Trace Elements in the Hairs of Wintering Members of the 13th Japanese Antarctic Research Expedition.

The concentrations of six trace elements, Hg, Au, Cu, Zn, Sb and Br, in the hairs collected from 10 members of the wintering party of the 13th Japanese Antarctic Research Expedition (1971-1973) during their stay in Antarctica, were measured by neutron activation analysis. The mercury concentration in the hair decreased and its distribution range became narrower during one year-long stay in Antarctica. And its concentration increased and scattered over a wide range again after the party members returned to Japan. The extremely high concentration of antimony suggests that the hair was contaminated by enviromental pollution on board the icebreaker FUJI. No obvious trend was found in the concentrations of other elements during the stay in Antarctica

Epitaxially Stabilized EuMoO3: A New Itinerant Ferromagnet

Synthesizing metastable phase often opens new functions in materials but is a challenging topic. Thin film techniques have advantages to form materials which do not exist in nature since nonequilibrium processes are frequently utilized. In this study, we successfully synthesize epitaxially stabilized new compound of perovskite Eu2+Mo4+O3 as a thin film form by a pulsed laser deposition. Analogous perovskite SrMoO3 is a highly conducting paramagnetic material, but Eu2+ and Mo4+ are not compatible in equilibrium and previous study found more stable pyrochlore Eu23+Mo24+O7 prefers to form. By using isostructural perovskite substrates, the gain of the interface energy between the film and the substrate stabilizes the matastable EuMoO3 phase. This compound exhibits high conductivity and large magnetic moment, originating from Mo 4d2 electrons and Eu 4f7 electrons, respectively. Our result indi-cates the epitaxial stabilization is effective not only to stabilize crystallographic structures but also to from a new compound which contains unstable combinations of ionic valences in bulk form.Comment: 7 pages, 9 figure

Stimulatory Effects of CO2 Laser, Er:YAG Laser and Ga-Al-As Laser on Exposed Dentinal Tubule Orifices

We investigated the effects of lasers irradiation on the exposed dentinal tubule. Human tooth specimens with exposed dentinal tubule orifices were used. Three types of lasers (CO2 laser, Er:YAG laser and Ga-Al-As laser) were employed. The parameters were 1.0 W in continuous-wave mode with an irradiation time of 30 s for the CO2 laser, 30 mJ in continuous-wave mode with an irradiation time of 60 s for the Er:YAG laser, and 1.0 W in continuous-wave mode with an irradiation time of 60 s for the Ga-Al-As laser. A non-irradiated group was used as a control. After laser irradiation, the dentinal surface of each sample was observed using SEM. Afterwards, all samples were immersed in methylene blue dye solution in order to evaluate the penetration of the dye solution and observe the change in dentinal permeability after laser irradiation. SEM observation showed that the control group had numerous exposed dentinal tubule orifices, whereas these orifices were closed in the laser-irradiated groups. There was consistent dye penetration into the pulp chamber in the control group, whereas no dye penetration was evident in the laser-irradiated groups. Therefore, laser appears to be a promising treatment for reducing permeation through exposed dentinal tubules

Stimulatory Effects of CO2 Laser, Er:YAG Laser and Ga-Al-As Laser on Exposed Dentinal Tubule Orifices

We investigated the effects of lasers irradiation on the exposed dentinal tubule. Human tooth specimens with exposed dentinal tubule orifices were used. Three types of lasers (CO2 laser, Er:YAG laser and Ga-Al-As laser) were employed. The parameters were 1.0 W in continuous-wave mode with an irradiation time of 30 s for the CO2 laser, 30 mJ in continuous-wave mode with an irradiation time of 60 s for the Er:YAG laser, and 1.0 W in continuous-wave mode with an irradiation time of 60 s for the Ga-Al-As laser. A non-irradiated group was used as a control. After laser irradiation, the dentinal surface of each sample was observed using SEM. Afterwards, all samples were immersed in methylene blue dye solution in order to evaluate the penetration of the dye solution and observe the change in dentinal permeability after laser irradiation. SEM observation showed that the control group had numerous exposed dentinal tubule orifices, whereas these orifices were closed in the laser-irradiated groups. There was consistent dye penetration into the pulp chamber in the control group, whereas no dye penetration was evident in the laser-irradiated groups. Therefore, laser appears to be a promising treatment for reducing permeation through exposed dentinal tubules

First Case of Cytokine Release Syndrome after Nivolumab for Gastric Cancer

Introduction: Cytokine release syndrome (CRS) is a potentially life-threatening systemic disease that has been observed after treatment with antibodies and adoptive T cell therapies. In this case, we observed nivolumab-induced CRS in a patient with gastric cancer. Case Presentation: A 43-year-old male with advanced gastric cancer was treated with nivolumab as a third-line chemotherapy. He had no history of allergies. Eight days after the first administration of nivolumab, fever, tachycardia, appetite loss and increases in liver and biliary enzymes were observed. Computed tomography revealed neither bile duct obstruction nor progression of liver metastases but showed that there was edema of the Gleason sheath. Histopathological analysis of the liver revealed cholestatic liver injury with CD8+ T lymphocyte and macrophage infiltration. Neither viral infection nor autoimmune disease was revealed. His symptoms were similar to those of CRS observed after T cell therapy. We diagnosed his disease as nivolumab-induced liver injury and cholangitis accompanied by CRS based on his serum cytokine levels. Discussion/Conclusion: To the best of our knowledge, this is the first report of nivolumab-induced CRS in a patient with gastric cancer

Phase II study of ifosfamide, cisplatin, and vindesine combination in advanced non-small cell lung cancer.

Twenty-seven previously untreated patients with unresectable non-small cell lung cancer were treated with a 3-drug combination of ifosfamide, cisplatin, and vindesine as a phase II study. Patients received ifosfamide, 1.3g/m2, on days 1 to 5; cisplatin, 20mg/m2, on days 1 to 5; and vindesine, 3mg/m2, on days 1 and 8; with a sufficient parenteral hydration. Courses were repeated every 4 weeks. Twenty males and seven females with a median age of 61 years were treated and fully evaluated. Five patients had stage IIIA, seven had stage IIIB, and 15 had stage IV disease. One patient with adenocarcinoma achieved a complete response and 16 achieved a partial response, for an overall response rate of 63% (95% confidence limit: 45% to 81%). The median duration of response was 34 weeks (range: 9 to 52 weeks). The median survival time was 58 weeks for patients with IIIA/B disease, and 33 weeks for those with IV disease. The major toxicity was myelosuppression, however, it was generally well-tolerated. These results indicate that the 3-drug combination is active against non-small cell lung cancer and warrants further clinical trials.</p

工具回転機能を有したバニシング加工の基礎的検討: コーテッド超硬工具の適用

金沢大学理工研究域機械工学系工作物表面の平滑化と加工硬化ならびに圧縮残留応力の付与を目的としたバニシング加工について検討した．本加工法はフライス加工と同じ形態で，先端に半球形状を有する工具を高速で回転させながら対象面上を定力下で摺動させることにより仕上げ面を得る．本報では，工具にダイヤモンドよりも製造が容易なコーテッド超硬工具を用いた場合の加工特性について報告する.出版者照会後に全文公

Preferential antitumor effect of the Src inhibitor dasatinib associated with a decreased proportion of aldehyde dehydrogenase 1-positive cells in breast cancer cells of the basal B subtype

<p>Abstract</p> <p>Background</p> <p>Recent studies have suggested that the Src inhibitor dasatinib preferentially inhibits the growth of breast cancer cells of the basal-like subtype. To clarify this finding and further investigate combined antitumor effects of dasatinib with cytotoxic agents, a panel of breast cancer cell lines of various subtypes was treated with dasatinib and/or chemotherapeutic agents.</p> <p>Methods</p> <p>Seven human breast cancer cell lines were treated with dasatinib and/or seven chemotherapeutic agents. Effects of the treatments on c-Src activation, cell growth, cell cycle, apoptosis and the proportion of aldehyde dehydrogenase (ALDH) 1-positive cells were examined.</p> <p>Results</p> <p>The 50%-growth inhibitory concentrations (IC₅₀s) of dasatinib were much lower in two basal B cell lines than those in the other cell lines. The IC₅₀s of chemotherapeutic agents were not substantially different among the cell lines. Dasatinib enhanced antitumor activity of etoposide in the basal B cell lines. Dasatinib induced a G1-S blockade with a slight apoptosis, and a combined treatment of dasatinib with etoposide also induced a G1-S blockade in the basal B cell lines. Dasatinib decreased the expression levels of phosphorylated Src in all cell lines. Interestingly, dasatinib significantly decreased the proportion of ALDH1-positive cells in the basal B cell lines but not in the other cell lines.</p> <p>Conclusions</p> <p>The present study indicates that dasatinib preferentially inhibits the growth of breast cancer cells of the basal B subtype associated with a significant loss of putative cancer stem cell population. A combined use of dasatinib with etoposide additively inhibits their growth. Further studies targeting breast cancers of the basal B subtype using dasatinib with cytotoxic agents are warranted.</p

工具回転機能を有したダイヤモンドチップバニシング加工の基礎的検討

金沢大学理工研究域機械工学系立方体形状の工作物の表面仕上げ法として，表面の平滑化，加工硬化ならびに圧縮残留応力の付与を目指したバニシング加工法について検討する．本加工法はフライス加工の要領で，先端に半球形状を有するダイヤモンドチップを高速で回転させながら，対象面上を定力下で摺動させる．本報では，高硬度材の平坦面に本加工法を適用した場合の基礎的な加工特性について，仕上げ面形状の観点から評価した結果を報告する．The effectiveness of a diamond burnishing method with rotating tool, which is proposed by the authors, is investigated. A proposed hybrid-type parallel mechanism with spherical 5-degree-of-freedom range and force control was used as a burnishing machine. A diamond tipped tool, which is rotated by the high-speeed-motor spindle, was used as a burnishing tool. A hardened die steel surface were targeted. The fundamental characteristics of the proposed method were evaluated by the surface profile and appearance of the burnishing mark and metallographic structure of the burnished surface layer, and the advantages of the proposed method were clarified by comparing with the conventional method, which is without the tool rotation.出版者照会後に全文公