to fiber stress level

Predicting and Controlling Resolution and Surface Finish of Ceramic Objects Produced by Stereodeposition Processes

Stereodeposition techniques are well suited for the Solid Freeform Fabrication of dense ceramic components. As opposed to forming a pattern in a particle bed or polymer bath, stereodeposition processes deposit material directly onto the previously created layer. The key to stereodeposition is a material's ability to be dispensed as a fluid, yet rapidly stiffen to hold the shape of the object. This is accomplished by either solidification of a thermoplastic binder upon cooling from a melt (Fused Deposition) or by polymerization of a binder (Reactive Stereodeposition). We are developing both techniques for the production of functional ceramic and engineering polymer objects. A key issue in developing a successful stereodeposition system is controlling the rate of bead transformation from liquid to solid. Control is critical to achieving high resolution and low surface roughness of the finished product, but is made complex by the large number of parameters involved. These include binder parameters (surface tension, gelling characteristics), slurry parameters (viscosity, particle loading and size distribution), and process parameters (deposition rate, temperature). Current efforts at the University of Arizona are focused on modeling and controlling the deposition and transformation of ceramic slurries used in the Reactive Stereodeposition process.Mechanical Engineerin

Economic costs of invasive alien ants worldwide

Invasive ants are amongst the most destructive and widespread invaders across the globe; they can strongly alter invaded ecosystems and are responsible for the loss of native ant species. Several studies have reported that invasive ants can also lead to substantial economic costs. In this study, we search, describe and analyse 1342 reported costs of invasive ants compiled in the InvaCost database. Economic costs, reported since 1930 for 12 ant species in 27 countries, totalled US$51.93 billion, from which US$ 10.95 billion were incurred, and US$40.98 billion were potential costs (i.e., expected or predicted costs). More than 80$ 1.79 billion), with much lower amounts dedicated to prevention (US$ 235.63 million). Besides the taxonomic bias, cost information was lacking for an average of 78% of the invaded countries. Moreover, even in countries where costs were reported, such information was available for only 56% of the invaded locations. Our synthesis suggests that the global costs of invasive ants are massive but largely biased towards developed economies, with a huge proportion of underreported costs, and thus most likely grossly underestimated. We advocate for more and improved cost reporting of invasive ants through better collaborations between managers, practitioners and researchers, a crucial basis for adequately informing future budgets and improving proactive management actions of invasive ants

Prenatal exposure to organophosphate esters and behavioral development in young children in the Pregnancy, Infection, and Nutrition Study

Organophosphate esters (OPEs) are commonly used as plasticizers and flame retardants in consumer products, and exposure is relatively ubiquitous in most populations studied. This may be of concern as some OPEs may be neurotoxic, endocrine-disrupting, and interfere with behavioral development; however, observational evidence is limited. We used data from the Pregnancy, Infection, and Nutrition Study, a prospective birth cohort study, to investigate associations between maternal OPE metabolite concentrations during pregnancy and behavioral development in offspring. Women provided a urine sample during pregnancy that was analyzed for concentrations of OPE metabolites, including diphenyl phosphate (DPHP), bis(1,3-dichloro-2-propyl phosphate) (BDCIPP), isopropyl-phenyl phenyl phosphate (ip-PPP), and 1-hydroxyl-2-propyl bis(1-chloro-2-propyl) phosphate (BCIPHIPP). Offspring's behavioral development was assessed by the Behavioral Assessment System for Children (2nd Edition) (BASC-2) at approximately 36 months. Linear regression was used to estimate associations between tertiles in specific gravity-corrected OPE metabolite concentrations and children's scores on the BASC-2, adjusted for maternal age, maternal BMI, maternal race, maternal education, familial income, maternal depression, quality of the home environment, and sex. Higher BDCIPP concentrations were associated with higher scores on the Behavioral Symptoms Index (1st vs. 3rd tertile: β = 3.03; 95% CI = 0.40, 5.67) and Externalizing Problems (1st vs. 3rd tertile: β = 2.49; 95% CI: −0.12, 5.10) composites. Among BASC-2 scales, BDCIPP was most strongly associated with Withdrawal, Attention Problems, Depression, Hyperactivity, and Aggression. DPHP concentrations were also associated with higher scores on the Externalizing Problems and Behavioral Symptoms Index composites, but not as strongly as BDCIPP. Conversely, higher concentrations of ip-PPP were associated with fewer adverse behavioral symptoms, including an inverse association with the Internalizing Problems composite (1st vs. 3rd tertile: β = −3.74; 95% CI = −6.75, −0.74) and constituent scales. BCIPHIPP was not strongly associated with any measured behavioral outcomes. Our results suggest that greater maternal exposure to tris(1,3-dichloro-2-propyl phosphate) (TDCIPP, parent compound of BDCIPP) and, to a lesser degree, triphenyl phosphate (TPHP, parent compound of DPHP) during pregnancy is associated with adverse behavioral development in children. Our study contributes to the growing body of evidence pertaining to adverse developmental effects of prenatal OPE exposure and highlights the need for further research to characterize risks associated with this ubiquitous family of chemicals

Prenatal exposure to organophosphate esters and cognitive development in young children in the Pregnancy, Infection, and Nutrition Study

Organophosphate esters (OPEs) are a class of chemicals commonly used as flame retardants and plasticizers. OPEs are applied to a wide variety of consumer products and have a propensity to leach from these products. Consequently, OPEs are ubiquitous contaminants in many human environments and human exposure is pervasive. Accumulating evidence suggests that OPEs are capable of interfering with childhood cognitive development through both neurologic- and endocrine-mediated mechanisms. However, observational evidence of cognitive effects is limited. We used data collected in the third phase of the Pregnancy, Infection, and Nutrition Study to investigate cognitive effects of prenatal exposure to OPEs. In a spot prenatal maternal urine sample, we measured the following OPE metabolites: diphenyl phosphate (DPHP), bis(1,3-dichloro-2-propyl phosphate) (BDCIPP), isopropyl-phenyl phenyl phosphate (ip-PPP), and 1-hydroxyl-2-propyl bis(1-chloro-2-propyl) phosphate (BCIPHIPP). We assessed children's language and multi-faceted and overall cognitive development between two and three years of age using the MacArthur-Bates Communicative Development Inventories (MB-CDI) and the Mullen Scales of Early Learning (MSEL). We used linear regression to estimate the change in children's scores on these developmental assessments per interquartile range (IQR) increase in log-transformed, specific-gravity-corrected prenatal OPE metabolite concentrations, adjusted for maternal age, education, income, race/ethnicity, BMI, and child's sex. A total of 149 children had both OPE metabolite measurements and MB-CDI scores, and 227 children had both OPE metabolite measurements and MSEL scores. We observed that higher concentrations of ip-PPP (ng/ml) were associated with lower scores on the MSEL Cognitive Composite Score (β = −2.61; 95% CI: −5.69, 0.46), and separately on two of the four MSEL Scales that comprise the Cognitive Composite, specifically the Fine Motor Scale (β = −3.08; 95% CI: −5.26, −0.91) and the Expressive Language Scale (β = −1.21; 95% CI: −2.91, 0.49). We similarly observed that prenatal ip-PPP concentrations were inversely associated with age-standardized scores on the MB-CDI Vocabulary assessment (β = −1.19; 95% CI: −2.53, 0.16). Other OPE metabolites were not strongly associated with performance on either assessment. Our results suggest that isopropylated triarylphosphate isomers, the presumed parent compounds of ip-PPP, may adversely impact cognitive development, including fine motor skills and early language abilities. Our study contributes to the growing body of observational evidence that suggests prenatal exposure to OPEs may adversely affect cognitive development

Enhancement of low-mass dileptons in heavy-ion collisions

Using a relativistic transport model for the expansion stage of S+Au collisions at 200 GeV/nucleon, we show that the recently observed enhancement of low-mass dileptons by the CERES collaboration can be explained by the decrease of vector meson masses in hot and dense hadronic matter.Comment: 12 pages, RevTeX, 3 figures available from [email protected]

Massive binary black holes in galactic nuclei and their path to coalescence

Massive binary black holes form at the centre of galaxies that experience a merger episode. They are expected to coalesce into a larger black hole, following the emission of gravitational waves. Coalescing massive binary black holes are among the loudest sources of gravitational waves in the Universe, and the detection of these events is at the frontier of contemporary astrophysics. Understanding the black hole binary formation path and dynamics in galaxy mergers is therefore mandatory. A key question poses: during a merger, will the black holes descend over time on closer orbits, form a Keplerian binary and coalesce shortly after? Here we review progress on the fate of black holes in both major and minor mergers of galaxies, either gas-free or gas-rich, in smooth and clumpy circum-nuclear discs after a galactic merger, and in circum-binary discs present on the smallest scales inside the relic nucleus.Comment: Accepted for publication in Space Science Reviews. To appear in hard cover in the Space Sciences Series of ISSI "The Physics of Accretion onto Black Holes" (Springer Publisher

Smoothed Particle Hydrodynamics (SPH) modelling of transient heat transfer in pulsed laser ablation of Al and associated free-surface problems

A Smoothed Particle Hydrodynamics (SPH) numerical model is developed to simulate pulsed-laser ablation processes for micro-machining. Heat diffusion behaviour of a specimen under the action of nanosecond pulsed lasers can be described analytically by using complementary error function solutions of second-order differential equations. However, their application is limited to cases without loss of material at the surface. Compared to conventional mesh-based techniques, as a novel meshless simulation method, SPH is ideally suited to applications with highly non-linear and explosive behaviour in laser ablation. However, little is known about the suitability of using SPH for the modelling of laser-material interactions with multiple phases at the micro scale. The present work investigates SPH modelling of pulsed-laser ablation of aluminium where the laser is applied directly to the free-surface boundary of the specimen. Having first assessed the performance of standard SPH surface treatments for functions commonly used to describe laser heating, the heat conduction behaviour of a new SPH methodology is then evaluated through a number of test cases for single- and multiple-pulse laser heating of aluminium showing excellent agreement when compared with an analytical solution. Simulation of real ablation processes, however, requires the model to capture the removal of material from the surface and its subsequent effects on the laser heating process. Hence, the SPH model for describing the transient behaviour of nanosecond laser ablation is validated with a number of experimental and reference results reported in the literature. The SPH model successfully predicts the material ablation depth profiles over a wide range of laser fluences 4–23 J/cm2 and pulse durations 6–10 ns, and also predicts the transient behaviour of the ejected material during the laser ablation process. Unlike conventional mesh-based methods, the SPH model was not only able to provide the thermo-physical properties of the ejected particles, but also the effect of the interaction between them as well as the direction and the pattern of the ejection

Longitudinal double-spin asymmetry and cross section for inclusive neutral pion production at midrapidity in polarized proton collisions at sqrt(s) = 200 GeV

We report a measurement of the longitudinal double-spin asymmetry A_LL and the differential cross section for inclusive Pi0 production at midrapidity in polarized proton collisions at sqrt(s) = 200 GeV. The cross section was measured over a transverse momentum range of 1 < p_T < 17 GeV/c and found to be in good agreement with a next-to-leading order perturbative QCD calculation. The longitudinal double-spin asymmetry was measured in the range of 3.7 < p_T < 11 GeV/c and excludes a maximal positive gluon polarization in the proton. The mean transverse momentum fraction of Pi0's in their parent jets was found to be around 0.7 for electromagnetically triggered events.Comment: 6 pages, 3 figures, submitted to Phys. Rev. D (RC

Partonic flow and ϕ\phi-meson production in Au+Au collisions at sNN\sqrt{s_{NN}} = 200 GeV

We present first measurements of the $\phi$-meson elliptic flow ($v_{2}(p_{T})$) and high statistics $p_{T}$ distributions for different centralities from $\sqrt{s_{NN}}$ = 200 GeV Au+Au collisions at RHIC. In minimum bias collisions the $v_{2}$ of the $\phi$ meson is consistent with the trend observed for mesons. The ratio of the yields of the $\Omega$ to those of the $\phi$ as a function of transverse momentum is consistent with a model based on the recombination of thermal $s$ quarks up to $p_{T}\sim 4$ GeV/$c$, but disagrees at higher momenta. The nuclear modification factor ($R_{CP}$) of $\phi$ follows the trend observed in the $K^{0}_{S}$ mesons rather than in $\Lambda$ baryons, supporting baryon-meson scaling. Since $\phi$-mesons are made via coalescence of seemingly thermalized $s$ quarks in central Au+Au collisions, the observations imply hot and dense matter with partonic collectivity has been formed at RHIC.Comment: 6 pages, 4 figures, submit to PR