Fabrication of TiO2 nanofibre photoelectrode for photoelectrochemical cells

The TiO2 nanofibres (NFs), prepared with the electrospinning method, acted as the photoanode in a photoelectrochemical cell (PEC) for hydrogen generation. The fabrication parameters of Ti/PVP (polyvinylpyrrolidone) fibres were determined with the field-emission scanning electron microscopy (FE-SEM) method. The structure and morphology of the TiO2 fibres were characterized by using X-ray diffraction (XRD), FE-SEM, transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HR-TEM). The average diameter of the TiO2 fibre is 132 ± 16 nm. A three-electrode potentiostat was used to study the photoelectrochemical properties of the photoanode. The density photocurrent reached the saturation value of 80 mA·cm–2 at 0.2 V under the irradiation of a Xenon lamp

Stimulation of shoot regeneration through leaf thin cell layer culture of Passiflora edulis Sims.

Passiflora edulis Sims. belonged to the genus Passiflora, is one of the important economic crops of the world as well as Vietnam. Nowadays, the commercial P. edulis is mainly propagated by seeds, cuttings and grafting; however, these methods still have some limitations such as genetic degradation and heterogeneity and the spread of pathogenic viruses. Micro-propagation has been used for clonal breeding and disease-free plant breeding, as well as providing a source of materials for Passiflora breeding. In this study, leaf explants of P. edulis Sims. (2.0-month-old) excised from the in vitro culture of ex vitro axillary buds cut longitudinally and transversally into thin cell layers (lTCL and tTCL) were used as plant materials to evaluate the shoot regeneration. In addition, the effects of explant age and lighting condition on shoot regeneration were also investigated. After 8 weeks of culture, the results showed that shoot regeneration rate (100%) and shoot multiplication coefficient (13.33) of the in vitro leaf-tTCL-4 were higher than those of other treatments and control. The shoot regeneration rate of P. edulis Sims. also varied with the change of explant age. The highest shoot regeneration rate (100%) was obtained from leaf explants of 1.5-month-old shoots after 8 weeks of culture. Moreover, the light (fluorescent lamps with photoperiod of 16 hours/day and lighting intensity of 40 - 45 μmol.m-2.s-1) improved not only morphogenesis rate, but also shoot regeneration rate (100%) of leaf explants after 8 weeks of culture. This study provided a novel method for rapid micro-propagation of P. edulis Sims

TextANIMAR: Text-based 3D Animal Fine-Grained Retrieval

3D object retrieval is an important yet challenging task, which has drawn more and more attention in recent years. While existing approaches have made strides in addressing this issue, they are often limited to restricted settings such as image and sketch queries, which are often unfriendly interactions for common users. In order to overcome these limitations, this paper presents a novel SHREC challenge track focusing on text-based fine-grained retrieval of 3D animal models. Unlike previous SHREC challenge tracks, the proposed task is considerably more challenging, requiring participants to develop innovative approaches to tackle the problem of text-based retrieval. Despite the increased difficulty, we believe that this task has the potential to drive useful applications in practice and facilitate more intuitive interactions with 3D objects. Five groups participated in our competition, submitting a total of 114 runs. While the results obtained in our competition are satisfactory, we note that the challenges presented by this task are far from being fully solved. As such, we provide insights into potential areas for future research and improvements. We believe that we can help push the boundaries of 3D object retrieval and facilitate more user-friendly interactions via vision-language technologies.Comment: arXiv admin note: text overlap with arXiv:2304.0573

Current advances in seagrass research: A review from Viet Nam

Seagrass meadows provide valuable ecosystem services but are fragile and threatened ecosystems all over the world. This review highlights the current advances in seagrass research from Viet Nam. One goal is to support decision makers in developing science-based conservation strategies. In recent years, several techniques were applied to estimate the size of seagrass meadows. Independent from the method used, there is an alarming decline in the seagrass area in almost all parts of Viet Nam. Since 1990, a decline of 46.5% or 13,549 ha was found. Only in a few protected and difficult-to-reach areas was an increase observed. Conditions at those sites could be investigated in more detail to make suggestions for conservation and recovery of seagrass meadows. Due to their lifestyle and morphology, seagrasses take up compounds from their environment easily. Phytoremediation processes of Thalassia hemprichii and Enhalus acoroides are described exemplarily. High accumulation of heavy metals dependent on their concentration in the environment in different organs can be observed. On the one hand, seagrasses play a role in phytoremediation processes in polluted areas; on the other hand, they might suffer at high concentrations, and pollution will contribute to their overall decline. Compared with the neighboring countries, the total Corg stock from seagrass beds in Viet Nam was much lower than in the Philippines and Indonesia but higher than that of Malaysia and Myanmar. Due to an exceptionally long latitudinal coastline of 3,260 km covering cool to warm water environments, the seagrass species composition in Viet Nam shows a high diversity and a high plasticity within species boundaries. This leads to challenges in taxonomic issues, especially with the Halophila genus, which can be better deduced from genetic diversity/population structures of members of Hydrocharitaceae. Finally, the current seagrass conservation and management efforts in Viet Nam are presented and discussed. Only decisions based on the interdisciplinary cooperation of scientists from all disciplines mentioned will finally lead to conserve this valuable ecosystem for mankind and biodiversity

Analytical frequency modeling of a diode rectifier Formulation for SQP solving versus formulation for Newton-Raphson solving

Purpose Static converters generate current harmonics in grids. Numerous studies on analytical frequency models of converters are often required to carry out their harmonic modeling in the context of sizing by optimization. Some formulations are proposed to solve such models. Each formulation has its own advantages and drawbacks. The paper mainly focuses on two formulations: the first to be solved by Sequential Quadratic Programming (SQP) and the second to be solved by Newton-Raphson (NR). In this way, the paper presents the performances of each formulation and compares the results of both formulations for the modeling of a single-phase diode rectifier. Design/methodology/approach The paper aims to compare SQP formulation and NR formulation, and to propose the ways to improve their convergence. In the modeling, by using an explicit formulation of the state variables combined to a numerical method, equations are defined to reduce, as far as possible, the number of unknowns. Findings The difficulty is to find the good operating mode of the static converter. So, outside the equations and the constraints, the paper proposes to use the eigenvalues of the state space matrixes to initialize the duration of every configuration and to consider the operating symmetries of the static converter that allow to reduce the research area and also the variables calculated. Research limitations/implications The number of the conducting phase per half period is a priori, as the operating mode. Originality/value The modeling is based on the use of linear components, ideal switches and the static converter operates in steady-state. The main difficulties are to formulate the equations representing the non-controlled switching of semiconductors, and to solve them. </jats:sec

ANALYTICAL FREQUENCY MODEL OF A DIODE RECTIFIER: SQP SOLVING VERSUS NEWTON-RAPHSON SOLVING

International audienc

Analytical frequency modeling of static converters toward sizing of the system by optimization

International audienceStatic converters generate current harmonics in grids. Numerous studies on analytical frequency modeling are preferred to carry out their harmonic modelling in the context of sizing by optimization. In particular, the systems which have several static converters, present the difficulties for analytical frequency modeling and also for the sizing of systems by optimization. The paper focuses on apply an approach using such a modeling, on the sizing by optimization of an aeronautic power channel

Use of SQP optimization algorithm to size a multiphysical system: Application to an aircraft electrical power channel

WOS:000432182900010International audienc

Effective traffic routing for urban transportation capacity and safety enhancement

Traffic routing is an essential service in most intelligent transportation systems (ITS), especially in urban traffic networks of large cities. However, this is a challenge issue as these traffic networks are complicated and traffic conditions change dynamically. Existing routing solutions from technology giants such as Google Maps, Waze are still insufficient in terms of accuracy (effectiveness) and efficiency (performance), especially applying in developing countries where traffic infrastructures have not yet matured enough, leading to degradation of transportation performance, safety while increasing traffic jam, economic loss, air and noise pollution. This work proposes an effective routing approach in large cities to avoid traffic congestion, enhancing transportation capacity and safety. Concretely, this work designed an appropriate urban traffic data organization scheme and devised a novel approach to searching solutions in an optimal routing algorithm, thus improve the routing performance significantly. Results from real-field experiments confirm the effectiveness and the efficiency of the proposed approaches which are prominent compared to the state-of-the-art solutions. The proposed approaches have been applied in a real urban traffic network of Ho Chi Minh City, the biggest city in Vietnam whose traffic is complicated. The experimental results and the practical deployed system reveal that the proposed mechanisms are ready to be applied in real-world applications

Evaluation of the Use of Different Solvents for Phytochemical Constituents, Antioxidants, and In Vitro Anti-Inflammatory Activities of Severinia buxifolia

Severinia buxifolia (Rutaceae) is a promising source of bioactive compounds since it has been traditionally used for the treatment of various diseases. The present study aimed at evaluating the impact of different solvents on extraction yields, phytochemical constituents and antioxidants, and in vitro anti-inflammatory activities of S. buxifolia. The results showed that the used solvents took an important role in the yield of extraction, the content of chemical components, and the tested biological activities. Methanol was identified as the most effective solvent for the extraction, resulting in the highest extraction yield (33.2%) as well as the highest content of phenolic (13.36 mg GAE/g DW), flavonoid (1.92 mg QE/g DW), alkaloid (1.40 mg AE/g DW), and terpenoids (1.25%, w/w). The extract obtained from methanol exhibited high capacity of antioxidant (IC50 value of 16.99 μg/mL) and in vitro anti-inflammatory activity (i.e., albumin denaturation: IC50 = 28.86 μg/mL; antiproteinase activity: IC50 = 414.29 μg/mL; and membrane stabilization: IC50 = 319 μg/mL). The antioxidant activity of the S. buxifolia extract was found to be 3-fold higher than ascorbic acid, and the anti-inflammatory activity of S. buxifolia extract was comparable to aspirin. Therefore, methanol is recommended as the optimal solvent to obtain high content of phytochemical constituents as well as high antioxidants and in vitro anti-inflammatory constituents from the branches of S. buxifolia for utilization in pharmacognosy