Fabrication of High‐Quality Thin Single‐Crystal Diamond Membranes with Low Surface Roughness

Certain aspects before and during the fabrication of single-crystal diamond (SCD) membranes are highlighted, which are decisive to obtain high-quality membranes with low surface roughness values around 0.2 nm on a small area scale. In addition to the requirements for the starting material, including a high planarity and a moderate surface roughness, the importance of cleaning processes to minimize particles and impurities before and during the structuring is emphasized. With the help of a planarization procedure, consisting of a combination of different Ar/Cl$_2$ recipes with low etch rates, surface defects like grooves due to polishing are minimized and smooth surfaces are acquired. Severe micromasking can be prevented by the application of a cyclic Ar/Cl$_2$ + O$_2$ recipe, allowing finally the fabrication of defect-minimized and planarized SCD membranes in the thickness range between few microns and a few hundred nanometers. The high quality of the structured SCD membranes is evidenced with a morphological as well as an optical characterization via fiber-based microcavity measurements

Does adult ADHD interact with COMT val 158 met genotype to influence working memory performance?

Peer reviewedPostprin

Scanning cavity microscopy of a single-crystal diamond membrane

Spin-bearing color centers in the solid state are promising candidates for the realization of quantum networks and distributed quantum computing. A remaining key challenge is their efficient and reliable interfacing to photons. Incorporating minimally processed membranes into open-access microcavities represents a promising route for Purcellenhanced spin-photon interfaces: it enables significant emission enhancement and efficient photon collection, minimizes deteriorating influence on the quantum emitter, and allows for full spatial and spectral tunability, key for controllably addressing suitable emitters with desired optical and spin properties. Here, we study the properties of a high-finesse fiber Fabry-P\'erot microcavity with integrated single-crystal diamond membranes by scanning cavity microscopy. We observe spatially resolved the effects of the diamond-air interface on the cavity mode structure: a strong correlation of the cavity finesse and mode structure with the diamond thickness and surface topography, significant transverse-mode mixing under diamond-like conditions, and mode-character-dependent polarization-mode splitting. Our results reveal the influence of the diamond surface on the achievable Purcell enhancement, which helps to clarify the route towards optimized spin-photon interfaces

Scanning cavity microscopy of a single-crystal diamond membrane

Spin-bearing color centers in the solid state are promising candidates for the realization of quantum networks and distributed quantum computing. A remaining key challenge is their efficient and reliable interfacing to photons. Incorporating minimally processed membranes into open-access microcavities represents a promising route for Purcellenhanced spin-photon interfaces: it enables significant emission enhancement and efficient photon collection, minimizes deteriorating influence on the quantum emitter, and allows for full spatial and spectral tunability, key for controllably addressing suitable emitters with desired optical and spin properties. Here, we study the properties of a high-finesse fiber Fabry-Pérot microcavity with integrated single-crystal diamond membranes by scanning cavity microscopy. We observe spatially resolved the effects of the diamond-air interface on the cavity mode structure: a strong correlation of the cavity finesse and mode structure with the diamond thickness and surface topography, significant transverse-mode mixing under diamond-like conditions, and mode-character-dependent polarization-mode splitting. Our results reveal the influence of the diamond surface on the achievable Purcell enhancement, which helps to clarify the route towards optimized spin-photon interfaces

Fabrication and Characterization of Single-Crystal Diamond Membranes for Quantum Photonics with Tunable Microcavities

The development of quantum technologies is one of the big challenges in modern research. Acrucial component for many applications is an efficient, coherent spin–photon interface, and coupling single-color centers in thin diamond membranes to a microcavity is a promising approach. To structure such micrometer thin single-crystal diamond (SCD) membranes with a good quality, it is important to minimize defects originating from polishing or etching procedures. Here, we report on the fabrication of SCD membranes, with various diameters, exhibiting a low surface roughness down to 0.4 nm on a small area scale, by etching through a diamond bulk mask with angled holes. A significant reduction in pits induced by micromasking and polishing damages was accomplished by the application of alternating Ar/Cl2 + O2 dry etching steps. By a variation of etching parameters regarding the Ar/Cl2 step, an enhanced planarization of the surface was obtained, in particular, for surfaces with a higher initial surface roughness of several nanometers. Furthermore, we present the successful bonding of an SCD membrane via van der Waals forces on a cavity mirror and perform finesse measurements which yielded values between 500 and 5000, depending on the position and hence on the membranethickness. Our results are promising for, e.g., an efficient spin–photon interface

Microwave Control of the Tin-Vacancy Spin Qubit in Diamond with a Superconducting Waveguide

Group-IV color centers in diamond are promising candidates for quantum networks due to their dominant zero-phonon line and symmetry-protected optical transitions that connect to coherent spin levels. The negatively charged tin-vacancy (SnV) center possesses long electron spin lifetimes due to its large spin-orbit splitting. However, the magnetic dipole transitions required for microwave spin control are suppressed, and strain is necessary to enable these transitions. Recent work has shown spin control of strained emitters using microwave lines that suffer from Ohmic losses, restricting coherence through heating. We utilize a superconducting coplanar waveguide to measure SnV centers subjected to strain, observing substantial improvement. A detailed analysis of the SnV center electron spin Hamiltonian based on the angle-dependent splitting of the ground and excited states is performed. We demonstrate coherent spin manipulation and obtain a Hahn echo coherence time of up to $T_2 = 430\,\mu$s. With dynamical decoupling, we can prolong coherence to $T_2 = 10\,$ms, about six-fold improved compared to earlier works. We also observe a nearby coupling $^{13}\mathrm{C}$ spin which may serve as a quantum memory. This substantiates the potential of SnV centers in diamond and demonstrates the benefit of superconducting microwave structures.Comment: Main: 9 pages, 5 figures, 1 tables; Supplement: 15 pages, 10 figures, 1 tabl

Sympathy for the Devil: A Conservation Strategy for Devil and Manta Rays

Background  International trade for luxury products, medicines, and tonics poses a threat to both terrestrial and marine wildlife. The demand for and consumption of gill plates (known as Peng Yu Sai, “Fish Gill of Mobulid Ray”) from devil and manta rays (subfamily Mobulinae, collectively referred to as mobulids) poses a significant threat to these marine fishes because of their extremely low productivity. The demand for these gill plates has driven an international trade supplied by largely unmonitored and unregulated catches from target and incidental fisheries around the world. Scientific research, conservation campaigns, and legal protections for devil rays have lagged behind those for manta rays despite similar threats across all mobulids. Methods  To investigate the difference in attention given to devil rays and manta rays, we examined trends in the scientific literature and updated species distribution maps for all mobulids. Using available information on target and incidental fisheries, and gathering information on fishing and trade regulations (at international, national, and territorial levels), we examined how threats and protective measures overlap with species distribution. We then used a species conservation planning approach to develop the Global Devil and Manta Ray Conservation Strategy, specifying a vision, goals, objectives, and actions to advance the knowledge and protection of both devil and manta rays. Results and Discussion  Our literature review revealed that there had been nearly 2.5-times more “manta”-titled publications, than “mobula” or “devil ray”-titled publications over the past 4.5 years (January 2012–June 2016). The majority of these recent publications were reports on occurrence of mobulid species. These publications contributed to updated Area of Occupancy and Extent of Occurrence maps which showed expanded distributions for most mobulid species and overlap between the two genera. While several international protections have recently expanded to include all mobulids, there remains a greater number of national, state, and territory-level protections for manta rays compared to devil rays. We hypothesize that there are fewer scientific publications and regulatory protections for devil rays due primarily to perceptions of charisma that favour manta rays. We suggest that the well-established species conservation framework used here offers an objective solution to close this gap. To advance the goals of the conservation strategy we highlight opportunities for parity in protection and suggest solutions to help reduce target and bycatch fisheries

Fabrication and Characterization of Single-Crystal Diamond Membranes for Quantum Photonics with Tunable Microcavities

The development of quantum technologies is one of the big challenges in modern research. A crucial component for many applications is an efficient, coherent spin–photon interface, and coupling single-color centers in thin diamond membranes to a microcavity is a promising approach. To structure such micrometer thin single-crystal diamond (SCD) membranes with a good quality, it is important to minimize defects originating from polishing or etching procedures. Here, we report on the fabrication of SCD membranes, with various diameters, exhibiting a low surface roughness down to 0.4 nm on a small area scale, by etching through a diamond bulk mask with angled holes. A significant reduction in pits induced by micromasking and polishing damages was accomplished by the application of alternating Ar/Cl2 + O2 dry etching steps. By a variation of etching parameters regarding the Ar/Cl2 step, an enhanced planarization of the surface was obtained, in particular, for surfaces with a higher initial surface roughness of several nanometers. Furthermore, we present the successful bonding of an SCD membrane via van der Waals forces on a cavity mirror and perform finesse measurements which yielded values between 500 and 5000, depending on the position and hence on the membrane thickness. Our results are promising for, e.g., an efficient spin–photon interface