A new method for designing FIR filters with variable characteristics

This letter proposes a new method for designing finite-impulse response (FIR) filters with variable characteristics. The impulse response of the variable digital filter (VDF) is parameterized as a linear combination of functions in the spectral or tuning parameters. Using the least square objective function, the optimal solution is obtained by solving a system of linear equations. Design results show that this method is simple and effective in designing FIR VDF with good frequency characteristics. Furthermore, by using piecewise polynomial, instead of ordinary polynomial, more complicated frequency characteristics, or larger tuning range can be approximated.published_or_final_versio

New sequential partial-update least mean M-estimate algorithms for robust adaptive system identification in impulsive noise

The sequential partial-update least mean square (S-LMS)-based algorithms are efficient methods for reducing the arithmetic complexity in adaptive system identification and other industrial informatics applications. They are also attractive in acoustic applications where long impulse responses are encountered. A limitation of these algorithms is their degraded performances in an impulsive noise environment. This paper proposes new robust counterparts for the S-LMS family based on M-estimation. The proposed sequential least mean M-estimate (S-LMM) family of algorithms employ nonlinearity to improve their robustness to impulsive noise. Another contribution of this paper is the presentation of a convergence performance analysis for the S-LMS/S-LMM family for Gaussian inputs and additive Gaussian or contaminated Gaussian noises. The analysis is important for engineers to understand the behaviors of these algorithms and to select appropriate parameters for practical realizations. The theoretical analyses reveal the advantages of input normalization and the M-estimation in combating impulsive noise. Computer simulations on system identification and joint active noise and acoustic echo cancellations in automobiles with double-talk are conducted to verify the theoretical results and the effectiveness of the proposed algorithms. © 2010 IEEE.published_or_final_versio

Review of trigeminal neuralgia in a regional neurology clinic

published_or_final_versio

Design of two-channel PR FIR filter banks with low system delay

IEEE International Symposium on Circuits and Systems, Geneva, Switzerland, 28-31 May 2000In this paper, a new approach for designing two-channel PR FIR filter banks with low system delay is proposed. It is based on the generalization of the structure previously proposed by Phoong et al. Such structurally PR filter banks are parameterized by two functions α(z) and β(z) which can be chosen as linear-phase FIR or allpass functions to construct FIR/IIR filter banks with good frequency characteristics. In this paper, the more general case of using different nonlinear-phase FIR functions for β(z) and α(z) is studied. As the linear-phase requirement is relaxed, higher stopband attenuation can still be achieved at low system delay. The design of the proposed low-delay filter banks is formulated as a complex polynomial approximation problem, which can be solved by the Remez exchange algorithm or analytic formula with very low complexity. The usefulness of the proposed algorithm is demonstrated by several design examples.published_or_final_versio

Adaptive beamforming using frequency invariant uniform concentric circular arrays

This paper proposes new adaptive beamforming algorithms for a class of uniform concentric circular arrays (UCCAs) having near-frequency invariant characteristics. The basic principle of the UCCA frequency invariant beamformer (FIB) is to transform the received signals to the phase mode representation and remove the frequency dependence of individual phase modes through the use of a digital beamforming or compensation network. As a result, the far field pattern of the array is electronic steerable and is approximately invariant over a wider range of frequencies than the uniform circular arrays (UCAs). The beampattern is governed by a small set of variable beamformer weights. Based on the minimum variance distortionless response (MVDR) and generalized sidelobe canceller (GSC) methods, new recursive adaptive beamforming algorithms for UCCA-FIB are proposed. In addition, robust versions of these adaptive beamforming algorithms for mitigating direction-of-arrival (DOA) and sensor position errors are developed. Simulation results show that the proposed adaptive UCCA-FIBs converge much faster and reach a considerable lower steady-state error than conventional broadband UCCA beamformers without using the compensation network. Since fewer variable multipliers are required in the proposed algorithms, it also leads to lower arithmetic complexity and faster tracking performance than conventional methods. © 2007 IEEE.published_or_final_versio

A visual model for subband image coding

In this paper, we propose a visual model for the general subband coding system. This model is a generalization of Watson's visual model for DCT. Based on this model, a new perceptual distortion is proposed which can be used together with an efficient bit allocation algorithm to determine the quantizer stepsizes of subband coders. Simulation results and subjective viewing tests demonstrate that the proposed approach is very effective in improving the subjective quality of the encoded image at low bit rate.published_or_final_versio

Teletext data change detection and noiseless data compression

Full Channel teletext system is a high speed data broadcasting system. Pages of information are broadcast in a cyclic manner. The detection of data change in the information pages is necessary for data analysis, database update and retransmission. Lossless data compression is also necessary to enhance the data throughput in rebroadcasting and to reduce the storage requirement. Performing data change detection and data compression in real time using a software approach in a small machine is impossible for such high speed data. In this paper, we describe the algorithms that are suitable for hardware implementation for both data change detection and noiseless data compression.published_or_final_versio

M-channel cosine-modulated wavelet bases

The 13th International Conference on Digital Signal Processing, Santorini, Greece, 2-4 July 1997In this paper, we propose a new M-channel wavelet bases called the cosine-modulated wavelets. We first generalize the theory of two-channel biorthogonal compactly supported wavelet bases to the M-channel case. A sufficient condition for the M-channel perfect reconstruction filter banks to construct M-channel compactly supported wavelet bases is given. By using this condition, a family of orthogonal and biorthogonal M-channel cosine-modulated wavelet bases is constructed by iterations of cosine-modulated filter banks (CMFB). The advantages of the approach are their simple design procedure, efficient implementation and good filter quality. A method for imposing the regularity on the cosine-modulated filter banks is also introduced and design example is given.published_or_final_versio

Theory and design of a class of M-channel IIR cosine-modulated filter banks

This letter proposes a method for designing a class of M-channel, causal, stable, perfect reconstruction (PR) IIR cosine-modulated filter banks (CMFB). The proposed CMFB has the same denominator for all its polyphase components in the prototype filter. Therefore, the PR condition is considerably simplified, and it is relatively simple to satisfy the PR and the casual-stable requirements of the IIR CMFB. Design examples show that the proposed IIR CMFB has sharper cutoff, higher stopband attenuation, and passband flatness than its FIR counterparts, especially when the system delay is small.published_or_final_versio