131 research outputs found

    NGHIÊN CỨU CHẾTẠO VẬT LIỆU COMPOZIT TRÊN CƠ SỞ HỖN HỢP HDPE-LLDPE VÀ TRO BAY Ở TRẠNG THÁI NÓNG CHẢY

    Get PDF
    SUMMARYThe composites of high-density polyethylene/linear  low-density polyethylene (HDPE/LLDPE (75/25 wt/wt) filled by fly ash (FA) with different contents of FA were prepared by melt mixing in a Haake Rheomixer. The relative melt viscosity of the composites increased with increasing the FA content in PE. The mechanical properties of the composites are lower than those of neat PE and decreased with increasingFA content. After modifying FA with organic silane, the relative melt viscosity of the  PE/modified FA (MFA) composites is lower than the PE/original FA (OFA) composites. The tensile strength and the elongation at break of the PE/MFA composites are higher than those of the  PE/OFA composites. The comparison of the properties of the composites filled with MFA and OFA revealed that the composites with MFA showed better reinforcing properties. The MFA disperses in PE matrix more regular than the OFA.SUMMARYSTUDY ON PREPARATION OF COMPOSITE MATERIAL BASED ONHDPE-LLDPE AND FLY ASH IN MELT STATEThe composites of high-density polyethylene/linear  low-density polyethylene (HDPE/LLDPE (75/25 wt/wt) filled by fly ash (FA) with different contents of FA were prepared by melt mixing in a Haake Rheomixer. The relative melt viscosity of the composites increased with increasing the FA content in PE. The mechanical properties of the composites are lower than those of neat PE and decreased with increasingFA content. After modifying FA with organic silane, the relative melt viscosity of the  PE/modified FA (MFA) composites is lower than the PE/original FA (OFA) composites. The tensile strength and the elongation at break of the PE/MFA composites are higher than those of the  PE/OFA composites. The comparison of the properties of the composites filled with MFA and OFA revealed that the composites with MFA showed better reinforcing properties. The MFA disperses in PE matrix more regular than the OFA

    CHọN TạO GIốNG LúA CHấT LƯợNG CAO Và CáC YếU Tố ẢNH HƯởNG ĐếN PHẩM CHấT GạO

    Get PDF
    148 giống lúa cao sản được phân tích về phẩm chất xay chà, các đặc tính vật lý hạt và phẩm chất cơm nhằm xác định các giống lúa có phẩm chất cao cung cấp cho sản xuất và xuất khẩu. Kết quả nghiên cứu cho thấy các giống lúa có phẩm chất cao là MTL325, MTL339, MTL352, MTL356, MTL364, MTL372, MTL378, MTL392.  Thu hoạch lúc 25 NSKT50% cho tỷ lệ gạo nguyên và tỷ lệ gạo bạc bụng tốt nhất.  Vụ Đông Xuân, tỷ lệ gạo trắng và tỷ lệ gạo nguyên cao hơn vụ Hè Thu, tỷ lệ bạc bụng và hàm lượng amylose của vụ Hè Thu thấp hơn vụ Đông Xuân.  Tỷ lệ gạo nguyên của vùng mặn cao hơn vùng phù sa và vùng phèn.  Sấy lúa ở nhiệt độ 40 oC và thời gian sấy từ 7-8 giờ sẽ cho tỷ lệ gạo trắng và gạo nguyên tốt  nhất

    Nghiên cứu đặc trưng, tính chất và hình thái cấu trúc của hạt tổ hợp polylactic axit/chitosan chế tạo bằng phương pháp vi nhũ

    Get PDF
    Nanocomposites are synthesized on the basis of the polymer with combination of the advantages of each polymer composition. In particular, composites based on polylactic acid (PLA) and chitosan (CS) are increasingly interested in the study due to the good adhesion, the ability biodegradable and biocompatible [1-3]. The PLA/CS nanocomposites can be prepared by emulsion method, solution method or electrospinning method, etc. In this study, the PLA/CS nanoparticles were synthesized by emulsion method. These nanoparticles were characterized by Fourier Transform Infrared (FTIR), Differential Scanning Calorimetry (DSC), Zetasizer and Field Emission Scanning Electron Microscopy (FESEM). The compatibility of PLA and CS was investigated by FTIR and DSC. The effect of the component ratio (PLA/CS) on morphology and size distribution of the nanocomposites was determined by FESEM and Zetasizer. The obtained results showed that the particle size range from 100 nm to 300 nm. Keywords. Polylactic acid, chitosan, polyethylene oxide, polycaprolacton, emulsion

    KHẢO SÁT TÌNH HÌNH SẢN XUẤT RAU VÀ HÀM LƯỢNG NO3- TRONG ĐẤT TRỒNG RAU TẠI HUYỆN HƯƠNG TRÀ, TỈNH THỪA THIÊN HUẾ

    Get PDF
    Nghiên cứu được thực hiện trong năm 2009 tại hai xã chuyên sản xuất rau là Hương An và Hương Chữ thuộc huyện Hương Trà, tỉnh Thừa Thiên Huế. Mục đích của nghiên cứu này nhằm khảo sát tình hình sản xuất rau, xác định hàm lượng NO3- trong đất trồng rau và đề xuất giải pháp phù hợp cho phát triển các loại rau ăn lá chính tại địa phương. Kết quả nghiên cứu cho thấy có khá đa dạng các chủng loại rau tại hai xã như hành, ngò, tần ô, xà lách, rau thơm, các giống rau sử dụng chủ yếu là giống địa phương. Qui mô diện tích trồng rau tại các hộ là nhỏ, trung bình khoảng 500 m2/hộ. Người dân đã đầu tư các loại phân bón cho rau, tuy nhiên lượng đạm sử dụng cho rau vẫn còn cao hơn so với các loại phân bón khác. Hàm lượng NO3- trong các loại đất trồng rau dao động từ 19-55mg/100g đất ở tầng 0-20cm và 50-67mg/100g đất ở tầng 20-50cm. Có sự tương quan cao (R2 = 0,9) giữa lượng đạm bón với hàm lượng NO3- trong đất trồng rau tại các điểm nghiên cứu

    ẢNH HƯỞNG CỦA LIỀU LƯỢNG LƯU HUỲNH ĐẾN HAI GIỐNG LẠC L14 VÀ SVL1 TẠI TỈNH QUẢNG BÌNH

    Get PDF
    Tóm tắt: Thí nghiệm gồm có 4 liều lượng lưu huỳnh trên hai giống lạc L14 và SVL1, bố trí theo kiểu ô lớn – ô nhỏ với 3 lần nhắc lại, được thực hiện trong vụ Xuân 2018 trên đất phù sa chuyên trồng lạc của huyện Lệ Thủy, tỉnh Quảng Bình nhằm đánh giá ảnh hưởng của liều lượng lưu huỳnh đến năng suất lạc và hiệu quả kinh tế. Kết quả cho thấy liều lượng lưu huỳnh có ảnh hưởng đến các chỉ tiêu như năng suất và hiệu quả kinh tế của hai giống lạc và một số tính chất hóa học đất. Nhìn chung, liều lượng 30 kg S/ha trên nền 40 kg N + 90 kg P2O5 + 60 kg K2O + 500 kg vôi + 8 tấn phân chuồng/ha cho năng suất và hiệu quả kinh tế đạt cao nhất trên cả hai giống lạc, đồng thời cải thiện được một số tính chất hóa học đất.Từ khóa: giống lạc, hiệu quả kinh tế, năng suất, lưu huỳn

    KHẢO SÁT TÌNH HÌNH SẢN XUẤT RAU VÀ HÀM LƯỢNG NO3- TRONG ĐẤT TRỒNG RAU TẠI HUYỆN HƯƠNG TRÀ, TỈNH THỪA THIÊN HUẾ

    Get PDF
    Nghiên cứu được thực hiện trong năm 2009 tại hai xã chuyên sản xuất rau là Hương An và Hương Chữ thuộc huyện Hương Trà, tỉnh Thừa Thiên Huế. Mục đích của nghiên cứu này nhằm khảo sát tình hình sản xuất rau, xác định hàm lượng NO3- trong đất trồng rau và đề xuất giải pháp phù hợp cho phát triển các loại rau ăn lá chính tại địa phương. Kết quả nghiên cứu cho thấy có khá đa dạng các chủng loại rau tại hai xã như hành, ngò, tần ô, xà lách, rau thơm, các giống rau sử dụng chủ yếu là giống địa phương. Qui mô diện tích trồng rau tại các hộ là nhỏ, trung bình khoảng 500 m2/hộ. Người dân đã đầu tư các loại phân bón cho rau, tuy nhiên lượng đạm sử dụng cho rau vẫn còn cao hơn so với các loại phân bón khác. Hàm lượng NO3- trong các loại đất trồng rau dao động từ 19-55mg/100g đất ở tầng 0-20cm và 50-67mg/100g đất ở tầng 20-50cm. Có sự tương quan cao (R2 = 0,9) giữa lượng đạm bón với hàm lượng NO3- trong đất trồng rau tại các điểm nghiên cứu

    Biến đổi cấu trúc và tính chất của vật liệu compozit polyetylen tỷ trọng cao/bột gỗ gia cường bởi hạt nano TiO2 sau thử nghiệm gia tốc thời tiết

    Get PDF
    In this study, the composites based on high density polyethylene (HDPE) and wood flour (WF) in the presence of PEgMA compatibilizer and TiO2 nanoparticles (in rutile crystal form) were investigated the accelerated weathering test. After 1.900 hours testing, tensile strength of HDPE/WF composite using PEgMA reduced siginificantly (remaining value of 55.98 %). Whereas, the mechanical properties of the HDPE/PEgMA/WF composites slightly decreased thanks to the presence of TiO2 nanoparticles, the retention of tensile strength of composite using TiO2 of 3 wt.% is 81.89 %. Calculating from Fourier transform infrared (FT-IR) spectra showed that the carbonyl index (CI) and wood index (WI) of composites without TiO2 were higher than that of composites containing TiO2. Besides, the discoloration of HDPE/PEgMA/WF composite could lead to lightening on the surface, in fact, this occurs clearly in the case of composites containg TiO2 in comparison with the sample without it. It may imply that TiO2 nanoparticles played a role as the degrading inhibitors of composites under UV irradiation. In addition, observation from the SEM images, the surface of HDPE/PegMA/WF/TiO2 composites was detroyed less than that of composites without TiO2

    Chế tạo và khảo sát tính chất của vật liệu compozit PVC/hỗn hợp than đen và tro bay biến tính

    Get PDF
    In this paper, fly ash was modified by stearic acid and mixed with carbon black N330 (CB) in order to prepare PVC/MFA/CB composites (total amount of MFA and CB is 10 wt% in comparison with PVC weight). The effect of CB loading on the morphology, melt viscosity, mechanical and electrical properties of PVC/MFA/CB composites were studied. It was found that CB improved processing ability, tensile strength, and elongation at break of the PVC/MFA composites. If the ratio of CB/MFA in the PVC/MFA/CB composites is 50/50, the torque of PVC/MFA/CB composites decreased 16 % and elongation at break increased 11 %. Dielectric loss was decrease meanwhile dielectric constant, AC resistivity and breakdown voltage (dielectric strength) of the PVC/MFA/CB composites were increase as raising CB content. Keywords. Polyvinylchlorua, PVC composite, carbon black N330, fly ash, dielectric constant, melt viscosity

    Giám sát từ xa phụ tải điện hộ gia đình bằng ứng dụng Blynk

    Get PDF
    Mục đích của nghiên cứu là giám sát phụ tải điện hộ gia đình thông qua ứng dụng Blynk. Trước tiên, cấu trúc và nguyên lý hoạt động của mô hình giám sát được nghiên cứu cũng như chi tiết các thành phần của mô hình. Sau đó, chương trình điều khiển được lập trình trên phần mềm Arduino IDE và nạp vào chíp Esp8266 thông qua kết nối mạng wifi. Dữ liệu đo lường từ mô hình nghiên cứu được so sánh với dữ liệu đạt được từ ứng dụng EVNSPC CSKH của Tập đoàn Điện lực Việt Nam. Kết quả chỉ ra rằng độ chênh lệch giữa hai ứng dụng là từ 0,98 % đến 5,21% đối với dữ liệu đo trong một ngày và từ 0,4% đến 0,98 % đối với dữ liệu đo trong một tháng

    The role of foreign direct investment in the relationship between economic growth and tourism revenue in Vietnam

    Get PDF
    In this study, we shed light on the causal relationship between tourism revenue (TOV) and economic growth (GDP) during the period from 1995 to 2020 and then analyze the role of Foreign Direct Investment (FDI) in explaining the movement of the TOV-GDP relationship within the Quantile-on-Quantile Regression (QQR) and Granger causality in different quantiles frameworks. The results from the QQR indicate that TOV and FDI remarkably impact economic growth in different quantiles. More specifically, the Granger causality test findings suggest a bidirectional association between the concerned variables at divergent quantiles exists. The consistency of the results uncovers that the estimates are reliable and appropriate for supporting strategies aimed at increasing economic growth in Vietnam
    corecore